Camaro on lot with swirl marks! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

my2010camaross · 07-22-2009, 11:59 PM

i cant believe anything with out a picture.

SummoneR · 07-23-2009, 02:01 AM

Quote:

Originally Posted by fbodfather

One word:

ZAINO!

(www.zainostore.com)

Claybar the car and then add Zaino finish....you can actually build coats of it.....

I've never seen any other polish or wax that brings out the depth of color (metallics) or makes a Black car look this good.......

That's all the endorsement I need!!

SummoneR · 07-23-2009, 02:02 AM

Quote:

Originally Posted by my2010camaross

i cant believe anything with out a picture.

You'll see some beautiful ZAINOED Cars!

Or did you mean the swirl marks?
In that case.

Moose · 07-23-2009, 09:17 AM

Quote:

Originally Posted by fbodfather

One word:

ZAINO!

(www.zainostore.com)

Claybar the car and then add Zaino finish....you can actually build coats of it.....

I've never seen any other polish or wax that brings out the depth of color (metallics) or makes a Black car look this good.......

Quote:

Originally Posted by my2010camaross

i cant believe anything with out a picture.

Now THERE'S AN ENDORSEMENT!

Hopefully this pic. will help convince you 'my2010camaross';

Its not one of my "close ups", but it gives you a good idea of the results achieved using Zaino.

(I have more pics. if you need further convincing.

)

heidi · 07-23-2009, 06:28 PM

I am a believer, I think I will try some. Did you only get it at their website?

SSooch, the swirl marks I am talking about were put on by people that don't know how to wax a black vehicle. Anyway I was number 2 for the car and it is gone...not meant to be. I have time to sell my truck.

Jeanius · 07-23-2009, 10:27 PM

where is bell040? he should have some proof by now

Moose · 07-24-2009, 09:29 AM

Quote:

Originally Posted by heidi

I am a believer, I think I will try some. Did you only get it at their website? .

I would suggest you contact Sal (www.zainobros.com) and see if he has a distributor near where you live. If not, place and order directly from their site...they get the prodcut to you pretty quickly.

formulahawk · 07-29-2009, 12:37 AM

Quote:

Originally Posted by my2010camaross

i cant believe anything with out a picture.

Here you go:

NAHURRY · 07-29-2009, 07:37 AM

It only takes 1 bad washing tecnicue to get swirls.

Dr Jkel · 07-29-2009, 07:52 AM

I concur with this, I have a RJT put 3 coats of Zaino and the gloss enhancer, it is awesome.

Quote:

Originally Posted by fbodfather

One word:
ZAINO!

(www.zainostore.com)

Claybar the car and then add Zaino finish....you can actually build coats of it.....

I've never seen any other polish or wax that brings out the depth of color (metallics) or makes a Black car look this good.......

CamaroScotty · 07-29-2009, 07:55 AM

Ever see a new corvette in black a few months old, before wax? It's not a sexy picture......but with the right "make up", she looks pretty!

a6pk2go · 07-29-2009, 07:55 AM

I had a worst experience than swirl marks when my wife let someone detail our 98 Monte Carlo. He must have been pretty inexperienced because he completely removed the clear coat off the hood on the front of the car and this Texas sun had it oxidized in no time. I finally had it repainted but I got some good wax and it looks pretty decent now.

I would have to agree that if you have a good car wax that should/will take care of the swirls.

fmdog44 · 07-29-2009, 11:49 AM

Mequire's Swirl-X

CarCareDepot · 07-30-2009, 07:44 AM

If the swirl marks are really bad - the only way to get them out is machine polish it. You can mask it or attempt to hide them otherwise. A wax is a protectant over the clear coat, not correcting the clear coat.

2 Before and afters using mild swirl removers and glazes from Poorboy's World a Flex buffer and Lake country polishing pads:

(If anyone is interested in a FLEX buffer use FLEX15 for a 15% off discount @ www.carcaredepot.com)

07-23-2009, 10:27 PM	#20
Jeanius Drives: Blk/Blk 2018 Sierra SLT Join Date: Dec 2006 Location: Golden State Posts: 2,925	where is bell040? he should have some proof by now __________________ SOLD: 2SS LS3 M6 - MGW - Dynatech LT's HF Cats - Magnaflow Street CB - ADM Race CAI - Pedders Xa Coilovers - Pfadt Sways TRADED: 2016 2SS M6

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 06:56 PM
SEMA Camaro: Yellow Camaro Concept	Tran	Camaro Photos \| Spyshots \| Video \| Media Gallery	45	09-01-2011 03:19 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 08:05 PM
Detroit News panel wants GM to build Camaro concept	Tran	5th Gen Camaro SS LS LT General Discussions	12	03-15-2009 05:38 PM

07-22-2009, 11:59 PM	#15
my2010camaross ss Drives: all black ss Join Date: Dec 2008 Location: texas Posts: 331	i cant believe anything with out a picture.

07-23-2009, 06:28 PM	#19
heidi Drives: Black SS, Black Expedition Join Date: Jul 2009 Location: Florida Posts: 29	I am a believer, I think I will try some. Did you only get it at their website? SSooch, the swirl marks I am talking about were put on by people that don't know how to wax a black vehicle. Anyway I was number 2 for the car and it is gone...not meant to be. I have time to sell my truck.

07-29-2009, 07:37 AM	#23
NAHURRY Love's to Detail Drives: 2010 SS,97silverado/08crewcab Join Date: Oct 2008 Location: Greenville SC. Posts: 1,421	It only takes 1 bad washing tecnicue to get swirls.

07-29-2009, 07:55 AM	#25
CamaroScotty Account Suspended Drives: Your new SLP Camaro! Join Date: Jul 2008 Location: Cedarburg, WI Posts: 6,790	Ever see a new corvette in black a few months old, before wax? It's not a sexy picture......but with the right "make up", she looks pretty!

07-29-2009, 07:55 AM	#26
a6pk2go Drives: ... Join Date: Oct 2008 Location: ... Posts: 1,721	I had a worst experience than swirl marks when my wife let someone detail our 98 Monte Carlo. He must have been pretty inexperienced because he completely removed the clear coat off the hood on the front of the car and this Texas sun had it oxidized in no time. I finally had it repainted but I got some good wax and it looks pretty decent now. I would have to agree that if you have a good car wax that should/will take care of the swirls.

07-29-2009, 11:49 AM	#27
fmdog44 Drives: 1965 impala Join Date: Apr 2008 Location: Houston, TX Posts: 63	Mequire's Swirl-X

07-30-2009, 07:44 AM	#28
CarCareDepot Drives: 09 Vette Join Date: Mar 2009 Location: Milwaukee, WI Posts: 13	If the swirl marks are really bad - the only way to get them out is machine polish it. You can mask it or attempt to hide them otherwise. A wax is a protectant over the clear coat, not correcting the clear coat. 2 Before and afters using mild swirl removers and glazes from Poorboy's World a Flex buffer and Lake country polishing pads: (If anyone is interested in a FLEX buffer use FLEX15 for a 15% off discount @ www.carcaredepot.com)