Absolute paint fail on my part today *Pic* - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Nutro · 06-19-2013, 06:08 PM

I went to the Auto paint supply store today to have them throw the last 2oz of paint i had left into a spray can for me (They normally put 4oz) and didn't think it would work.

I cam home, prepped the intake cover, applied the adhesion promoter and started spraying. Ehhh it was WAY too thin. I got pissy and wiped most of it off. Then I saw the intake cover missing half of the green paint so I thought Hmmmm a partial "De-constructed" look.

Then I shook my head and walked away.

I will take it to an actual body shop tomorrow for proper painting.

upflying · 06-19-2013, 06:21 PM

I like the look, patina is popular today.

Ohten · 06-19-2013, 06:23 PM

I will take it to an actual body shop tomorrow for proper painting.

[/QUOTE]

Good idea

2Carats · 06-19-2013, 06:42 PM

June is not a good month for you is it?

Mind controlled by Cerebro

Nutro · 06-19-2013, 06:44 PM

Quote:

Originally Posted by 2Carats

June is not a good month for you is it?

Mind controlled by Cerebro

Dude, you aren't kidding!

AMERICANMADE · 06-19-2013, 06:52 PM

Quote:

Originally Posted by Nutro

Dude, you aren't kidding!

Take that intake cover and add a couple of those valve slapped pistons and create a "deconstructed" sculpture as a remembrance of this whole ordeal. Someday you can look at it and laugh about this whole week. Glad things are going to go your way!

upflying · 06-19-2013, 06:54 PM

Quote:

Originally Posted by AMERICANMADE

Take that intake cover and add a couple of those valve slapped pistons and create a "deconstructed" sculpture as a remembrance of this whole ordeal. Someday you can look at it and laugh about this whole week. Glad things are going to go your way!

That's a good idea, save the intake cover as a memorial to your dear departed engine. Hang it on the wall as a conversation starter.
Start over with a new intake cover.

Ohten · 06-19-2013, 06:57 PM

I was watching your other thread and good to see they are taking care of you.

Austin45 · 06-19-2013, 10:29 PM

If this is one of those piece they wrecked, I hope they're paying for it.

Da Mammer · 06-20-2013, 02:41 AM

The conversation piece is always a fun project, and adds a special mancave touch. Do what I did with all your blown motor parts..

SeriouslySinning · 06-20-2013, 08:45 AM

Gun... Gun... Real Weapon (Xbox cont) lol

Sales @ CAI Inc · 06-20-2013, 09:06 AM

Quote:

Originally Posted by Da Mammer

The conversation piece is always a fun project, and adds a special mancave touch. Do what I did with all your blown motor parts..

I see a pool noodle, COD for Xbox, guns, tannernite, and a motor table. I like this guys style, heaven knows what that pool noodle is used for!

TPAJETSKI · 06-20-2013, 09:24 AM

Stupid question I'm sure, but what does a table like that weigh?

AMERICANMADE · 06-20-2013, 05:01 PM

Quote:

Originally Posted by Da Mammer

The conversation piece is always a fun project, and adds a special mancave touch. Do what I did with all your blown motor parts..

That is the coolest side table I have ever seen! Car parts, game controller, semi autos, and a Chevy Camaro key fab. All you missed was a fat cigar and a bottle of Crown. Well done.

06-19-2013, 06:08 PM	#1
Nutro Drives: 2011 2SS Synergy Green Join Date: Nov 2011 Location: Austin, Texas Posts: 3,670	Absolute paint fail on my part today Pic I went to the Auto paint supply store today to have them throw the last 2oz of paint i had left into a spray can for me (They normally put 4oz) and didn't think it would work. I cam home, prepped the intake cover, applied the adhesion promoter and started spraying. Ehhh it was WAY too thin. I got pissy and wiped most of it off. Then I saw the intake cover missing half of the green paint so I thought Hmmmm a partial "De-constructed" look. Then I shook my head and walked away. I will take it to an actual body shop tomorrow for proper painting. __________________ L99 With a Maggie

06-19-2013, 06:23 PM	#3
Ohten Drives: Granite Crystal Challenger SRT Join Date: Jan 2010 Location: West Palm Beach,FL by way of Akron,OH Posts: 1,406 View My Garage	I will take it to an actual body shop tomorrow for proper painting. [/QUOTE] Good idea __________________

06-19-2013, 06:42 PM	#4
2Carats Drives: '12 Camaro 2SS/RS LS3 Join Date: Jun 2012 Location: Unknown Posts: 1,264 View My Garage	June is not a good month for you is it? Mind controlled by Cerebro __________________ I solve problems for a living. Either accept my advice or go figure it out on your own.

06-19-2013, 06:57 PM	#8
Ohten Drives: Granite Crystal Challenger SRT Join Date: Jan 2010 Location: West Palm Beach,FL by way of Akron,OH Posts: 1,406 View My Garage	I was watching your other thread and good to see they are taking care of you. __________________

06-19-2013, 10:29 PM	#9
Austin45 The Logistician Drives: 2012 LFX 45th Anniversary Join Date: Aug 2012 Location: Jonesboro, AR Posts: 864 View My Garage	If this is one of those piece they wrecked, I hope they're paying for it. __________________

06-19-2013, 06:21 PM	#2
upflying Drives: '86 Monte Carlo SS Join Date: Nov 2010 Location: Reno, NV Posts: 3,119	I like the look, patina is popular today.

06-20-2013, 02:41 AM	#10
Da Mammer Drives: 2010 camaro SS... shell... Join Date: Nov 2012 Location: Pennsyltucky Posts: 237	The conversation piece is always a fun project, and adds a special mancave touch. Do what I did with all your blown motor parts.. Attached Images __________________ tried LSXTC...now I'm LSXOD...

06-20-2013, 08:45 AM	#11
SeriouslySinning Drives: 2013 Chevy Camaro 2LT 3.6 V6 Join Date: Apr 2013 Location: United States Posts: 715 View My Garage	Gun... Gun... Real Weapon (Xbox cont) lol

06-20-2013, 09:24 AM	#13
TPAJETSKI Drives: Camaro Join Date: Apr 2012 Location: Florida Posts: 710	Stupid question I'm sure, but what does a table like that weigh?