Iowa Members Get In Here! - Page 399 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

OVERPAR73 · 04-18-2013, 03:47 PM

Lets get a dyno day as soon as it's nice!

xtreme2s · 04-18-2013, 04:07 PM

Quote:

Originally Posted by OVERPAR73

Lets get a dyno day as soon as it's nice!

Count me in..... in fact I'm wanting to bring 2 cars

Tim S

xtreme2s · 04-18-2013, 05:47 PM

Quote:

Originally Posted by HRD_WRK

Well –the rain isn’t going to take my fun away, sooooo:

My Diff break in is not going to be completed as much as desired. I am not driving in the mess for the next couple of days to spend a week cleaning, not even getting into many areas. So with the builder’s approval due to less stress, I am going to run Autox this weekend instead. I missed the last one because the car was torn apart-desire to see what how the 95% completed suspension works out.

If anyone’s interested, shoot me a PM or call my cell.

Me too. I will drive in rain, but we have some streets that flooded, and left it very muddy from all the rain after water drained away.

Where is this weekend's auto-x?

I signed up to do the Adam's detail clinic at the Lingenfelter Collection's Open house, but maybe doing a drive in a fiqure 8 be fun

rberns · 04-18-2013, 10:29 PM

Want to welcome Carly from Marion to the Iowa section.

Carly · 04-18-2013, 10:42 PM

Looking forward to a fun summer with my Camaro. I've had her since October and have barely got to drive it. This rain needs to go away, for now the Camaro stays in the garage

Redmaro · 04-18-2013, 11:05 PM

Quote:

Originally Posted by Carly

Looking forward to a fun summer with my Camaro. I've had her since October and have barely got to drive it. This rain needs to go away, for now the Camaro stays in the garage

Carly, welcome to the Iowa section of the camaro5 group. It's nice to have another Victory Red Camaro in the group.
Bob

its a syn · 04-19-2013, 01:06 AM

Welcome Carly! It snowed all the way to Fremont NE tonite, so sick of this winter not giving up

rberns · 04-19-2013, 04:11 AM

Well, if it doesn't rain/snow on Friday and I get some home repairs fini...started I think I might take the car out for a spin. Anyone else?

renyart · 04-19-2013, 07:25 AM

Welcome Carly!!!

BenningJ · 04-19-2013, 09:11 AM

Quote:

Originally Posted by renyart

Welcome Carly!!!

Rick, do you have tint? If so, what percentage did you use?

krusher · 04-19-2013, 10:41 AM

Here is an update on what I got so far done to my car this winter and spring. I have a few organizing and painting projects, 6 piston brembos, and finally a strut brace to put on and I should be ready to show her off.

Before:

After

BenningJ · 04-19-2013, 11:16 AM

Looks good Krusher! Is that the Holley Fuel Rail kit? Where did you move your coil to?

krusher · 04-19-2013, 11:40 AM

Moved the coils to the car frame right below the PCU and in front of alternator. I got the rails from someone on the marketplace. They were supposed to be for a FAST intake, but I got shorter bolts so they work with the stock manifold.

I also have some stepped headers sitting in my living room floor! Gonna get them on this weekend.

Vitoman · 04-19-2013, 11:50 AM

man that Hydrographic print looks awesome!

04-18-2013, 03:47 PM	#5573
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,472 View My Garage	Lets get a dyno day as soon as it's nice! __________________ Build Thread: 2018 ZL1 Vert Purchased (Overpar73)

04-18-2013, 10:29 PM	#5576
rberns Drives: 2011 Camaro 2SS/RS Join Date: Apr 2011 Location: US Posts: 3,291 View My Garage	Want to welcome Carly from Marion to the Iowa section. __________________ 2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan, Holley fuel rail, Proform valve covers, relocated coil packs

04-19-2013, 01:06 AM	#5579
its a syn B.O.D. 02/16/10 Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010 Location: Albia,Iowa Posts: 3,959 View My Garage	Welcome Carly! It snowed all the way to Fremont NE tonite, so sick of this winter not giving up __________________

04-19-2013, 04:11 AM	#5580
rberns Drives: 2011 Camaro 2SS/RS Join Date: Apr 2011 Location: US Posts: 3,291 View My Garage	Well, if it doesn't rain/snow on Friday and I get some home repairs fini...started I think I might take the car out for a spin. Anyone else? __________________ 2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan, Holley fuel rail, Proform valve covers, relocated coil packs

04-19-2013, 07:25 AM	#5581
renyart Drives: 2013 ZL1 Convertible Join Date: May 2010 Location: Cedar Rapids Iowa Posts: 230 View My Garage	Welcome Welcome Carly!!! Attached Images

04-18-2013, 10:42 PM	#5577
Carly Drives: 2013 1LT RS Camaro Join Date: Dec 2012 Location: Iowa Posts: 34	Looking forward to a fun summer with my Camaro. I've had her since October and have barely got to drive it. This rain needs to go away, for now the Camaro stays in the garage

04-19-2013, 10:41 AM	#5583
krusher Drives: 2010 Camaro SS/RS CGM Join Date: Dec 2011 Location: Oskaloosa, IA Posts: 632	Here is an update on what I got so far done to my car this winter and spring. I have a few organizing and painting projects, 6 piston brembos, and finally a strut brace to put on and I should be ready to show her off. Before: After

04-19-2013, 11:16 AM	#5584
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	Looks good Krusher! Is that the Holley Fuel Rail kit? Where did you move your coil to? __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

04-19-2013, 11:40 AM	#5585
krusher Drives: 2010 Camaro SS/RS CGM Join Date: Dec 2011 Location: Oskaloosa, IA Posts: 632	Moved the coils to the car frame right below the PCU and in front of alternator. I got the rails from someone on the marketplace. They were supposed to be for a FAST intake, but I got shorter bolts so they work with the stock manifold. I also have some stepped headers sitting in my living room floor! Gonna get them on this weekend.

04-19-2013, 11:50 AM	#5586
Vitoman Drives: Slow car Join Date: Apr 2013 Location: Des Moines, Iowa Posts: 22	man that Hydrographic print looks awesome!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Properautocare Coupon Sale for Camaro5 Members	Angelo@Autopia	Wash/Wax/Detailing and Cosmetic Maintenance Parts	2	12-11-2009 10:38 AM
STS Turbo - Exclusive Offer for Camaro 5 Members - Ends Oct 10th!!!	ZZcamaro	Forced Induction	64	10-19-2009 01:16 PM
Messages to more than 5 members & Social Groups	heinzd01	Site Related Announcements / Suggestions / Feedback / Questions	5	09-16-2009 09:22 AM