Scoche / Alpine wiring harness pics please - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Natikal · 09-17-2013, 11:53 AM

I bought a used kit and some of the wires are cut and i am not sure where they are suppose to go. Mainly the solid white and white/black lined wires. There are 2 sets. so 6 total wires cut 4 wires connect to each other and 2 go to the radio harness. i just dont know what 4 connect to each other. If someone that has a a kit could take some pics of the harness that would be awesome. Oh and it is the plug that the onstar unit would connect to.

Knockoutpie · 09-17-2013, 12:52 PM

If i'm not mistaken the white and white/black wires are for... Left and right front speaker channels..

Twilborne · 09-17-2013, 01:56 PM

http://www.scosche.com/downloads/dl/...structions.pdf

This may help.

Natikal · 09-17-2013, 03:05 PM

Correct they are for speakers but audio from radio goes into the OnStar unit then a set goes from the OnStar unit to the X plug that runs to the boston amp.

Also i found the pdf manual but the doesn't give me the info i need. Thanks for posting though.

Basically i just need to know what set of white wires from the OnStar plug/unit go to the radio and what ones go the the X plug.

Natikal · 09-18-2013, 08:46 AM

In case anyone else has this issue, i figured it out.

If you look at the Onstar plug you will see the other speaker wires going to the X plug. I took the white set of wires on that same row and connected those to the white wires coming form the X plug. I then took the remaining white wires on the other row and ran those to the radio. Onstar works and i have audio in the front left speaker. So all is well. Thanks all for the help.

09-17-2013, 11:53 AM	#1
Natikal NXTIME Drives: 2014 Camaro 1LE Join Date: Apr 2010 Location: Holly, MI Posts: 62	Scoche / Alpine wiring harness pics please I bought a used kit and some of the wires are cut and i am not sure where they are suppose to go. Mainly the solid white and white/black lined wires. There are 2 sets. so 6 total wires cut 4 wires connect to each other and 2 go to the radio harness. i just dont know what 4 connect to each other. If someone that has a a kit could take some pics of the harness that would be awesome. Oh and it is the plug that the onstar unit would connect to.

09-17-2013, 12:52 PM	#2
Knockoutpie Drives: 2014 2SS RS Coupe Join Date: Aug 2013 Location: Phoenix Posts: 1,454	If i'm not mistaken the white and white/black wires are for... Left and right front speaker channels..

09-17-2013, 01:56 PM	#3
Twilborne Drives: 2013 Blue Ray Blue 2LT Join Date: Sep 2009 Location: Orange Park, Fl. Posts: 376 View My Garage	http://www.scosche.com/downloads/dl/...structions.pdf This may help.

09-17-2013, 03:05 PM	#4
Natikal NXTIME Drives: 2014 Camaro 1LE Join Date: Apr 2010 Location: Holly, MI Posts: 62	Correct they are for speakers but audio from radio goes into the OnStar unit then a set goes from the OnStar unit to the X plug that runs to the boston amp. Also i found the pdf manual but the doesn't give me the info i need. Thanks for posting though. Basically i just need to know what set of white wires from the OnStar plug/unit go to the radio and what ones go the the X plug.

09-18-2013, 08:46 AM	#5
Natikal NXTIME Drives: 2014 Camaro 1LE Join Date: Apr 2010 Location: Holly, MI Posts: 62	In case anyone else has this issue, i figured it out. If you look at the Onstar plug you will see the other speaker wires going to the X plug. I took the white set of wires on that same row and connected those to the white wires coming form the X plug. I then took the remaining white wires on the other row and ran those to the radio. Onstar works and i have audio in the front left speaker. So all is well. Thanks all for the help.