Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Regional Forums > USA - Texas > Local Marketplace


Reply
 
Thread Tools
Old 04-11-2013, 10:51 PM   #1
nightmarechevy
 
nightmarechevy's Avatar
 
Drives: 10 2SS/RS M6
Join Date: Mar 2012
Location: San Angelo, TX
Posts: 296
22" Asanti AF144 wheels and tires with tpms (OFFERS or TRADES?)

(Copied from my craigslist ad)

I have a set of complete 22" Asanti AF144 wheels and tires with everything needed to install on most 5x120mm bolt pattern vehicles. These were pulled from my 2010 Camaro SS and were custom fitted from the manufacturer to clear the SS Brembo brake calipers. They will most likely fit most BMWs, new GTO, and any other vehicle with 5x120 bolt spacing as long as the offset works. These are listed as 0mm offset because they were designed for the Camaro so I am unsure exactly what offset they have. The spokes clear the stock Brembo calipers by just a fraction of an inch so they look custom tailored but also fit the V6 Camaro perfectly. These are staggered fitment with 22x9" front wheels and 22x11" rear wheels with a 3.5" lip on front and a 5" lip in the rear. They are a 3 pc wheel so you can take them apart and powder coat each part to whatever color combination you wish if you do not like the chrome. The tires are Lexani (Nexen) HP Roadian tires (Asanti is made by Lexani) in 265/35/22 front and 295/30/22 rear. The tires are in great shape with little wear (even wear). To my knowledge the right rear tire has a patch but there have been no other repairs. I am also incuding the installed tire pressure monitors that communicate with all 2010+ Camaros and possibly other vehicles with 315 mhz monitors as well as a brand new set of Asanti tire pressure monitor adapter valve stems and used splined lug nuts. These wheels retail at $4800+ depending on the dealer so with tires and tire monitors this setup is well over $5k new. I am only selling because my wife wanted a different style 22" setup and is happier with the new wheels and tires. I am only looking for $2800 which is almost half price of a new setup and prefer cash but may take partial or even possibly full trade depending on what you have.

The bad:
*Right rear wheel is missing the special tpms valve stem adapter (NEW SET INCLUDED)
*Right front wheel had some minor curb rash but was professionally repaired. It is still noticable if you are looking for it but does not stand out to me.
*Finish is not 100% but there is no deep pitting or corrosion. The discoloration spots have all came out when polished so far but I have not had time to work on all 4 wheels. There are some minor surface scuffs that are hard to notice but should be removable with polishing.
*The rubber valve stems seem to leak when they are bent over by hand but have never leaked any air when on the car. These are a very cheap fix if you know someone with a tire machine that can break the bead down on the tire.

If interested shoot me an email or text at 325-two seven seven-6295.I also have a full factory exhaust from a 2010 Camaro SS, front and rear stock Brembo brake rotors and pads with 9k miles, factory Camaro grille shell, 2 factory front bowtie emblems (1 brand new, 1 used), and a brand new front bowtie mounting bracket for a heritage grille. Will sell any of these parts or throw them in with the wheels and tires if sold together.
__________________
2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, Street Slayer twin carbon, Tick stainless line and remote bleeder, GTO reservoir, 20" Verde Axis V99, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes

Last edited by nightmarechevy; 04-14-2013 at 07:54 PM.
nightmarechevy is offline   Reply With Quote
Old 04-11-2013, 10:55 PM   #2
nightmarechevy
 
nightmarechevy's Avatar
 
Drives: 10 2SS/RS M6
Join Date: Mar 2012
Location: San Angelo, TX
Posts: 296




__________________
2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, Street Slayer twin carbon, Tick stainless line and remote bleeder, GTO reservoir, 20" Verde Axis V99, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes
nightmarechevy is offline   Reply With Quote
Old 04-14-2013, 03:12 PM   #3
nightmarechevy
 
