What Did You Do To Your Camaro Today? - Page 606 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

KJSolar · 08-25-2013, 04:50 PM

Painted shifting pattern on console.

RayTheRat · 08-26-2013, 01:55 AM

Got mine up in the air on jackstands so I can spray the underside with rattle can undercoating. Maybe I otta use Plasti-Dip. Seems to be the cure for everything else (including my speedo bezel, console, tail light bezels and anything else that'll stand still long enough to get a coat.

My car has a 50,000 mile corrosion warranty, but I don't know how that's possible with so much bare metal showing underneath. Maybe it's surface treated during assembly...but the salt flats is a cruel mutha. So it'll get as much undercoating as I can give it before I run it on the salt. I'm gonna pull the inner fenders out and make sure the area under them gets sprayed too...as soon as I find my impact wrench so I can pull the wheels.

Speakin of wheels, I think I'm gonna give 'em a coat of Duplicolor Clear, since I've heard that it doesn't yellow like some clear coats. Any input?

One last thing: Photos from Speed Week are on my server at: http://www.chevyasylum.com/lsr/bsf20...w/Welcome.html

SeriouslySinning · 08-26-2013, 09:01 AM

Quote:

Originally Posted by Silver85IrocZ

cleaned mine up yesterday and went to a car show today !

only pic i took at the show and its my car

981

Hands off ladies! lol

SeriouslySinning · 08-26-2013, 09:13 AM

BMR 1.2" Spring Install

!!!!

Wanted to plastidip the rims and paint the calipers but just didnt happen this weekend.

Meister · 08-26-2013, 01:25 PM

SeriouslySinning, how big of a deal was the lowering spring install? What "special" tools and equipment did you need? Thanks

JonnyGray · 08-26-2013, 02:11 PM

Plasti dipped hash marks on my AGM

SeriouslySinning · 08-26-2013, 02:37 PM

Quote:

Originally Posted by CamaroMike13

SeriouslySinning, how big of a deal was the lowering spring install? What "special" tools and equipment did you need? Thanks

We ended up buying an air powered impact wrench. This helps save alot of time but can be done without it. I rented a spring compressor from Pep Boys but didnt need it at all. Thats about it besides having the correct size wrenches for the job.

RoadieWingZ · 08-26-2013, 02:51 PM

Quote:

Originally Posted by SeriouslySinning

Hands off ladies! lol

Jeez, You must be kidding..... In my opinion they can put their hands wherever that want to!!

SeriouslySinning · 08-26-2013, 02:58 PM

LOL

CamaroLB · 08-26-2013, 03:00 PM

Finalized my engine cover !!

omgitsmikeyC · 08-26-2013, 03:02 PM

Oil change with Amsoil and w WIX filter. Awaiting delivery of my CAI and RX catchcan.

layzurguy · 08-26-2013, 05:09 PM

Twisted myself into the trunk to try and figure out how to remove the 3rd brake light. No success. Massage tomorrow to get the kinks out of my back now.

Lord Ryan · 08-26-2013, 06:50 PM

After market black bezels came in today.

Only noticeable difference is my bank account is $70 lighter.

tbis · 08-26-2013, 07:50 PM

Quote:

Originally Posted by Lord Ryan

After market black bezels came in today.

Only noticeable difference is my bank account is $70 lighter.

Do those just pull off?

Sent from my SCH-I535 using Tapatalk 2

08-25-2013, 04:50 PM	#8471
KJSolar Drives: 2018 SS 1LE Join Date: Jul 2013 Location: Kentucky Posts: 53	Painted shifting pattern on console. Attached Images

08-26-2013, 01:55 AM	#8472
RayTheRat Goofy old fart,salt racer Drives: 2010 Camaro 2SSRS: making progress! Join Date: Dec 2012 Location: The High Desert Posts: 127 View My Garage	Got mine up in the air on jackstands so I can spray the underside with rattle can undercoating. Maybe I otta use Plasti-Dip. Seems to be the cure for everything else (including my speedo bezel, console, tail light bezels and anything else that'll stand still long enough to get a coat. My car has a 50,000 mile corrosion warranty, but I don't know how that's possible with so much bare metal showing underneath. Maybe it's surface treated during assembly...but the salt flats is a cruel mutha. So it'll get as much undercoating as I can give it before I run it on the salt. I'm gonna pull the inner fenders out and make sure the area under them gets sprayed too...as soon as I find my impact wrench so I can pull the wheels. Speakin of wheels, I think I'm gonna give 'em a coat of Duplicolor Clear, since I've heard that it doesn't yellow like some clear coats. Any input? One last thing: Photos from Speed Week are on my server at: http://www.chevyasylum.com/lsr/bsf20...w/Welcome.html Attached Images

08-26-2013, 09:13 AM	#8474
SeriouslySinning Drives: 2013 Chevy Camaro 2LT 3.6 V6 Join Date: Apr 2013 Location: United States Posts: 715 View My Garage	BMR 1.2" Spring Install !!!! Wanted to plastidip the rims and paint the calipers but just didnt happen this weekend. __________________ *Seriously Sinning* - "Veronica" Commandment 11 - Thou shall not travel slowly.

08-26-2013, 02:11 PM	#8476
JonnyGray Drives: 2013 Camaro LFX RS Join Date: Jun 2013 Location: Charleston, SC Posts: 91	Plasti dipped hash marks on my AGM __________________

08-26-2013, 02:58 PM	#8479
SeriouslySinning Drives: 2013 Chevy Camaro 2LT 3.6 V6 Join Date: Apr 2013 Location: United States Posts: 715 View My Garage	LOL __________________ *Seriously Sinning* - "Veronica" Commandment 11 - Thou shall not travel slowly.

08-26-2013, 01:25 PM	#8475
Meister Drives: 2016 Corvette Stingray Z51 Join Date: Feb 2013 Location: St. Louis, Missouri Posts: 184	SeriouslySinning, how big of a deal was the lowering spring install? What "special" tools and equipment did you need? Thanks

08-26-2013, 03:00 PM	#8480
CamaroLB SoCal HT5 COTW 12/16/2013 Drives: Burning B Join Date: Jan 2012 Location: Beirut Posts: 666 View My Garage	Finalized my engine cover !! __________________

08-26-2013, 03:02 PM	#8481
omgitsmikeyC Drives: 2014 CTS-V- totalled/ 45TH ss- SOLD Join Date: May 2013 Location: DFW, TX Posts: 1,096 View My Garage	Oil change with Amsoil and w WIX filter. Awaiting delivery of my CAI and RX catchcan. __________________ 2014 CTS-V... with some go-fast bits coming

08-26-2013, 05:09 PM	#8482
layzurguy Ride On!!!! Drives: 2012 SS Ragtop Join Date: May 2012 Location: Race City USA Posts: 605 View My Garage	Twisted myself into the trunk to try and figure out how to remove the 3rd brake light. No success. Massage tomorrow to get the kinks out of my back now. __________________

08-26-2013, 06:50 PM	#8483
Lord Ryan Drives: Chevy Prelude RS V4 Hot Pink Ed. Join Date: Jun 2013 Location: Avon Lake Posts: 308	After market black bezels came in today. Only noticeable difference is my bank account is $70 lighter. __________________ Multiple coated Plasti-dipped rims. Double dipped blacked out Bowtie. Quad low quality plastic flat black tail light bezels. Super charged vanilla air freshner. DIY sound system.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM