You are browsing camaro5 
 |
|
04-27-2013, 08:16 PM
|
#1 |
 
Drives: 2012 Camaro 2SS Join Date: Apr 2013
Location: NEW MEXICO
Posts: 7
|
Front inner tie rods..
Alright well here recently while making tight turns at slow speeds a clanking/clicking sound could be herd from the left front wheel well. So i ignored it till yesterday i got in my car and it was more prominent of a sound and didn't matter what speed i was at if i turned it clicked. Got it up on a lift today and apparently the inner tie rod is bad....Kind of astonished here, I only have 15k miles on the car. So is this like a fluke? Or has this happened to anyone else? Also i could not find an aftermarket stronger/better one than that which GM offers...dose anyone know of one that might work?
__________________
Vroom Vroom....
|
|
|
|
04-27-2013, 09:47 PM
|
#2 |
    
|
Take it to the dealer, you should still be under warranty. I had both inner tie-rods bad on my truck at 15k miles too. Got 105k now and no problems. It happens. Let the dealer worry about it.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
 |
|
|
|
|
04-27-2013, 09:53 PM
|
#3 |
|
Drives: 2012 Camaro 2SS Join Date: Apr 2013
Location: NEW MEXICO
Posts: 7
|
I just don't want it to be a reoccurring thing, i tend to ride my car hard
__________________
Vroom Vroom....
|
|
|
|
|
04-28-2013, 07:42 AM
|
#4 |
|
|
Shouldn't be a reoccurring problem, but be prepaired if your hard on equipment.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
|
|
|
|
|
|
|
 |
|
|
