Fixed the one thing that annoyed on my Rx Catch Can

[JANNETTYRACING]

Originally Posted by 2SSCAMARO

It's hard to see from the photo but the shut off handle looks like it swings toward the threaded nipple to open the valve. If so, the handle would contact the bottom of the catch can before opening fully.

We suggest putting the Valve at the bottom of the Hose so you can drain it from under the car while doing an oil change and it will minimize dripping after draining if the valve is at the bottom.

Ted.

[JANNETTYRACING]

Originally Posted by J-ROD-210

Very cool ! Where do I find the drain fittings at hardware store or automotive parts store ?

I offer it in a kit.

[Agent WD-40]

Originally Posted by 2SSCAMARO

It's hard to see from the photo but the shut off handle looks like it swings toward the threaded nipple to open the valve. If so, the handle would contact the bottom of the catch can before opening fully.

The valve I got from Home Depot swings 180 degrees. So I needed to make sure it was in the correct position before I screwed it on. In the position it came out of the package in the handle would have it the bottom of the can while opening it. Turning to the other size before screwing it on solve that though.

[Iam Broke]

All I've gotten out of my RX catch can so far after 500 miles is condensate, not that I'm complaining.

[William.23]

Originally Posted by JANNETTYRACING

I will One Up You,
Install a barbed fitting in the catch can,
install a barbed fitting in the ball valve,
install a 2 foot hose between them
Mount the ball valve to your frame easily accessable while doing oil change.

Drain Catch can from under car.

Gain Extra storage space for collected oil by the volume of the hose.

Ted.

Do you have a write up on this? Or pictures of these? Thanks , also I see you sell the cc's themselves do you sell a kit?

[Blk-Ice]

This is a great idea!

[Denis]

Very good idea. Works great.

[JANNETTYRACING]

Originally Posted by William.23

Do you have a write up on this? Or pictures of these? Thanks , also I see you sell the cc's themselves do you sell a kit?

Here you go.

http://www.jreperformanceparts.com/2...valve-kit.html