Iowa Members Get In Here! - Page 364 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

amanc96 · 01-24-2013, 01:31 PM

Quote:

Originally Posted by HRD_WRK

He did it at Livernois, where he had other prior work done.
They are a great outfit.

I'm guessing this is the one in Michigan? I was hoping for someone local.

its a syn · 01-24-2013, 01:36 PM

Quote:

Originally Posted by amanc96

I'm guessing this is the one in Michigan? I was hoping for someone local.

Your correct, try Karl's performance maybe. Des Moines

BenningJ · 01-24-2013, 03:09 PM

Well so far it is looking like we could all get together on Sunday Feb. 10th around Noon or 12:30?

What say ye?

xtreme2s · 01-24-2013, 10:07 PM

Yes. I had it done by Livernois. Since I also was having suspension work done at same time it just was easier to use them. they also re dyno ran it to correct speedo

I would take it now to Karl Performance due to dyno In IC otherwise Fountain Trans prob could do the work but still then need speedo corrected via dyno, so that again seems Karl Perf as best complete option

xtreme2s · 01-24-2013, 10:19 PM

I'm also considering a rear gear swap, some simple performance mods added to another car.....yup, I also have a 09 Shelby mustang vert, and thinking 4:10 gears, CAI, long tube headers, pipes, and pulley kit. Then dyno tune after. Karl Performance is where I will go on this should I go for it. I have quote from Livernois also do do this. But since KP has arrived, no logical reason to go so far away.

At the time I did my Camaro, all the total complete shops were/are a distance to go.
.....Lingenfelter, Livernois, and others.

rberns · 01-25-2013, 05:50 AM

Seems like Cool Concepts runs on very limited hours. They aren't open today (Friday), but on the days they are open its from 1200 to 1700 hours. Might have to try again this Wednesday.

amanc96 · 01-25-2013, 11:08 AM

Quote:

Originally Posted by its a syn

Your correct, try Karl's performance maybe. Des Moines

Quote:

Originally Posted by xtreme2s

Yes. I had it done by Livernois. Since I also was having suspension work done at same time it just was easier to use them. they also re dyno ran it to correct speedo

I would take it now to Karl Performance due to dyno In IC otherwise Fountain Trans prob could do the work but still then need speedo corrected via dyno, so that again seems Karl Perf as best complete option

Thanks guys. I'll check them out when the time comes. Probably won't be til summer anyways.

Time2run · 01-25-2013, 11:36 AM

Anyone going to the Wild Wade's swap meet at the state fairgrounds on Sunday?

its a syn · 01-25-2013, 04:33 PM

I know this is a bit early to get talking about car shows and such, but this year there is going to be a coast to coast Hwy 30 Centennial cruise. It starts on both coasts and meets in Kearney, NE. It has a leg from Rochelle- Dixon, IL to Ames, IA on Friday June 28. 224 Miles for this leg then 284 mile leg from Ames to Grand Island, NE. Sounds like a neat cruise to be part of as it crosses Iowa. Here is a link http://www.lincolnhighwayassoc.org

its a syn · 01-25-2013, 05:46 PM

Quote:

Originally Posted by Time2run

Anyone going to the Wild Wade's swap meet at the state fairgrounds on Sunday?

If I have some time to burn on Sunday I might get there. The way it looks now I will most likely be working.

toesuf94 · 01-27-2013, 01:17 PM

Spent yesterday on the car. Paint is polished and buffed within an inch of it's life. Pulled the front wheels and tires, polished and cleaned the suspension, wheels and brakes. Interior is 75% done. This show in Monticello had better be worth it!

Well, even if it is not, I had a great day with my dad.

INTIMIDAT3R · 01-28-2013, 12:13 PM

Quote:

Originally Posted by BenningJ

Well so far it is looking like we could all get together on Sunday Feb. 10th around Noon or 12:30?

What say ye?

I say we get together at Meswaki or Des Moines. We had the lunch in Cedar Rapids last time.

Then next year we can do it up here in Waterloo/Cedar Falls. I can reserve a party room at Pizza Ranch or we can do the Casino.

BenningJ · 01-28-2013, 12:54 PM

If we are going to meet at a central location might as well be at Marshalltown. I don't have any problems with going to CR or Des Moines. I will not go to Mesquaki though. Their buffet sucks and it is expensive.

