TSP Headers Question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SolidGoldBomb · 03-11-2013, 04:15 PM

This is perhaps a foolish question, but are the O2 plug-n-play extensions necessary for the TSP 1 7/8" LT headers? I'm about to the pull the trigger on them, but would hate to find I was lacking necessary parts when it came time for installation. Also, am I correct in my assumption that the "catted extensions" are high flow cats?

camaro actual · 03-11-2013, 04:18 PM

catted extensions are indeed hi flo cats, the O2 extensions are needed unless you are capable of splicing and wireing up the original ones somehow. I.E. get them lol

biggerisbetter · 03-11-2013, 04:19 PM

yeah i would definately buy them haha.

Denis · 03-11-2013, 04:40 PM

Yup. You need em. No chance the stock ones will reach.

SolidGoldBomb · 03-11-2013, 06:27 PM

Thanks for the knowledge.

Jason 98 TA · 03-12-2013, 10:18 AM

These guys are right on! You will need the extensions.

Dznts · 03-12-2013, 10:43 AM

i would like to know where to even get these headers. Texas Speed shows them out of stock till mid april.

ForgedReality · 03-12-2013, 11:18 AM

I bought them, and they're effing SWEET. Mine came with the extensions, but I think I ordered them along with the headers. I don't really remember. XD

They have steel tags with the Texas Speed & Performance logo on them, tig welded at the corners. I dremeled them off, and smoothed out the weld spots nice and clean. Then I had them ceramic coated satin black. So sexy. I haven't put them on yet because the weather has been shitty, but it's among my list of summer mods.

Gonna do it in the driveway on jack stands. Pretty sure this isn't gonna be a problem but has anybody tried putting long tubes on in the driveway?

biggerisbetter · 03-12-2013, 12:18 PM

Quote:

Originally Posted by ForgedReality

I bought them, and they're effing SWEET. Mine came with the extensions, but I think I ordered them along with the headers. I don't really remember. XD

They have steel tags with the Texas Speed & Performance logo on them, tig welded at the corners. I dremeled them off, and smoothed out the weld spots nice and clean. Then I had them ceramic coated satin black. So sexy. I haven't put them on yet because the weather has been shitty, but it's among my list of summer mods.

Gonna do it in the driveway on jack stands. Pretty sure this isn't gonna be a problem but has anybody tried putting long tubes on in the driveway?

you should have no problem it is easier on a lift but a in a driveway on ramps or jackstands is completely doable

Denis · 03-12-2013, 02:23 PM

I used a lift to do mine. But it was super easy. You shouldn't have any problems.

camaro actual · 03-13-2013, 10:21 AM

I did mine in my garage on jack stands, completly doable.

03-11-2013, 04:15 PM	#1
SolidGoldBomb Drives: '11 LS3 2SS/RS, '07 Accord SE Join Date: May 2009 Location: Rapid City, SD Posts: 83 View My Garage	TSP Headers Question This is perhaps a foolish question, but are the O2 plug-n-play extensions necessary for the TSP 1 7/8" LT headers? I'm about to the pull the trigger on them, but would hate to find I was lacking necessary parts when it came time for installation. Also, am I correct in my assumption that the "catted extensions" are high flow cats? __________________ 3/31/11 Ordered RJT LS3 2SS/RS (1100) 4/7/11 Make that IOM, RJT constrained indefinitely :( 4/7/11 Status 2000 4/15/11 Status 3000, TPW 5/2 4/22/11 Status 3300 4/27/11 Status 3400 5/4/11 Statuses 3800, 4000, 4150, 4B00 5/28/11 Picked her up!

03-11-2013, 04:18 PM	#2
camaro actual Drives: 2010 Camaro 2SS/RS L99 Join Date: Sep 2012 Location: san antonio TX Posts: 154	catted extensions are indeed hi flo cats, the O2 extensions are needed unless you are capable of splicing and wireing up the original ones somehow. I.E. get them lol __________________ TSP 2'' headers W/ hi Flo cats, CAI intake w/ apex scoop and wash relocate kit, VMAX TB, RX catch can, PFADT sways, NOWEEDS

03-11-2013, 04:19 PM	#3
biggerisbetter lll Drives: 2010 camaro ss L99 Join Date: Jan 2013 Location: new orleans Posts: 1,176	yeah i would definately buy them haha. __________________ PERFORMANCE DYNATECH LT 1 7/8 HEADERS, CATLESS MID PIPES, CORSA CATBACK, CAI. COLD AIR INTAKE w/ SCOOP, 1LE 3:91 GEARS, LETHAL RACING PROWLER CAM, LETHAL RACING DYNO TUNE, ENERGY CRADDLE BUSHING INSERTS, PADDLE SHIFTER RELOCATE KIT, 449RWHP/438TQ APPEARANCE COPO HOOD, ZL1 SPOILER, SLP BLACKOUT PANEL, PLASTI DIP WHEELS, HERITAGE GRILL, RETRO SS EMBLEMS, WEATHER TECH FLOOR MATS, ORANGE STITCHING

03-11-2013, 04:40 PM	#4
Denis Drives: 2010 SS Join Date: May 2012 Location: Yorktown Heights, NY Posts: 7,695 View My Garage	Yup. You need em. No chance the stock ones will reach. __________________

03-11-2013, 06:27 PM	#5
SolidGoldBomb Drives: '11 LS3 2SS/RS, '07 Accord SE Join Date: May 2009 Location: Rapid City, SD Posts: 83 View My Garage	Thanks for the knowledge. __________________ 3/31/11 Ordered RJT LS3 2SS/RS (1100) 4/7/11 Make that IOM, RJT constrained indefinitely :( 4/7/11 Status 2000 4/15/11 Status 3000, TPW 5/2 4/22/11 Status 3300 4/27/11 Status 3400 5/4/11 Statuses 3800, 4000, 4150, 4B00 5/28/11 Picked her up!

03-12-2013, 10:18 AM	#6
Jason 98 TA Drives: Camaro Join Date: Apr 2009 Location: Texas Posts: 1,670	These guys are right on! You will need the extensions.

03-12-2013, 10:43 AM	#7
Dznts Anabolic Connoisseur Drives: Sold - Blown Camaro 2SS/RS LS3 Join Date: Sep 2010 Location: Oklahoma Posts: 22,094	i would like to know where to even get these headers. Texas Speed shows them out of stock till mid april. __________________

03-12-2013, 11:18 AM	#8
ForgedReality Envy Drives: 2011 SGM 2SS/RS - Black hood/hockey Join Date: Aug 2011 Location: Renton, WA Posts: 915 View My Garage	I bought them, and they're effing SWEET. Mine came with the extensions, but I think I ordered them along with the headers. I don't really remember. XD They have steel tags with the Texas Speed & Performance logo on them, tig welded at the corners. I dremeled them off, and smoothed out the weld spots nice and clean. Then I had them ceramic coated satin black. So sexy. I haven't put them on yet because the weather has been shitty, but it's among my list of summer mods. Gonna do it in the driveway on jack stands. Pretty sure this isn't gonna be a problem but has anybody tried putting long tubes on in the driveway?

03-12-2013, 02:23 PM	#10
Denis Drives: 2010 SS Join Date: May 2012 Location: Yorktown Heights, NY Posts: 7,695 View My Garage	I used a lift to do mine. But it was super easy. You shouldn't have any problems. __________________

03-13-2013, 10:21 AM	#11
camaro actual Drives: 2010 Camaro 2SS/RS L99 Join Date: Sep 2012 Location: san antonio TX Posts: 154	I did mine in my garage on jack stands, completly doable. __________________ TSP 2'' headers W/ hi Flo cats, CAI intake w/ apex scoop and wash relocate kit, VMAX TB, RX catch can, PFADT sways, NOWEEDS