Stage 2 cam + American Racing + Corsa = 470 rwhp video! - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Scrapppy666 · 07-09-2009, 08:24 PM

NICE! Exhaust tone could be a little deeper but could be the video, sounds sick regardless...

NTGILTY...whats the 06' goat sound like??? looks like a nice list of mods

gunslinger · 07-09-2009, 08:46 PM

That thing sounds undrivable!

But it also sounds AWESOME!

How does the 2-piece dirveshaft hold up under the power?

Also, what RPMS did you run that thing and what kind of valve springs did you use?

ChucksTuning · 07-11-2009, 11:20 AM

Quote:

Originally Posted by gunslinger

That thing sounds undrivable!

But it also sounds AWESOME!

How does the 2-piece dirveshaft hold up under the power?

Also, what RPMS did you run that thing and what kind of valve springs did you use?

If it's anything like the GTO's driveshaft then it can handle a pretty good amount of power. But be practical too, if you're driving on the street, you don't really need to beef up much of the drivetrain on most applications. It's the track when you're running sticky tires and launching at high RPM's that things start to break.

Rev limiter is set at 7000, pulled it to about 6800 on the dyno. Cars running the PRC .675 lift dual valve springs.

Late Model Racecraft · 07-12-2009, 02:00 AM

Nice build chuckster!

ChucksTuning · 07-13-2009, 01:12 PM

Quote:

Originally Posted by Late Model Racecraft

Nice build chuckster!

Thanks buddy, give me a call when my tranny parts come in! I'm tired of not being able to race anybody. 3rd gear is kind of important!

CGM2SSRS · 07-13-2009, 02:26 PM

Quote:

Originally Posted by Doc

I can't believe you posted a video so we could hear what it sounds like, and then tromp all over the sound with that club beat song! You've got white noise frequencies in that beat song that clash and interfere with the engine sound. Any chance you can repost the video without the music track so we can hear the engine and exhaust?

hahahahaha....I agree that bass line is felonious! Or should be in a dyno video!

caverman · 07-15-2009, 10:05 AM

I had a friend give me a hard time about the new Camaro ad geared towards Gays. Of course his remark insinuated that the Camaro is for Gay people. I then promptly sent him a link to show him that this Camaro was definately NOT GAY!

However, I then got another bashing because the background music sounds like it came straingt from the Rainbow Room.

Please....re-do your video without any background music. We want to hear the Camaro without any invisionings of some guy dancing around a pole in the background.

ChucksTuning · 07-15-2009, 05:50 PM

Quote:

Originally Posted by caverman

I had a friend give me a hard time about the new Camaro ad geared towards Gays. Of course his remark insinuated that the Camaro is for Gay people. I then promptly sent him a link to show him that this Camaro was definately NOT GAY!

However, I then got another bashing because the background music sounds like it came straingt from the Rainbow Room.

Please....re-do your video without any background music. We want to hear the Camaro without any invisionings of some guy dancing around a pole in the background.

If I didn't have background music in the video, would I have your attention to the very end of where it's got all the information about the car? Silence during credits is kinda boring imo. And I thought put your hands up for detroit was a suiting song.

borabe6 · 07-17-2009, 05:48 AM

how much it cost ? for all things with out install

ChucksTuning · 07-18-2009, 02:04 PM

Quote:

Originally Posted by borabe6

how much it cost ? for all things with out install

Right around 4000 for all the parts. PM or email me and I'll send you a breakdown of the prices.

Chuck
chuckstuning@gmail.com
832-202-4115

07-09-2009, 08:46 PM	#30
gunslinger Drives: 1998 Z28 M6 Join Date: May 2008 Location: Lake Forest, CA Posts: 254	That thing sounds undrivable! But it also sounds AWESOME! How does the 2-piece dirveshaft hold up under the power? Also, what RPMS did you run that thing and what kind of valve springs did you use? __________________ GTR: Get Transmission Replaced

07-12-2009, 02:00 AM	#32
Late Model Racecraft Drives: 98 Camaro Race Car 3.96 @ 202 MPH Join Date: Mar 2009 Location: Houston, Tx Posts: 979 View My Garage	Nice build chuckster! __________________ FIRST C7 Corvette in the 7's & 9's 2019 ZR1 LT59.00@ 157 Current C7 World Record Holder 7.55@ 184MPH Quickest and Fastest GEN5 LT Powered Vehicle LMR1200HP Supercharged C7 8.84 @ 160** LMR1200HP Twin Turbo C7 9.35@155mph-2014 2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010 9.47 ZR1 Corvette-2009 FIRST 2010 CAMARO in the 9's-2010 713-466-9900 Latemodelracecraft.com

07-15-2009, 10:05 AM	#35
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	I had a friend give me a hard time about the new Camaro ad geared towards Gays. Of course his remark insinuated that the Camaro is for Gay people. I then promptly sent him a link to show him that this Camaro was definately NOT GAY! However, I then got another bashing because the background music sounds like it came straingt from the Rainbow Room. Please....re-do your video without any background music. We want to hear the Camaro without any invisionings of some guy dancing around a pole in the background. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

07-09-2009, 08:24 PM	#29
Scrapppy666 Drives: 2010 2SS/RS M6 Black/Black Join Date: Apr 2009 Location: Pittsburgh, PA Posts: 1,281 View My Garage	NICE! Exhaust tone could be a little deeper but could be the video, sounds sick regardless... NTGILTY...whats the 06' goat sound like??? looks like a nice list of mods

07-17-2009, 05:48 AM	#37
borabe6 Drives: camaro ss2 RS package Join Date: May 2009 Location: kuwait Posts: 14	how much it cost ? for all things with out install