BenningJ · 01-28-2013, 12:55 PM

Oh and I am now at 3300 kickass miles on my SS.

01-24-2013, 03:09 PM	#5085
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Well so far it is looking like we could all get together on Sunday Feb. 10th around Noon or 12:30? What say ye? __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

01-25-2013, 05:50 AM	#5088
rberns Drives: 2011 Camaro 2SS/RS Join Date: Apr 2011 Location: US Posts: 3,291 View My Garage	Seems like Cool Concepts runs on very limited hours. They aren't open today (Friday), but on the days they are open its from 1200 to 1700 hours. Might have to try again this Wednesday. __________________ 2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan, Holley fuel rail, Proform valve covers, relocated coil packs

01-25-2013, 11:36 AM	#5090
Time2run Drives: 2010 IOM Camaro 2SS Join Date: Aug 2011 Location: Oskaloosa,IA Posts: 23 View My Garage	Anyone going to the Wild Wade's swap meet at the state fairgrounds on Sunday? __________________ 2010 Camaro SS, IOM, Whipple 2.9 Volant cai

01-25-2013, 04:33 PM	#5091
its a syn B.O.D. 02/16/10 Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010 Location: Albia,Iowa Posts: 3,959 View My Garage	I know this is a bit early to get talking about car shows and such, but this year there is going to be a coast to coast Hwy 30 Centennial cruise. It starts on both coasts and meets in Kearney, NE. It has a leg from Rochelle- Dixon, IL to Ames, IA on Friday June 28. 224 Miles for this leg then 284 mile leg from Ames to Grand Island, NE. Sounds like a neat cruise to be part of as it crosses Iowa. Here is a link http://www.lincolnhighwayassoc.org __________________

01-27-2013, 01:17 PM	#5093
toesuf94 Drives: THR #11 E-force supercharged Join Date: Jul 2008 Location: Cedar Rapids, IA Posts: 4,746	Spent yesterday on the car. Paint is polished and buffed within an inch of it's life. Pulled the front wheels and tires, polished and cleaned the suspension, wheels and brakes. Interior is 75% done. This show in Monticello had better be worth it! Well, even if it is not, I had a great day with my dad. __________________ Cars and women are both going to give you problems...but you can pay somebody else to fix your car!

01-24-2013, 10:07 PM	#5086
xtreme2s Drives: Livernois Motorsports 2010 2SS/RS Join Date: Feb 2012 Location: Iowa Posts: 445 View My Garage	Yes. I had it done by Livernois. Since I also was having suspension work done at same time it just was easier to use them. they also re dyno ran it to correct speedo I would take it now to Karl Performance due to dyno In IC otherwise Fountain Trans prob could do the work but still then need speedo corrected via dyno, so that again seems Karl Perf as best complete option

01-24-2013, 10:19 PM	#5087
xtreme2s Drives: Livernois Motorsports 2010 2SS/RS Join Date: Feb 2012 Location: Iowa Posts: 445 View My Garage	I'm also considering a rear gear swap, some simple performance mods added to another car.....yup, I also have a 09 Shelby mustang vert, and thinking 4:10 gears, CAI, long tube headers, pipes, and pulley kit. Then dyno tune after. Karl Performance is where I will go on this should I go for it. I have quote from Livernois also do do this. But since KP has arrived, no logical reason to go so far away. At the time I did my Camaro, all the total complete shops were/are a distance to go. .....Lingenfelter, Livernois, and others.

01-28-2013, 12:54 PM	#5095
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	If we are going to meet at a central location might as well be at Marshalltown. I don't have any problems with going to CR or Des Moines. I will not go to Mesquaki though. Their buffet sucks and it is expensive. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

01-28-2013, 12:55 PM	#5096
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Oh and I am now at 3300 kickass miles on my SS. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Properautocare Coupon Sale for Camaro5 Members	Angelo@Autopia	Wash/Wax/Detailing and Cosmetic Maintenance Parts	2	12-11-2009 10:38 AM
STS Turbo - Exclusive Offer for Camaro 5 Members - Ends Oct 10th!!!	ZZcamaro	Forced Induction	64	10-19-2009 01:16 PM
Messages to more than 5 members & Social Groups	heinzd01	Site Related Announcements / Suggestions / Feedback / Questions	5	09-16-2009 09:22 AM