2010 Camaro SEMA Car by Montage Motoring and Defenderworx - Page 32 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Defenderworx · 06-23-2009, 12:41 PM

Hey everyone, here are some pictures of the Orange Camaro that came in our shop yesterday just as I had promised. We tried on a couple of our different pieces so you guys could get a feel for the different colored pieces on a different colored car. Bear with me while I try to upload them I'll do it as fast as I can. We also should be able to put some more pieces on it by next week when we get some of the parts back from GM that are currently getting licensed right now. Enjoy!

Defenderworx · 06-23-2009, 12:53 PM

Here are a couple pictures of the Orange Camaro with our Window Louvers.

fsuredneck · 06-23-2009, 01:05 PM

Can we see pics of the louvers from inside the car? Thanks

Defenderworx · 06-23-2009, 01:10 PM

The next set of pictures are of the Camaro Logo Door Sill in both Chrome and Black Powder Coat.

Defenderworx · 06-23-2009, 01:35 PM

The first couple pictures in this set are of the Black Powder Coat Reverse Light Bezels, and the next two are the Black Powder Coat Side Vent Inserts.

pinkcamaro10 · 06-23-2009, 01:40 PM

ahem.... concept shifter???

also, would i beable to order stuff without being chromed or powdercoated?? i would probably want to paint them myself.

Defenderworx · 06-23-2009, 01:45 PM

Quote:

Originally Posted by pinkcamaro10

ahem.... concept shifter???

also, would i beable to order stuff without being chromed or powdercoated?? i would probably want to paint them myself.

Ha give us a couple weeks and it should be totally done. And yes no problem you could always order a part from us raw (not chromed or powder coated) so you can paint it pink

or do whatever you want with it yourself.

Defenderworx · 06-23-2009, 01:52 PM

Okay everyone this last set of pictures are of the Chrome Locking Fuel Door and Black Powder Coat Locking Fuel Door on the Orange Camaro. Keep in mind we did not fully install these yet, we just took pictures, which is why the door does not look like it is laying flat, or flush, in these pictures. They were just taken as a way to give you all an idea of what they will look like. Thanks!

GothamCamaro · 06-23-2009, 01:55 PM

Quote:

Originally Posted by pinkcamaro10

ahem.... concept shifter???

also, would i beable to order stuff without being chromed or powdercoated?? i would probably want to paint them myself.

Would you stop trying to make your Pink Camaro even more awesome in it's uniqueness!

And Defenderworx, thanks for posting the black lockable full door, it gives me an idea of what it will look like on my Camaro.

Defenderworx · 06-23-2009, 03:05 PM

Quote:

Originally Posted by GothamCamaro

Would you stop trying to make your Pink Camaro even more awesome in it's uniqueness!

And Defenderworx, thanks for posting the black lockable full door, it gives me an idea of what it will look like on my Camaro.

Yeah shes definetly tryin to out do us all, and no problem I'll keep trying to post things every chance I get.

Camaroyoung · 06-23-2009, 03:29 PM

Quote:

Originally Posted by Defenderworx

Well he ordered the decals which are just stickers not made through our company, i don't know where he got those. We sell the Side Vent Inserts in Chrome and Black Powder coat and those are made of 6061 Aluminum Billet. They will be available through Addicted Auto Accessories e-bay store http://stores.shop.ebay.com/Addicted...__W0QQ_armrsZ1 by the end of the week and www.camarocollection.com in about two weeks. They will be roughly priced around $189. Same thing with the Bowties except those i believe will be priced around $160. (I'm not exactly sure about pricing because they are getting licensed by GM as we speak and GM sets the prices). As for the door handles, those are still in the early stage of production so those wont even be ready for another few weeks at least.

That's great! I want the chrome side vent inserts and chrome bowties. I guess I'll have to wait for the Door handles.

moto-camaro · 06-23-2009, 04:17 PM

d-worx, someone mentioned in another thread about a brushed alluminum panel or vinyl between the tallights. chrome would work as well, any chance you guys will be doing something like that?
a photoshop of it looked pretty cool.

Defenderworx · 06-23-2009, 04:26 PM

Quote:

Originally Posted by Camaroyoung

That's great! I want the chrome side vent inserts and chrome bowties. I guess I'll have to wait for the Door handles.

Yeah but we're working as fast as we can for you guys!!!

Quote:

Originally Posted by moto-camaro

d-worx, someone mentioned in another thread about a brushed alluminum panel or vinyl between the tallights. chrome would work as well, any chance you guys will be doing something like that?
a photoshop of it looked pretty cool.

Unfortunately I do not think we will be doing anything similar to that, sorry. But I'm sure if you give it more time someone will eventually do something like that.

Supermans · 06-24-2009, 03:32 AM

Quote:

Originally Posted by pinkcamaro10

ahem.... concept shifter???

also, would i beable to order stuff without being chromed or powdercoated?? i would probably want to paint them myself.

Gm should be paying pink for advice on what to offer.. I'm quite sure that the concept shifter would sell like hotcakes if it was offered..

06-23-2009, 12:41 PM	#435
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	Hey everyone, here are some pictures of the Orange Camaro that came in our shop yesterday just as I had promised. We tried on a couple of our different pieces so you guys could get a feel for the different colored pieces on a different colored car. Bear with me while I try to upload them I'll do it as fast as I can. We also should be able to put some more pieces on it by next week when we get some of the parts back from GM that are currently getting licensed right now. Enjoy! Attached Images __________________

06-23-2009, 12:53 PM	#436
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	Here are a couple pictures of the Orange Camaro with our Window Louvers. Attached Images __________________

06-23-2009, 01:10 PM	#438
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	The next set of pictures are of the Camaro Logo Door Sill in both Chrome and Black Powder Coat. Attached Images __________________

06-23-2009, 01:35 PM	#439
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	The first couple pictures in this set are of the Black Powder Coat Reverse Light Bezels, and the next two are the Black Powder Coat Side Vent Inserts. Attached Images __________________

06-23-2009, 01:40 PM	#440
pinkcamaro10 2G1FC1EV1A9110079 Drives: 2010 2LT/RS, 2013 2SS/RS 1LE Join Date: Jun 2008 Location: Arizona Posts: 4,752 View My Garage	ahem.... concept shifter??? also, would i beable to order stuff without being chromed or powdercoated?? i would probably want to paint them myself. __________________

06-23-2009, 01:05 PM	#437
fsuredneck Drives: 2007 Ford Mustang Join Date: Sep 2008 Location: Kissimmee, FL Posts: 277 View My Garage	Can we see pics of the louvers from inside the car? Thanks

06-23-2009, 01:52 PM	#442
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	Okay everyone this last set of pictures are of the Chrome Locking Fuel Door and Black Powder Coat Locking Fuel Door on the Orange Camaro. Keep in mind we did not fully install these yet, we just took pictures, which is why the door does not look like it is laying flat, or flush, in these pictures. They were just taken as a way to give you all an idea of what they will look like. Thanks! Attached Images __________________

06-23-2009, 04:17 PM	#446
moto-camaro CEO of the Internet Drives: the Roflcopter Join Date: Mar 2009 Location: Halifax, NS Posts: 1,282 View My Garage	d-worx, someone mentioned in another thread about a brushed alluminum panel or vinyl between the tallights. chrome would work as well, any chance you guys will be doing something like that? a photoshop of it looked pretty cool.