FS: 1177+whp IPS built 2010 Camaro

[walhan_qtr]

2010 2SS/RS Camaro Fully Built by IPS Motorsports.

22134miles on the car. less than 200 miles after the built on everything.


Looking to get $65000 OBO

over 80k spent on Mods/Labor/Tuning not including the price of the car. I have most of the Invoices that will be given to the buyer to show it too.

if you don't like the price, thats fine just move on. Very simple. or just post, email, PM an offer. The worst that will happen is me saying no! obviously if I get a silly offer of 45k or whatever then most likely you wont even get a response from me. Sorry if I sound like a Jerk, but I just don't want to waste your time or mine.

Basic run down

** Engine **
Forged 427ci LSX (Callies Crank/billet rods/wiesco Turbo pistons)
GM Performance 6bolt LS3 Heads
IPS Boost II Cam
Fast 102 intake
ARP hardware all through
Comp short-travel Race lifters
Harland Sharp Rocker Arm Tri-union upgrade
Meziere electric water pump
Ported and Polished throttle body


** IPS Turbo Kit **
IPS Motorsports Camaro Front Mount Intercooler -6" Thick USA Made Core
-Custom Crash Bar
-4" Intercooler Piping
GT3794HTA Turbos
Machiene vacumm block for sensor
Custom Coolant fitting side of block for TT kit routing
AEM tru-boost


** Drivetrain **
RPM Built TR6060
Driveshaft shop 9" rear end conversion kit W/ strange center section
Farks anti wheel hop kit
Hendrix Street Slayer Carbon Triple Disc Clutch kit

** Fuel System **
IPS Eliminator Drop In 1400hp Complete fuel system
FIC 1100cc fuel injectors
Fuel pump harness

** Exhaust **
3" KOOKS custom 3" Muffler-less Catback exhaust Clamps and hangers for new system
Hedman Headers tublaur manifold
3" Band clamp

** Oil cooler **
Setrab Oil Cooler
Lingenfelter oil cooler adapter block Peterson y blocks

** Suspension/Wheels **

Pfadt Drag Suspension/Coilovers
Custom 15" Rear Trailing Arms and Lower Control Arms Package
C5 Corvette Rear Brake Parts Modified to Fit 15" Kit (Calipers, Brackets, Rotors, Pads, Lines, Etc.)
PFADT 2010+ Camaro Adjustable Rear Tie Rods
Farks Supercar 2010+ Camaro No-Hop Bushings
ARP Wheel Studs
Weld RT S Rear Black Center Wheels
Mickey Thompson Rear Drag Radials (325/50/15)
Bolt Thru Valve Stems
Rear 1/4inch Wheel Spacers (Billet Aluminum)
Shank Style Lug Nuts

http://store.ipsmotorsports.net/cama...n-package.html



I know I am messing like bunch of stuff. but this is the main components I think.

Car made 1177whp on C16 around 20psi
990whp on 93oct No meth.

the engine/turbo is capable for more but need to get a ProEFI or something similar to run more boost and have better control and safety.


Hit me up if interested.


here is couple quick pictures. I will post some good ones in the next few days. I have some good ones but I did something that caused the quality to get all messed up so I will have to get some new ones.






Thanks!

[greedygenius]

damn thats nice any 1/4 #s?

[sprayedv]

Probably get a negative response from others but damn dude you can find build TT z06s and c6s for much less than that.

GLWS.. but think you need to bring the price down a bit... There's even a 1300whp 1LE for less than this.

[walhan_qtr]

Originally Posted by greedygenius

damn thats nice any 1/4 #s?

never been on a track. only few highway pulls...

[walhan_qtr]

Originally Posted by sprayedv

Probably get a negative response from others but damn dude you can find build TT z06s and c6s for much less than that.

GLWS.. but think you need to bring the price down a bit... There's even a 1300whp 1LE for less than this.

when you say much less what do you mean exactly?? $65-70+?? any 1000+ z06 will be in the $65-70+... I know that because I have a 1200+whp Z06 and been getting over $65 offers on it. all depends on the car and who built it.

if there is a car that was built by a local shop that only few knows about it, it will most likely cost less and be cheaper than a car that was built by say Dallas Performance or IPS.

I am not looking to get $71000 honestly, but I know how people will always lowball you, so you have to get the price up to get what you want out of it. I am open to offers just like mentioned in my first post. so if someone is interested, he/she can send me an offer and we will go from there. if I like it, then we might work the deal, if I don't, it will be very simple, I will say no or send a counter offer........

saw the 1LE. very nice car, and good build, but the stuff on this car is more and "better" quality. not saying its bad, just not the same really

I like your post, such posts are fine with me... but what I don't like to see is people that most likely not even looking for a car to buy but will just come and post those little stupid offers or comments

[greedygenius]

ive seen 800 wheel 5th gens built by no name shops go for 40-50k theres no reason a 1000wheel camaro built by IPS wouldnt sell for 60k+. the 71k asking price is a little high but with how bad people low ball now days I see why he is asking that.

[walhan_qtr]

Originally Posted by greedygenius

ive seen 800 wheel 5th gens built by no name shops go for 40-50k theres no reason a 1000wheel camaro built by IPS wouldnt sell for 60k+. the 71k asking price is a little high but with how bad people low ball now days I see why he is asking that.

EXACTLY!!! you Sir really understand. I also saw your car for sale so you probably know better. good luck with that. very nicely built and nice car!!

again I am open to offers. I have invoices on this car for over $75k. can you build a similar car for less??? absolutely but it wont be IPS! that I know for sure!

[nitto85]

That is a beast, what is the suspension and wheels/tire setup?

A side note, I really wish we had some BST forum rules, I'm tired of people posting their 2cents on a price (or asking for pictures) when they really have no intentions of buying.

[JLE58]

Originally Posted by sprayedv

Probably get a negative response from others but damn dude you can find build TT z06s and c6s for much less than that.

GLWS.. but think you need to bring the price down a bit... There's even a 1300whp 1LE for less than this.

That 1le didn't have half the money this car has in it....

[walhan_qtr]

Originally Posted by mst504

That is a beast, what is the suspension and wheels/tire setup?

A side note, I really wish we had some BST forum rules, I'm tired of people posting their 2cents on a price (or asking for pictures) when they really have no intentions of buying.

good question lol. as I said I am forgetting bunch of stuff. Pfadt coilovers. COR wheels in the front with Nitto invo tires, and Weld Racing 15inch on the back with the small brake kit and MT tires.

[walhan_qtr]

Originally Posted by JLE58

That 1le didn't have have the money this car has in it....

Thanks exactly what I am saying. yes its making the power, but not the same quality parts and this thing have at least 25k more in it (probably even more)...

again maybe you can build a similar setup with the same power or even more, but wont be by IPS!! this car spent way to long at IPS to get it all done RIGHT. almost 1000whp on 93oct pump gas and no Meth.. you don't see that very often. and for people that don't like running Race fuel, you can always tune it on E85 if thats available at your area and get 1200+whp no problem. or run Meth which is installed now but needs to get wired. The thing I was told is I will probably need to run like a ProEFI or something similar to really be able to run more boost and get it hooking!

[AquaRSSS]

Bad ass!! These are the numbers I'd like to get from a future build.
Where did you put the turbos? Got any engine pics to post?
thanks

[Vette TPI]

Sure wish I had the money to take that car off your hands! GLWS

[ruquik]

any videos of it?? do you have any more detailed pics