2010 Camaro SEMA Car by Montage Motoring and Defenderworx

[RetroDude]

Originally Posted by Defenderworx

For the time being we do not have any plans of that sort. But there have been many different people on here asking about many different types of items so I'm sure after the Camaro really takes off a few months down the road we will start to offer different products, but at the moment we're just sticking with what we have drawn up and hoping that this car will be as successful as everyone says! Sorry. =/

Not a problem Brian, I can wait! ...

[NightmareSS]

Originally Posted by Defenderworx

No hard feelings i understand what your saying, I would want to verify myself if I were you. All of our products are Stainless Steel with a Triple Chrome Reflective Finish. They will no rust AT ALL and if anything like that were to happen you could contact us and we will warranty the products for you completely hassle free.

sweet.....thats good business

[moto-camaro]

Originally Posted by NightmareSS

sweet.....thats good business

i'm hoping to order a camaro for 2012 if my devious masterplan goes well, with a promise like that, it's a decent chance that a chrome fuel door and the half-phantom grille are in my future
This is definitely my favorite thread to watch, D-worx is coming out with some good aftermarket parts, parts that are actually useable.

[Defenderworx]

Originally Posted by NightmareSS

sweet.....thats good business

Originally Posted by moto-camaro

i'm hoping to order a camaro for 2012 if my devious masterplan goes well, with a promise like that, it's a decent chance that a chrome fuel door and the half-phantom grille are in my future
This is definitely my favorite thread to watch, D-worx is coming out with some good aftermarket parts, parts that are actually useable.

Thanks guys I definetly appreciate the compliments.

[Defenderworx]

Originally Posted by fsuredneck

I appreciate it. I'm curious to see what they'd look like. If I may be picky, could you post some from the back seat like your looking specifically at the louvers, and also from the front seat over your right shoulder like you were trying to look out the corner window? Sorry to sound pushy with the bump, but I wasn't sure if you saw the original post. All yalls work looks great so far!

Sorry I had already taken the pictures and left work by the time you posted this comment so I didn't see it until right now. However i did get some pictures from the drivers side looking over your right shoulder, if you would like me to take some pictures from the back seat that wouldn't be a problem just let me know and I will.

The first picture is of me standing there with my hand visible through the rear window without the louver so you can see what its like normally. And the second two are of me standing with my hand visible thought the rear window with the louver so you can see the difference.

I hope they help and once again let me know if you want more taken, its not a problem.

[fsuredneck]

Originally Posted by Defenderworx

Sorry I had already taken the pictures and left work by the time you posted this comment so I didn't see it until right now. However i did get some pictures from the drivers side looking over your right shoulder, if you would like me to take some pictures from the back seat that wouldn't be a problem just let me know and I will.

The first picture is of me standing there with my hand visible through the rear window without the louver so you can see what its like normally. And the second two are of me standing with my hand visible thought the rear window with the louver so you can see the difference.

Dont worry about the other pics unless someone else requests them too. Thanks for the offer, though. Its not that big a deal. I think that its AWESOME that you can see through them quite easily (almost like tint). How much do yall think tint will affect the visibility to the louvers, like if it just makes it as much darker as the tint, or if it blocks all visibility through it? So far these jumped higher on my potential mod list.

[Jericho]

Before I forget, I used the side shot of your camaro in my journel to represent the type I'm getting because it was the only one I could find that looked good and wasn't really a V8. Also, love your work with the grills and think the louvers are cool. Especially since you can see through them from the inside.
Do you guy's do any type of hood fabrication work. I'm looking for a shop that can do some custome work for me but finding my options very very limited.

[Jericho]

Originally Posted by Defenderworx

You can go to http://cgi.ebay.com/ebaymotors/ws/eB...m=110395315382 and order the door online.

Can't go to ebay from Military network. Anybody else selling your stuff? Why can't I order what I need from you guy's? It'd help out a lot more.

[Jericho]

I just went to billet anything and they advertise the phantom at 295 but when you do the sale it comes out to 495. Que?????

[moto-camaro]

woahhhh they're clear??? that's wild!!
are they see-throught from the inside, and not from the outside?

[csg93]

im sorry but i think those wheels are pretty hideous on that car. Even if there was more chrome on them i just dont like the design of the wheel for that car. I do love the billet grills though! I'll probably order one for my aqua blue metallic ss

[Brokinarrow]

Originally Posted by Jericho

I just went to billet anything and they advertise the phantom at 295 but when you do the sale it comes out to 495. Que?????

The upper and lower grill ares old separately, so that may be where you are getting your price difference at, not sure.

[Defenderworx]

Originally Posted by Jericho

Before I forget, I used the side shot of your camaro in my journel to represent the type I'm getting because it was the only one I could find that looked good and wasn't really a V8. Also, love your work with the grills and think the louvers are cool. Especially since you can see through them from the inside.
Do you guy's do any type of hood fabrication work. I'm looking for a shop that can do some custome work for me but finding my options very very limited.

Cool I'm glad you used to picture and hopefully you will post some pictures of your car once you get it going, always like to see other mods. As for the hood fabrication work we really don't do any of that, sorry.

Originally Posted by Jericho

Can't go to ebay from Military network. Anybody else selling your stuff? Why can't I order what I need from you guy's? It'd help out a lot more.

All of our parts are built, but a lot of them are currently at General Motors being licensed which is what gives you guys our 4 year warranty. Currently the Fuel Doors and Door Sills are licensed but within about a week or two the Bowties and side louvers and side vent inserts will all be licensed and ready for purchase. And within about 3-4 weeks tops all of our products will be licensed and available for you guys. As for the e-bay store if that doesn't work you can go to www.camarocollection.com for our parts but it takes them longer to get up on the site than it does for Addicted Auto Accessories to get them up on their e-bay store.

Originally Posted by Jericho

I just went to billet anything and they advertise the phantom at 295 but when you do the sale it comes out to 495. Que?????

Billet Anything has the same price as us. If you click on the Grill to purchase it you have to select both upper and lower grill in the products option part. When you do this their half length phantom comes out to $295 for the upper and lower which is the same price as the ebay store, and their full length phantom comes out to $415 for both upper and lower which is the same price as the ebay store.

[Defenderworx]

Originally Posted by fsuredneck

Dont worry about the other pics unless someone else requests them too. Thanks for the offer, though. Its not that big a deal. I think that its AWESOME that you can see through them quite easily (almost like tint). How much do yall think tint will affect the visibility to the louvers, like if it just makes it as much darker as the tint, or if it blocks all visibility through it? So far these jumped higher on my potential mod list.

I'm not sure about your questions, do you mean if you tint your windows, and then add the louvers on top of the tint? If this is what you mean I think it might make it difficult to see out those windows. But if you are planning on tinting your windows as well as getting the louvers, you should just leave the corner windows untinted and put the louvers there, it will look just as good and be much easier to see out of.