Northstar - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Capt_Pooty · 04-25-2013, 11:12 AM

See you guys tonight !

rforbes · 04-25-2013, 12:33 PM

Ok Captain!
Friday are just regular Fun & Grudge. Cost a little more than the throw down but you do not have to wake up early.

sasquash1984 · 04-26-2013, 12:52 AM

Had fun seeing everything and all the fast camaros running 8.1 down to 6.9 tonight

NorthTex45thSS · 04-26-2013, 07:53 AM

Yea that was fun! Made my fastest pass yet! And also got to see some nice cars!

rforbes · 04-26-2013, 08:24 AM

Quote:

Originally Posted by NorthTex45thSS

Yea that was fun! Made my fastest pass yet! And also got to see some nice cars!

Good going!

Great night for racing!

Capt_Pooty · 04-26-2013, 10:40 AM

Had a great night last night. Nice to put faces to Screen Names ! Some Fast consistent cars last night !

rforbes · 04-29-2013, 01:53 PM

Ok, so what is the agenda for this weekend??
We have fun & Grudge at Northstar on Friday night. We have the Super Chevy show on Saturday, and we have the Texas Muscle Car club challenge on Sunday. I am a member of the GM performance team and they are looking for some 5th gen Camaros to run with on the TMCC events. It does not cost anything to be a member just come on out.

So who wants to do what??

sasquash1984 · 04-29-2013, 02:16 PM

Tmcc is that like last years where we bracket race

rforbes · 04-29-2013, 02:24 PM

Yep, sure is. As consistent as you are, you should do well in it!

caverman · 04-29-2013, 06:40 PM

I'm thinking about going out on Friday night. I would like to run the '10 while it's still cool at night. We will probably take one of our '67 to test out a new motor. If that goes well then will possibly run the '67 in the TMCC on Sunday.

rforbes · 04-30-2013, 11:20 AM

Quote:

Originally Posted by caverman

I'm thinking about going out on Friday night. I would like to run the '10 while it's still cool at night. We will probably take one of our '67 to test out a new motor. If that goes well then will possibly run the '67 in the TMCC on Sunday.

I think I have decided to do the same. (Go on Friday), I have some kinks to work out and Saturday is going to be busy. Then Hopefully I will be good for Sunday.

NorthTex45thSS · 05-01-2013, 02:14 PM

Is this guy invited?

and did someone say bracket race??

rforbes · 05-01-2013, 03:30 PM

Quote:

Originally Posted by NorthTex45thSS

Is this guy invited?

and did someone say bracket race??

Come on out! The more the merrier and it will be fun.

sasquash1984 · 05-02-2013, 12:55 PM

I'll be there Sunday but not Friday

04-25-2013, 11:12 AM	#15
Capt_Pooty Slow Race Vert Drives: 2011 2LT Vert Join Date: Feb 2012 Location: Benbrook TX Posts: 863	See you guys tonight ! __________________

04-26-2013, 12:52 AM	#17
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	Had fun seeing everything and all the fast camaros running 8.1 down to 6.9 tonight __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

04-26-2013, 07:53 AM	#18
NorthTex45thSS Drives: 2012 45th SS Join Date: Jul 2012 Location: DFW, Tx Posts: 144 View My Garage	Yea that was fun! Made my fastest pass yet! And also got to see some nice cars! __________________ 2012 45th RS/SS ADM Perfomance intake, ADM tuned, Stainless Works headers/no cats, 3" magnaflow comp exhaust, 160º thermostat, Nitto NT05R's, 387rwhp/396tq 95 Kenworth W900L powered by CAT 13 spd

04-26-2013, 10:40 AM	#20
Capt_Pooty Slow Race Vert Drives: 2011 2LT Vert Join Date: Feb 2012 Location: Benbrook TX Posts: 863	Had a great night last night. Nice to put faces to Screen Names ! Some Fast consistent cars last night ! __________________

04-29-2013, 02:16 PM	#22
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	Tmcc is that like last years where we bracket race __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

04-25-2013, 12:33 PM	#16
rforbes Drives: IOM SS/RS Join Date: Mar 2009 Location: The Colony, Texas Posts: 797 View My Garage	Ok Captain! Friday are just regular Fun & Grudge. Cost a little more than the throw down but you do not have to wake up early.

04-29-2013, 01:53 PM	#21
rforbes Drives: IOM SS/RS Join Date: Mar 2009 Location: The Colony, Texas Posts: 797 View My Garage	Ok, so what is the agenda for this weekend?? We have fun & Grudge at Northstar on Friday night. We have the Super Chevy show on Saturday, and we have the Texas Muscle Car club challenge on Sunday. I am a member of the GM performance team and they are looking for some 5th gen Camaros to run with on the TMCC events. It does not cost anything to be a member just come on out. So who wants to do what??

04-29-2013, 02:24 PM	#23
rforbes Drives: IOM SS/RS Join Date: Mar 2009 Location: The Colony, Texas Posts: 797 View My Garage	Yep, sure is. As consistent as you are, you should do well in it!

04-29-2013, 06:40 PM	#24
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	I'm thinking about going out on Friday night. I would like to run the '10 while it's still cool at night. We will probably take one of our '67 to test out a new motor. If that goes well then will possibly run the '67 in the TMCC on Sunday. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

05-01-2013, 02:14 PM	#26
NorthTex45thSS Drives: 2012 45th SS Join Date: Jul 2012 Location: DFW, Tx Posts: 144 View My Garage	Is this guy invited? and did someone say bracket race?? __________________ 2012 45th RS/SS ADM Perfomance intake, ADM tuned, Stainless Works headers/no cats, 3" magnaflow comp exhaust, 160º thermostat, Nitto NT05R's, 387rwhp/396tq 95 Kenworth W900L powered by CAT 13 spd

05-02-2013, 12:55 PM	#28
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	I'll be there Sunday but not Friday __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's