Fesler Moss 2010 Camaro Competition Package debut - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Corvin · 07-01-2009, 07:26 AM

I find it funny that none of the stuff they add to the car is their own, they brand their name into everyone else's stuff and call it theirs, you could do all of these things to your car yourself for the cost of the parts only and save yourself alot of $$$.

the_saint · 07-01-2009, 07:59 AM

imo that design lacks innovation. there is no wow factor. lets get twin turbos, engine swap, bored out block, something different; think outside the box. a new carbon or fiberglass hood, rear or front bumper. something to set u apart from everyone else. those rims should be 19 or 20 inch in order to fit fat tires and lower the car down some more.

Edrock · 07-01-2009, 09:26 AM

Wheels =

Car as a whole = Meh...

tjbusa · 07-01-2009, 09:30 AM

Quote:

Originally Posted by Andro

For 150k I'll take a ZR1 instead

And have over 30,000 for gas and insurance

2010 2-Tone · 07-01-2009, 10:01 AM

I think it's BS. Nothing special or different!!! Do something with the front or rear bumpers, different hood, grill, motor swap, PAINT!!!! If you are going to put a charger then put some wider tires on. Fill the backend up with tire. Way to plain!!!! Do a better job planning.

This is suppose to be something special. This car should jump out at you and it just doesn't!!! For the price range of $50,000 to $150,000 you should be getting something a whole lot better! But hey, what do I know!!!!

GatorBlue371 · 07-01-2009, 11:53 AM

How do you guys get enough Camaro's from GM to supply your orders if pre-orders havent even been filled yet?

Scrapppy666 · 07-01-2009, 12:08 PM

meh.... right idea going with a traditional 5 spoke wheel but such a horrible pick... It's pretty bad when 22's look like 19's on a lowered car. I agree that maybe reversing the colors would help... but still hate the spoke design...blah

Info@PeddersUSA.com · 07-01-2009, 02:08 PM

Quote:

Originally Posted by GatorBlue371

How do you guys get enough Camaro's from GM to supply your orders if pre-orders havent even been filled yet?

Our normal shipping processes require a big boat ride!. Now we have a lot of custom vehicles and GM vehicles that need the stuff right now. They agreed to pay the $350 or so shipping charges. This offer is also available to anyone who wants them now. It still normally takes 7-9 days due to customs and such.

Hope this answers your question

mike
dms

Bell040 · 07-01-2009, 02:17 PM

I want that tailight trim and the bowties !!!

where do I get them?

or are they just sprayed with a lens darkener?

RPO_Z28 · 07-01-2009, 02:17 PM

$150,000?

Dealers are getting slammed for $5000 over MSRP.

What's up with that?

Bell040 · 07-01-2009, 02:19 PM

Quote:

Originally Posted by RPO_Z28

$150,000?

Dealers are getting slammed for $5000 over MSRP.

What's up with that?

dealers aren't adding to the car... they are only middlemen

....sorry RPO......

Revo1 · 07-01-2009, 03:00 PM

Quote:

Originally Posted by Boba Vette

OMG, that's the funniest thing I've read all day!

So, wheels... meh, not my flavor, but as for the rest of the aesthetic mods, am I missing something? What are they besides blacking out the bowtie and taillights? I can do that and a supercharger for A LOT less than $50k-$150k. And I'll be happy to sign a plate/the engine bay. I'm famous and have a sharpie!

LOL

vm1971 · 07-01-2009, 03:02 PM

Quote:

Originally Posted by csg93

It looks pretty good. The wheels aren't amazing but they definently dont look bad either

aggreed about the wheels. im sorry but i like a more chunky rim and tire... but yea... its NOT awful, that fer sure! the rest is vicious.

TaylorRyanSS · 07-01-2009, 03:04 PM

rims

the spokes should be black and the lip should be chrome or aluminum

07-01-2009, 07:26 AM	#43
Corvin Drives: Soon to have a 2SS 2010 Camaro Join Date: Oct 2008 Location: Waukegan, IL Posts: 53	I find it funny that none of the stuff they add to the car is their own, they brand their name into everyone else's stuff and call it theirs, you could do all of these things to your car yourself for the cost of the parts only and save yourself alot of $$$. __________________ So I said.. "I want you to Twitter my Yahoo until I Google all over your Facebook" 2SS/RS - SIM M6 Order# NKNBS6 Reordered on 6/9/09 2G1FT1EW0A9134351 Born on date = 8/10/09 1100, Preliminary order accepted 6/9/09 3000, Order accepted by production control6/27/09 3100, Order available to sequence7/20/09 3300, Order scheduled for production7/20/09 TPW 8/03/09 3400, Order broadcast08/07/09 3800, Order produced08/10/09 2G1FT1EW0A9134351 4000, Available to ship08/11/09 4200, Shipped08/11/09 5000, Delivered to the dealer08/18/09 6000, Delivered to the customer08/18/09

