CAMARO trunk lettering - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

byrosol · 05-16-2013, 07:15 PM

How did you cover up the hole in the back?

I thought when you remove the rear bowtie there are two holes in the trunk lid that held it on (At least there was for mine)

USMCSSGT-RET · 05-16-2013, 07:36 PM

Quote:

Originally Posted by byrosol

How did you cover up the hole in the back?

I thought when you remove the rear bowtie there are two holes in the trunk lid that held it on (At least there was for mine)

That's true only for production dates of May 2010 or earlier. Anything after that doesn't have alignment holes. Mine was built in May 2010 and had holes, but I had my body shop remove the bowtie and fill them in when they repainted my trunk under warranty.

ATL Muscle · 07-05-2013, 11:07 PM

Quote:

Originally Posted by USMCSSGT-RET

Just installed these, not sure how I feel about them. I had the rear bowtie shaved and other than these letters I just put on, there are no badges on the outside of the car at all.

I also put a set of letters on the dash....not sure how I feel about them either.

Comments are appreciated!!!!!

Where'd you get your letters from?

Aubrey64 · 07-05-2013, 11:17 PM

Looks good! I love your interior, great job!

USMCSSGT-RET · 07-06-2013, 12:22 AM

TooFaSS, they're the letters that were on the fenders.

Thanks Aubrey.

SummoneR · 07-06-2013, 03:24 AM

I think it looks great! with everyone de-chroming their cars it looks good to see some light accent of chrome again to match the wheels. I really like it.

USMCSSGT-RET · 07-06-2013, 08:52 AM

Thanks SummoneR. I'm a chrome type of guy. Not too much, less is more usually, but subtle and clean changes make the car stand out and look good.

Est.July.4.1776 · 07-06-2013, 10:19 AM

Whenever I see this done, it feels like it's paying homage to the 4th gen. It isn't something I'd do, but it's not a bad look for something different... maybe a little less spaced out, but nice ride

SummoneR · 07-07-2013, 12:25 PM

Quote:

Originally Posted by USMCSSGT-RET

Thanks SummoneR. I'm a chrome type of guy. Not too much, less is more usually, but subtle and clean changes make the car stand out and look good.

Same here. I like chrome as well, just not overdone. I really like chrome on wheels, the easiest to clean, and keep clean.

05-16-2013, 07:15 PM	#15
byrosol Thunderclap Drives: 2010 Camaro SS IBM (LS3) Join Date: Feb 2012 Location: California MD Posts: 186	How did you cover up the hole in the back? I thought when you remove the rear bowtie there are two holes in the trunk lid that held it on (At least there was for mine) __________________ MODS - Magnaflow Catback 16580 exhaust - K&N CAI - 20% tint - Spyder CCFL Halo Projector Headlights - Barton Pistol Grip Shifter - Bumblebee custom stripe kit

07-05-2013, 11:17 PM	#18
Aubrey64 Drives: 2010 Camaro LLT/RS Join Date: Apr 2012 Location: Plano, TX Posts: 2,684	Looks good! I love your interior, great job! __________________

07-06-2013, 12:22 AM	#19
USMCSSGT-RET Drives: '14 SIM 2LT/RS Vert Join Date: Aug 2010 Location: Concord, NC Posts: 1,412	TooFaSS, they're the letters that were on the fenders. Thanks Aubrey. __________________

07-06-2013, 03:24 AM	#20
SummoneR Paul Drives: '10 2SS/RS M6 "Marauder" Join Date: Mar 2009 Location: NOR*CAL Posts: 6,230	I think it looks great! with everyone de-chroming their cars it looks good to see some light accent of chrome again to match the wheels. I really like it. __________________

07-06-2013, 08:52 AM	#21
USMCSSGT-RET Drives: '14 SIM 2LT/RS Vert Join Date: Aug 2010 Location: Concord, NC Posts: 1,412	Thanks SummoneR. I'm a chrome type of guy. Not too much, less is more usually, but subtle and clean changes make the car stand out and look good. __________________

07-06-2013, 10:19 AM	#22
Est.July.4.1776 The pride of the CN Drives: '13 AGM 2SS/RS M6 & '70 Chevelle SS Join Date: May 2013 Location: Genesee County, Michigan Posts: 601	Whenever I see this done, it feels like it's paying homage to the 4th gen. It isn't something I'd do, but it's not a bad look for something different... maybe a little less spaced out, but nice ride __________________ "I've been working on the railroad, all mother f###ing day." ...and yeah, we hauled your Camaro. Class 1 Freight Rail Conductor - Master Mason - NRA Life Member - Tennessee Squire - Firefighter I & II Certified My other ride has 4,400+hp and corners like it's on rails... because it is.