nightmarechevy's Avatar
 
Drives: 10 2SS/RS M6
Join Date: Mar 2012
Location: San Angelo, TX
Posts: 296
Any trade offers? Interested in exterior accessories and maybe performance parts depending on what you have. Will do a partial trade plus cash or possibly an even trade for the right offer.
__________________
2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, Street Slayer twin carbon, Tick stainless line and remote bleeder, GTO reservoir, 20" Verde Axis V99, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes
nightmarechevy is offline   Reply With Quote
Old 04-21-2013, 02:46 PM   #4
nightmarechevy
 
nightmarechevy's Avatar
 
Drives: 10 2SS/RS M6
Join Date: Mar 2012
Location: San Angelo, TX
Posts: 296
Bump. Any offers?
__________________
2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, Street Slayer twin carbon, Tick stainless line and remote bleeder, GTO reservoir, 20" Verde Axis V99, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes
nightmarechevy is offline   Reply With Quote
Old 05-11-2013, 10:38 AM   #5
nightmarechevy
 
nightmarechevy's Avatar
 
Drives: 10 2SS/RS M6
Join Date: Mar 2012
Location: San Angelo, TX
Posts: 296
Few pics on the dirty car. Ill try to snap a few out of the garage later.




__________________
2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, Street Slayer twin carbon, Tick stainless line and remote bleeder, GTO reservoir, 20" Verde Axis V99, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes
nightmarechevy is offline   Reply With Quote
Old 05-11-2013, 10:51 AM   #6
mister_goods1
Orange Thunder
 
mister_goods1's Avatar
 
Drives: 2010 Camaro 1SS IOM
Join Date: Aug 2009
Location: Agua Dulce, TX
Posts: 161
Nice rims....I was interested in where u got your rotors from? And did they work with the stock brembo calipers?
mister_goods1 is offline   Reply With Quote
Old 05-11-2013, 11:02 AM   #7
nightmarechevy
 
nightmarechevy's Avatar
 
Drives: 10 2SS/RS M6
Join Date: Mar 2012
Location: San Angelo, TX
Posts: 296
They are the R1 Concepts premium drilled/slotted rotors. I also got their ceramic pads to go with. They are a sponsor on here and several other sponsors sell them as well. I am very happy with them so far and there were no modifications required to install them.
__________________
2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, Street Slayer twin carbon, Tick stainless line and remote bleeder, GTO reservoir, 20" Verde Axis V99, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes
nightmarechevy is offline   Reply With Quote
Old 05-11-2013, 11:42 PM   #8
mister_goods1
Orange Thunder
 
mister_goods1's Avatar
 
Drives: 2010 Camaro 1SS IOM
Join Date: Aug 2009
Location: Agua Dulce, TX
Posts: 161
Sweet thanks man. Nice rims by the way, I have some lexani's on my ss, love them
mister_goods1 is offline   Reply With Quote
Old 05-11-2013, 11:58 PM   #9
nightmarechevy
 
nightmarechevy's Avatar
 
Drives: 10 2SS/RS M6
Join Date: Mar 2012
Location: San Angelo, TX
Posts: 296
No problem. I had to take the Forgestars off so she could drive the car for a few days while waiting for a tire so I put the Asantis back on. I had forgotten how good they look on the car. I may just have to leave them on for a week or two, lol.
__________________
2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, Street Slayer twin carbon, Tick stainless line and remote bleeder, GTO reservoir, 20" Verde Axis V99, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes
nightmarechevy is offline   Reply With Quote
Old 05-12-2013, 12:15 AM   #10
mister_goods1
Orange Thunder
 
mister_goods1's Avatar
 
Drives: 2010 Camaro 1SS IOM
Join Date: Aug 2009
Location: Agua Dulce, TX
Posts: 161
Lol, nothin wrong with that
mister_goods1 is offline   Reply With Quote
Old 05-28-2013, 10:39 AM   #11
nightmarechevy
 
nightmarechevy's Avatar
 
Drives: 10 2SS/RS M6
Join Date: Mar 2012
Location: San Angelo, TX
Posts: 296
Bump, back off the car, open to offers...
__________________
2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, Street Slayer twin carbon, Tick stainless line and remote bleeder, GTO reservoir, 20" Verde Axis V99, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes
nightmarechevy is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:15 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2026, vBulletin Solutions, Inc.