07-01-2009, 07:59 AM	#44
the_saint Member Drives: rusty Join Date: May 2008 Location: bucket Posts: 74	imo that design lacks innovation. there is no wow factor. lets get twin turbos, engine swap, bored out block, something different; think outside the box. a new carbon or fiberglass hood, rear or front bumper. something to set u apart from everyone else. those rims should be 19 or 20 inch in order to fit fat tires and lower the car down some more. __________________

07-01-2009, 09:26 AM	#45
Edrock Drives: '10 Camaro 2SS LS3 Join Date: Jan 2009 Location: Jamestown, NC Posts: 964 View My Garage	Wheels = Car as a whole = Meh... __________________ DT Shorties, Solo hi-flow Cats, X-pipe, resonator delete, Flowmaster Super-44s, VMAX TB, Stronger MAF, C.A.I. Intake with race scoop, and JRE Tune! WOT is my happy place!!

07-01-2009, 11:53 AM	#48
GatorBlue371 Drives: vrooooom vrooooom Join Date: Dec 2008 Location: Florida Posts: 1,375	How do you guys get enough Camaro's from GM to supply your orders if pre-orders havent even been filled yet? __________________ "With a light touch on the brakes, run the revs up a bit. Slip off the brake and bury the throttle. There's a light chirp as tires scratch for bite. Then comes a sub-5.0-second sled ride to 60 mph. A tick over 13.0 sec. and you're through the quarter-mile. It's a rush, of course, but not overly dramatic. Try the same thing with this pair's predecessors of 1970 or so and you'll find yourself in a bit of a wrestling match. Ain't progress wonderful? Maybe yes, and maybe sometimes it's fun to wrestle."

07-01-2009, 02:17 PM	#51
Bell040 Drives: 2SS/RS - Black - GFX Join Date: Nov 2008 Location: B'ham, Alabama Posts: 2,458 View My Garage	I want that tailight trim and the bowties !!! where do I get them? or are they just sprayed with a lens darkener? __________________ Ordered: 10-13-08 Built: 3-30-09 (#1691) Recieved: 6-12-09 Blacked out, Cammed (Lunati Voodoo 233/245, .578/.598 @114°, +4°), ARH LTs, VR OTR CAI, Cutouts, and lots of other fun mods.

07-01-2009, 10:01 AM	#47
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,220 View My Garage	I think it's BS. Nothing special or different!!! Do something with the front or rear bumpers, different hood, grill, motor swap, PAINT!!!! If you are going to put a charger then put some wider tires on. Fill the backend up with tire. Way to plain!!!! Do a better job planning. This is suppose to be something special. This car should jump out at you and it just doesn't!!! For the price range of $50,000 to $150,000 you should be getting something a whole lot better! But hey, what do I know!!!!

07-01-2009, 12:08 PM	#49
Scrapppy666 Drives: 2010 2SS/RS M6 Black/Black Join Date: Apr 2009 Location: Pittsburgh, PA Posts: 1,281 View My Garage	meh.... right idea going with a traditional 5 spoke wheel but such a horrible pick... It's pretty bad when 22's look like 19's on a lowered car. I agree that maybe reversing the colors would help... but still hate the spoke design...blah

07-01-2009, 02:17 PM	#52
RPO_Z28 Drives: 2007 C6Z Join Date: Jan 2009 Location: RVC, New York Posts: 1,742	$150,000? Dealers are getting slammed for $5000 over MSRP. What's up with that? __________________

07-01-2009, 03:04 PM	#56
TaylorRyanSS COTW: 12/13/10 Drives: 1969 Camaro Join Date: Feb 2008 Location: Orange County, CA Posts: 7,880	rims the spokes should be black and the lip should be chrome or aluminum __________________ "Are you one of those boys who prefer cars to women? - I'm one of those boys that appreciates a fine body, regardless of the make." 1969 CAMARO JOURNAL: http://www.camaro5.com/forums/showthread.php?t=341239 \| FACEBOOK: http://www.facebook.com/taylor.ryan.apt \| GRAPHIC DESIGN: www.aptdesigns.net

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
Think about this and the Z28 5th gen	13F20	Camaro ZL1 Forum - ZL1 Specific Topics	41	09-04-2010 01:59 AM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 08:05 PM
Hennessey 2010 Chevrolet Camaro 705-HP!! (HPE700)	Caliman93230	5th Gen Camaro SS LS LT General Discussions	172	04-01-2009 07:12 PM
2010 Mercedes-Benz SLR McLaren Stirling Moss Edition	TFord	General Automotive + Other Cars Discussion	11	01-20-2009 12:11 AM