Come On Spring Roto-fab and RX are in! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dashgalaxy · 04-01-2013, 09:29 PM

This is been a long winter for some of us folks in Southern Ontario. I picked her up last September just in time to finish the break in period just to put her away.

The Helmet and Mods arrived just two weeks ago and I had a blast modding these. About 2 hours on doing the both modifications.

She's all ready.

ROTO-FAB CAI minus STICKER

Name: 20130324_151842.jpg
Views: 422
Size: 149.7 KB

RX CATCH CAN

Name: 20130324_151755.jpg
Views: 498
Size: 127.3 KB

Washed and wishing for the TRACK (Opening Day April 6th!)

Name: 20130330_164047.jpg
Views: 490
Size: 152.0 KB

Name: 20130330_164022.jpg
Views: 484
Size: 246.0 KB

I am tired of watching her sleep!

Let's go Spring!

starhutch · 04-01-2013, 09:51 PM

Nice work! Congrats on getting the ride outside, getting ready myself to get the cover off!

Roto-fab 1 · 04-02-2013, 01:27 PM

It looks ready to wake up! Thanks for including Roto-fab products on your car.

Deke736 · 04-02-2013, 02:31 PM

Very nice! My Roto-Fab Intake is being delivered today! I cannot wait to get out to the track for some fun!

FAIRNOT LZ1 · 04-02-2013, 07:17 PM

Congratulations dashgalaxy!!

Love that color on the ZL1!

A friend just picked up a vert same color .... nice!

I just installed my Roto-Fab CAI and was looking close at your install ... you may want to check the ground wire ... it looks like it may be pinched under the housing

... hard to tell in the pic

Car looks great bud!

I added a pic of my install to show you where I Think they want you to run the wire ... it's not easy to see in my pic but the wire runs under the stud mount you are now using for the catch can and around the air box ... I put a small piece of split hose where the wire rubs the air box.
Hope this helps you

cvp33 · 04-02-2013, 07:52 PM

Love that color. Love the roto-fab blower noise more though. Enjoy!

JDP Sales · 04-02-2013, 07:58 PM

Looks sweet! I love seeing all these cars coming out of hibernation!

Best regards,

Tyler
888-308-6007

OVERPAR73 · 04-02-2013, 08:59 PM

I would suggest removing the ground stud on the side and move the ground wire to the frame right below where it comes off and slightly forward there is a hole already threaded, ready to go. I have the whole package with the Roto-Fab, Big Gulp and w/w relocation tank. Everything looks top notch! Love that blower whine!!

Dashgalaxy · 04-02-2013, 10:55 PM

Thanks for the feedback on the ground. I did a 5 min adjustment and the wire is safely running around the box. Not going to move the post at this time as everything seems just right at this point. I used that split hose on the ground and air box as well. Thanks for the help!

Nice weather on Thursday for some driving!

ZEDL1 · 04-03-2013, 12:47 AM

Dashgalaxy, I love the lack of a front plate here in ON. I'm going to do the same when mine comes out in May.
Gorgeous colour! Nice CAI install work and tips. Thanks for that.

04-01-2013, 09:29 PM	#1
Dashgalaxy DashGalaxy Drives: Inferno Orange 2013 ZL1 Join Date: Jun 2009 Location: Hamilton, Ontario Canada Posts: 16	Come On Spring Roto-fab and RX are in! This is been a long winter for some of us folks in Southern Ontario. I picked her up last September just in time to finish the break in period just to put her away. The Helmet and Mods arrived just two weeks ago and I had a blast modding these. About 2 hours on doing the both modifications. She's all ready. ROTO-FAB CAI minus STICKER RX CATCH CAN Washed and wishing for the TRACK (Opening Day April 6th!) I am tired of watching her sleep! Let's go Spring! __________________ Last edited by Dashgalaxy; 04-01-2013 at 09:41 PM.

04-02-2013, 02:31 PM	#4
Deke736 COTW 12/3/12 Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011 Location: Glen Carbon, IL Posts: 3,279	Very nice! My Roto-Fab Intake is being delivered today! I cannot wait to get out to the track for some fun! __________________

04-02-2013, 07:17 PM	#5
FAIRNOT LZ1 It's in black & white Drives: 2012 ZL1 Summit White #1366 Join Date: Jul 2012 Location: Vernon CT Posts: 1,855 View My Garage	Congratulations dashgalaxy!! Love that color on the ZL1! A friend just picked up a vert same color .... nice! I just installed my Roto-Fab CAI and was looking close at your install ... you may want to check the ground wire ... it looks like it may be pinched under the housing ... hard to tell in the pic Car looks great bud! I added a pic of my install to show you where I Think they want you to run the wire ... it's not easy to see in my pic but the wire runs under the stud mount you are now using for the catch can and around the air box ... I put a small piece of split hose where the wire rubs the air box. Hope this helps you Attached Images __________________ FAIRNOT ZL1 Last edited by FAIRNOT LZ1; 04-02-2013 at 07:33 PM.

04-02-2013, 08:59 PM	#8
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,472 View My Garage	I would suggest removing the ground stud on the side and move the ground wire to the frame right below where it comes off and slightly forward there is a hole already threaded, ready to go. I have the whole package with the Roto-Fab, Big Gulp and w/w relocation tank. Everything looks top notch! Love that blower whine!! __________________ Build Thread: 2018 ZL1 Vert Purchased (Overpar73)

04-02-2013, 10:55 PM	#9
Dashgalaxy DashGalaxy Drives: Inferno Orange 2013 ZL1 Join Date: Jun 2009 Location: Hamilton, Ontario Canada Posts: 16	Thanks for the feedback on the ground. I did a 5 min adjustment and the wire is safely running around the box. Not going to move the post at this time as everything seems just right at this point. I used that split hose on the ground and air box as well. Thanks for the help! Nice weather on Thursday for some driving! __________________

04-01-2013, 09:51 PM	#2
starhutch THE RED ROCKER Drives: 2013 ZL1 VR Join Date: Feb 2012 Location: Kansas City, MO Posts: 146	Nice work! Congrats on getting the ride outside, getting ready myself to get the cover off!

04-02-2013, 01:27 PM	#3
Roto-fab 1 Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009 Location: Arizona Posts: 2,682	It looks ready to wake up! Thanks for including Roto-fab products on your car.

04-02-2013, 07:52 PM	#6
cvp33 America FVCK Yeah! Drives: 2024 Z06 Join Date: Mar 2013 Location: Salisbury, NC Posts: 1,405	Love that color. Love the roto-fab blower noise more though. Enjoy!

04-02-2013, 07:58 PM	#7
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	Looks sweet! I love seeing all these cars coming out of hibernation! Best regards, Tyler 888-308-6007

04-03-2013, 12:47 AM	#10
ZEDL1 Drives: 2013 ZL1 Triple Black, 2015 2LT/RS Join Date: Apr 2012 Location: Plymouth, Indiana Posts: 491	Dashgalaxy, I love the lack of a front plate here in ON. I'm going to do the same when mine comes out in May. Gorgeous colour! Nice CAI install work and tips. Thanks for that.