New style catch can? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BAD ZL1 · 06-21-2013, 08:28 PM

That thing looks like its bulit like a billet shit house! Cant wait for mine to show up!

vetterm37 · 06-21-2013, 11:22 PM

i just mounted one of these . bracket fits perfectly, just need 1/4inch longer rad shroud bolt. used air craft fittings and black braided hose.can post picture if anybody wants..

The Stig · 06-21-2013, 11:28 PM

Quote:

Originally Posted by bumblebeecamaro

A few more pics.

What inside the filtering mechanism part?

Modern07 · 06-21-2013, 11:30 PM

That looks really nice! And if Jannetty say it works that's good enough for me!

Probably don't have to pay upfront and then wait 3 months for shipment either!

OldJedi · 06-21-2013, 11:37 PM

Quote:

Originally Posted by vetterm37

i just mounted one of these . bracket fits perfectly, just need 1/4inch longer rad shroud bolt. used air craft fittings and black braided hose.can post picture if anybody wants..

Well obviously:

OldJedi · 06-22-2013, 12:01 AM

Quote:

Originally Posted by JANNETTYRACING

The Can is a Proven Performer, we have also offered them for the Challenger and Mustang market for years.

Ted.

I went to the Moroso Website and they have the can available in both Silver and Black. Are the Black cans available for the ZL1?

trademaster · 06-22-2013, 12:24 AM

I have a moroso baffled can on my car and it is fantastic. They are a little pricey, but with great build quality and a design that works. I love the drain tube on the bottom, that's a nice touch.

midnighter · 06-22-2013, 12:31 AM

This looks good. Hands down better looking than the other ones I have seen.

Candr3535 · 06-22-2013, 12:37 AM

Catch can for zl1 from elite. Steve hooked me up with the right bracket for my car. Love it

hognutz · 06-22-2013, 01:12 AM

make sure you run a glass filter post can. In the lab tests I have seen the moroso was not a good as.

elite, RX, Mike norris, or bobs can were the best I have seen tested. the test was a lab test though so maybe on car it won't let anything pass.

the real trick is just put a glass filter in the system post can and if there is nothting there the can is doing the job. if not get a different can. It sole perpose on a car is to catch oil does not mater how cool it looks if it does not perfrom its only function.

To many get caught up on looks and brackets with catch cans. I don't get it personally but to each there own. I want the one that catches 99.9999% of all the oil.

my buddy put this one on his 5.0 but does not have a glass filter post can to really see how it is doing. I was not really blown away by the design myself. seems like vapor would pass by it but I could be wrong. some of the other cans have a design to prevent that better.

newagemuscle · 06-22-2013, 05:10 AM

Quote:

Originally Posted by JANNETTYRACING

The Can is a Proven Performer, we have also offered them for the Challenger and Mustang market for years.

Ted.

Ted,
Will this can work/fit an SS?

bumblebeecamaro · 06-22-2013, 06:45 AM

Quote:

Originally Posted by Modern07

That looks really nice! And if Jannetty say it works that's good enough for me!

Exactly

Quote:

Probably don't have to pay upfront and then wait 3 months for shipment either!

Amen to that. Ted always delivers what he promises. His business should be a business model that ALL businesses should follow. Be honest and truthful upfront and you won't have any upset customers.

bumblebeecamaro · 06-22-2013, 06:46 AM

Quote:

Originally Posted by The Stig

What inside the filtering mechanism part?

It looks like very fine steel wool.

joes407 · 06-22-2013, 08:03 AM

Quote:

Originally Posted by hognutz

make sure you run a glass filter post can. In the lab tests I have seen the moroso was not a good as.

elite, RX, Mike norris, or bobs can were the best I have seen tested. the test was a lab test though so maybe on car it won't let anything pass.

the real trick is just put a glass filter in the system post can and if there is nothting there the can is doing the job. if not get a different can. It sole perpose on a car is to catch oil does not mater how cool it looks if it does not perfrom its only function.

To many get caught up on looks and brackets with catch cans. I don't get it personally but to each there own. I want the one that catches 99.9999% of all the oil.

my buddy put this one on his 5.0 but does not have a glass filter post can to really see how it is doing. I was not really blown away by the design myself. seems like vapor would pass by it but I could be wrong. some of the other cans have a design to prevent that better.

im with you on this. that can doesn't have any condensating chamber or any check valves so i would imagine that under wot it has the capacity to suck the oil and oil smoke straight through it. it also attaches at the same radiator bolt that all the rx complainers were whining about. lastly the whole can has to be unscrewed to drain it which im sure is twice as messy if it catches enough oil to be near full. i chose functionality over style when i bought mine and after seeing so many dissected at the shop i know i made the right choice.

06-21-2013, 11:30 PM	#32
Modern07 Mid-Florida Camaro Club Drives: 2019 ZL1 on Order Join Date: Jan 2011 Location: Heathrow, FL Posts: 3,136	That looks really nice! And if Jannetty say it works that's good enough for me! Probably don't have to pay upfront and then wait 3 months for shipment either! __________________ My Build Thread

06-22-2013, 12:37 AM	#37
Candr3535 Drives: 2013 ZL1 Triple Black Vert M6 #5591 Join Date: May 2013 Location: Galloway,NJ Posts: 747 View My Garage	Catch can Catch can for zl1 from elite. Steve hooked me up with the right bracket for my car. Love it Attached Images

06-22-2013, 01:12 AM	#38
hognutz Drives: 2013 ZL1 Join Date: Oct 2011 Location: tangent or Posts: 2,985	make sure you run a glass filter post can. In the lab tests I have seen the moroso was not a good as. elite, RX, Mike norris, or bobs can were the best I have seen tested. the test was a lab test though so maybe on car it won't let anything pass. the real trick is just put a glass filter in the system post can and if there is nothting there the can is doing the job. if not get a different can. It sole perpose on a car is to catch oil does not mater how cool it looks if it does not perfrom its only function. To many get caught up on looks and brackets with catch cans. I don't get it personally but to each there own. I want the one that catches 99.9999% of all the oil. my buddy put this one on his 5.0 but does not have a glass filter post can to really see how it is doing. I was not really blown away by the design myself. seems like vapor would pass by it but I could be wrong. some of the other cans have a design to prevent that better. __________________ 2016 2SS 2020 super duty on 37's

06-21-2013, 08:28 PM	#29
BAD ZL1 BAD ZL1 Drives: 2013 VIN 48 Victory Red ZL1! Join Date: Jan 2012 Location: California Posts: 707	That thing looks like its bulit like a billet shit house! Cant wait for mine to show up!

06-21-2013, 11:22 PM	#30
vetterm37 Drives: 2013zl1&1972 vette:2010sierra Join Date: Mar 2013 Location: calgary Posts: 18	i just mounted one of these . bracket fits perfectly, just need 1/4inch longer rad shroud bolt. used air craft fittings and black braided hose.can post picture if anybody wants..

06-22-2013, 12:24 AM	#35
trademaster Drives: 12 MP4-12C, 16 Quattroporte Join Date: Mar 2012 Location: Working Posts: 707	I have a moroso baffled can on my car and it is fantastic. They are a little pricey, but with great build quality and a design that works. I love the drain tube on the bottom, that's a nice touch.

06-22-2013, 12:31 AM	#36
midnighter Account Suspended Drives: nothing Join Date: Nov 2010 Location: a hole Posts: 17,904	This looks good. Hands down better looking than the other ones I have seen.