Mace cams ordered.

[BSR-1]

Originally Posted by simt3k

My gf is from the Texas and I am a Canadian from Alberta. You Americans always make the best stuff in the world. I wish I was there in the development of these cams. God bless Americans! God bless America!

I can't take any credit for the stuff on this forum but I'd like to thank you for the props.
It's rare to hear praise for America rather than Anti-American propaganda.

Thanks!

[kjkjr27]

Well technically aren't the cams Australian made lol

[Yellow_Glide]

Originally Posted by menendez1293

Hey yellow glide any update on when these will be done?

I say you just leave your car down there till after the Sunshine State Rally on March 1-3 so that tracy can show everyone what this beast can do

March 1 wil have the car at Circiit of the Americas and at Texas Revolution in April. Just waiting on the clutch to arrive - darn FedEx.

[BSR-1]

Originally Posted by kjkjr27

Well technically aren't the cams Australian made lol

You are right, of course, but the testing and development took place in Florida.

Also the forum doesn't have a smilie with the Australian flag.

[Tulkas]

Originally Posted by BSR-1

You are right, of course, but the testing and development took place in Florida.

Also the forum doesn't have a smilie with the Australian flag.

Testing and development took place down under too lol.
Took months for Steve to make the correct grind and test it on our cars here.
We took the risk of putting these cams in initially.
Dont be too selfish :(

Yellow_glide how come you need a new clutch? Theoretically and practically it should handle more power if you dont keep the revs at the redline always.

[Yellow_Glide]

Hi Tulkas!! Just want to make sure the clutch can handle the new power. I did a motor project a couple of years ago and the clutch lasted 53 miles after I got it home - learned from that one. Besides, with all of the SC options going around I would hate to see a stock clutch create some problems....

[Lil' Nasty]

Originally Posted by Yellow_Glide

March 1 wil have the car at Circiit of the Americas and at Texas Revolution in April. Just waiting on the clutch to arrive - darn FedEx.

Ooo what clutch are you getting YG?

[BSR-1]

Originally Posted by Tulkas

Testing and development took place down under too lol.
Took months for Steve to make the correct grind and test it on our cars here.
We took the risk of putting these cams in initially.
Dont be too selfish :(

Yellow_glide how come you need a new clutch? Theoretically and practically it should handle more power if you dont keep the revs at the redline always.

I'm sorry if I come off as selfish. That was not my intention.
I realize they put in the R&D to get your motors going down under but apparently that didn't translate as well to ours. Hence the collaboration between Mace/Tracy/Vince.

I just happen to work in an industry where I see a lot of Anti American. So it was refreshing to hear someone from another country that was Pro American.

I have friends all over the world and I'm not against anyone. I would hope to call you a friend too!

[SixCyl]

Originally Posted by BSR-1

I'm sorry if I come off as selfish. That was not my intention.
I realize they put in the R&D to get your motors going down under but apparently that didn't translate as well to ours. Hence the collaboration between Mace/Tracy/Vince.

I just happen to work in an industry where I see a lot of Anti American. So it was refreshing to hear someone from another country that was Pro American.

I have friends all over the world and I'm not against anyone. I would hope to call you a friend too!

No worries man. I think everyone here knows you weren't be mean spirited.

[esponda]

Tax refund can't come soon enough then I'll do my install
Need to get the new grind still...

[Yellow_Glide]

Originally Posted by Lil' Nasty

Ooo what clutch are you getting YG?

Going with a Spec for now and see how that does. Missed Tulkas' comment about the redline - dyno graph will me the potential shift points - but hey, if your not willing to spin it up what's the point! Lol.

[Yellow_Glide]

Originally Posted by esponda

Tax refund can't come soon enough then I'll do my install
Need to get the new grind still...

Lol, you have some catching up to do!!! We need to get more cammed v6s!

[Tulkas]

Originally Posted by BSR-1

I'm sorry if I come off as selfish. That was not my intention.
I realize they put in the R&D to get your motors going down under but apparently that didn't translate as well to ours. Hence the collaboration between Mace/Tracy/Vince.

I just happen to work in an industry where I see a lot of Anti American. So it was refreshing to hear someone from another country that was Pro American.

I have friends all over the world and I'm not against anyone. I would hope to call you a friend too!

Hey mate, didnt mean to attack you, wasnt my intention either. Just trying to add us down unders as small helpers too

[Yellow_Glide]

Originally Posted by Tulkas

Just trying to add us down unders as small helpers too

If it weren't for you boys down under - I wouldn't have cams! You were the real pioneers in this. You definitely deserve more than just a little credit!