You are browsing camaro5 
 |
|
07-26-2013, 11:14 AM
|
#1 |
 
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Frederick, MD
Posts: 76
|
18" Welds
I'm sure there is a thread like this but I cant seem to find it!
Anyway, I'm looking to get the 18X10.5 (Rear) and 18X7 (front) Weld RTS wheels for my Camaro. I need to get a little better traction on the track while still driving it here and there on the street. Its lowered with the eibach pro kit. Just curious if anybody else has this same setup and any offsets or special things I need to do so it doesn't rub anywhere? Thanks!
__________________
2010 Camaro 2SS/RS Black w/ Silver Rally Stripes, 21" Wheels, Painted Ground Effects, Whipple S/C, Stage 2 Blower Cam, 2400 Stall Converter, Roto Fab CAI, Borla Long Tube Headers W/ No Cats, Borla Catback Exhaust, ZL1 Fuel Pump w/ BAP, ZR1 MAP Sensor, ZR1 Spark Plugs, Line Lock, Tuned by Livernois, Eibach ProKit Lowering Springs 613 RWHP
|
|
|
|
07-26-2013, 12:39 PM
|
#2 |
          
|
Here, read through this thread....there's some good pictures if you scroll down a bit. As far as fitment, I would rely on the Weld Fitment Chart located on their website. They know what fits and what doesn't. Plus, if you have the wheels sizes/offsets that they recommend, you shouldn't have any problems with warranty issues or support down the road.
http://www.camaro5.com/forums/showthread.php?t=163338 |
|
|
|
|
07-27-2013, 07:35 AM
|
#3 |
|
Drives: 2010 Camaro 2SS/RS Join Date: Sep 2009
Location: Frederick, MD
Posts: 76
|
Thanks! :-)
__________________
2010 Camaro 2SS/RS Black w/ Silver Rally Stripes, 21" Wheels, Painted Ground Effects, Whipple S/C, Stage 2 Blower Cam, 2400 Stall Converter, Roto Fab CAI, Borla Long Tube Headers W/ No Cats, Borla Catback Exhaust, ZL1 Fuel Pump w/ BAP, ZR1 MAP Sensor, ZR1 Spark Plugs, Line Lock, Tuned by Livernois, Eibach ProKit Lowering Springs 613 RWHP
|
|
|
|
|
|
|
|
 |
|
|
