09-17-2013, 11:53 AM | #1 |
NXTIME
Drives: 2014 Camaro 1LE Join Date: Apr 2010
Location: Holly, MI
Posts: 62
|
Scoche / Alpine wiring harness pics please
I bought a used kit and some of the wires are cut and i am not sure where they are suppose to go. Mainly the solid white and white/black lined wires. There are 2 sets. so 6 total wires cut 4 wires connect to each other and 2 go to the radio harness. i just dont know what 4 connect to each other. If someone that has a a kit could take some pics of the harness that would be awesome. Oh and it is the plug that the onstar unit would connect to.
|
09-17-2013, 12:52 PM | #2 |
Drives: 2014 2SS RS Coupe Join Date: Aug 2013
Location: Phoenix
Posts: 1,453
|
If i'm not mistaken the white and white/black wires are for... Left and right front speaker channels..
|
09-17-2013, 01:56 PM | #3 |
Drives: 2013 Blue Ray Blue 2LT Join Date: Sep 2009
Location: Orange Park, Fl.
Posts: 376
|
|
09-17-2013, 03:05 PM | #4 |
NXTIME
Drives: 2014 Camaro 1LE Join Date: Apr 2010
Location: Holly, MI
Posts: 62
|
Correct they are for speakers but audio from radio goes into the OnStar unit then a set goes from the OnStar unit to the X plug that runs to the boston amp.
Also i found the pdf manual but the doesn't give me the info i need. Thanks for posting though. Basically i just need to know what set of white wires from the OnStar plug/unit go to the radio and what ones go the the X plug. |
09-18-2013, 08:46 AM | #5 |
NXTIME
Drives: 2014 Camaro 1LE Join Date: Apr 2010
Location: Holly, MI
Posts: 62
|
In case anyone else has this issue, i figured it out.
If you look at the Onstar plug you will see the other speaker wires going to the X plug. I took the white set of wires on that same row and connected those to the white wires coming form the X plug. I then took the remaining white wires on the other row and ran those to the radio. Onstar works and i have audio in the front left speaker. So all is well. Thanks all for the help. |
|
|
|
|