What Did You Do To Your Camaro Today? - Page 657 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

AG1LE · 11-24-2013, 07:19 PM

Quote:

Originally Posted by Kawirocket674

Would of loved to do it that way but unfortunately I don't have homelink since mine is a 1SS. But for $15 dollars of wire and connectors and a few hours of time, a pretty fun upgrade. They should do that from the factory!

I really like the added switch on your console - if someone would come up with a 3-way switch like that, with the options (1) Always Closed (quiet), (2) Normal NPP operation, (3) Always Open (loud), I would do that and get rid of the M2W

Kawirocket674 · 11-24-2013, 07:28 PM

Quote:

Originally Posted by JMWNERW

I really like the added switch on your console - if someone would come up with a 3-way switch like that, with the options (1) Always Closed (quiet), (2) Normal NPP operation, (3) Always Open (loud), I would do that and get rid of the M2W

Definitely, that would be awesome!

Mean Green Z28 · 11-24-2013, 08:53 PM

You'll should do a latching style relay with two momentary buttons that would turn it on with one and off with the other but also reset every time you turn the car off ... but that's the engineer in me talking lol

Shift_Rejected · 11-25-2013, 08:44 AM

Put new rally stripes on over the weekend. Hoping to get better pics later.

Name: ImageUploadedByTapatalk1385390642.223581.jpg
Views: 609
Size: 254.1 KB

Name: ImageUploadedByTapatalk1385390642.223581.jpg
Views: 609
Size: 254.1 KB

Name: ImageUploadedByTapatalk1385390651.975304.jpg
Views: 593
Size: 238.4 KB

Sent from my iPhone using Tapatalk - now Free

ChevyBoy305 · 11-25-2013, 08:47 AM

I had the Wheels painted black. I use to have them Plasti dipped but I do not recomend the plasti dip on wheels because it was not fun getting it off, and yes i put plenty of coats. Also the plasti dip looks cheep and unfinished IMO. Next is lowering springs

PalmerGA · 11-25-2013, 05:25 PM

Took her to the dealer with MyLink issues. Was there all day while the tested and re-tested, called GM tech, then finally determined I needed a new MyLink unit. Car's still there. Driving a Malibu rental

until they get the new unit (hopefully tomorrow) and install it.

1st problem I've had with the car.

smokin_aces · 11-25-2013, 05:42 PM

smoked the side markers. much better look

DocMartens · 11-25-2013, 07:38 PM

Quote:

Originally Posted by JMWNERW

"Mild 2 Wild" (got mine from Apex)

http://www.camaro5.com/forums/showth...ight=Mild+Wild

thanks!

Chevrolet Customer Svc · 11-25-2013, 09:30 PM

Hi PalmerGA,

Please keep us posted on this repair. We are happy to assist further if necessary.

Jessica
Chevrolet Customer Care

Quote:

Originally Posted by PalmerGA

Took her to the dealer with MyLink issues. Was there all day while the tested and re-tested, called GM tech, then finally determined I needed a new MyLink unit. Car's still there. Driving a Malibu rental

until they get the new unit (hopefully tomorrow) and install it.

1st problem I've had with the car.

lbheat · 11-26-2013, 07:46 AM

Adjust a belt slip.....

Hou78ston · 11-26-2013, 07:57 AM

I would never drive my car to Walmart.

aggieguy13 · 11-26-2013, 06:34 PM

Used it to bring home a 51" plasma

SIM2LS13 · 11-26-2013, 06:39 PM

Installed my Elite Engineering catch can and CAI intake.

Aequitas & Veritas · 11-26-2013, 06:50 PM

Planned out some black Friday mods!

11-24-2013, 08:53 PM	#9187
Mean Green Z28 Drives: 2010 2SS Join Date: Aug 2013 Location: Annapolis, MD Posts: 940 View My Garage	You'll should do a latching style relay with two momentary buttons that would turn it on with one and off with the other but also reset every time you turn the car off ... but that's the engineer in me talking lol __________________ 2010 2SS - CAI Intake, ADM Scoop, RotoFab Washer relo. LT Headers and off-road pipes, X-pipe, Muffler Deletes, ZL1 Spoiler, Technostalgia Tail-lights '98 T/A (Sold) - Forged 6.0ltr, MS3, P&P'd Heads/Valves, 90MM FAST/TB, Headers, 3" Y-pipe, 4" Mufflex Catback. Koni Adjustables w/GC coilovers (550/175), Strano Sway Bars '94 Z28 (Sold) ... LS1 swap (basically same setup as the T/A), TH350/3500 stall ... swapped it all into the T/A -- >> Some of my Projects My Fquick Page

11-25-2013, 08:44 AM	#9188
Shift_Rejected 2010 2SS RS Drives: 2010 2SS RS (L99) Join Date: Aug 2013 Location: Wilmington, DelaWHERE Posts: 749	Put new rally stripes on over the weekend. Hoping to get better pics later. Sent from my iPhone using Tapatalk - now Free __________________ ~ Build Thread \| 371HP & 390 TQ Performance Mods: K&N Cold Air Intake \| Pypes Cat-Back Exhaust \| Aluminum Paddle Shifters \| VaraRam Wedge \| Cross Drilled/Slotted Rotors \| Hawk HPC Pads \| M.M. Ported Throttle Body \| Kooks 1 7/8 Headers w/ High Flow Cats \| Dyno Tune @ RPM Cosmetic Mods: Rally Stripes (style1, style2, style2.2) \| Splitter \| Painted Calipers \| Door Projector Lights \| Front-Emblem Delete \| Cup Holder Lighting \| Quarter Window Covers \| Phantom Grille \| Ghosted Side Markers \| Tinted Fog Lights \| ZL1 Rockers \| Tail Light Bezels

11-25-2013, 08:47 AM	#9189
ChevyBoy305 Drives: 2012 2LT RS Camaro Join Date: Aug 2012 Location: Miami Posts: 26 View My Garage	I had the Wheels painted black. I use to have them Plasti dipped but I do not recomend the plasti dip on wheels because it was not fun getting it off, and yes i put plenty of coats. Also the plasti dip looks cheep and unfinished IMO. Next is lowering springs Attached Images

11-25-2013, 05:25 PM	#9190
PalmerGA Drives: 2013 SIM 1SS/RS L99 Join Date: May 2012 Location: Southwest GA Posts: 8,754 View My Garage	Took her to the dealer with MyLink issues. Was there all day while the tested and re-tested, called GM tech, then finally determined I needed a new MyLink unit. Car's still there. Driving a Malibu rental until they get the new unit (hopefully tomorrow) and install it. 1st problem I've had with the car. __________________ 2013 1SS/RS Coupe L99, Stainless Power Works LT Headers, SCT X4 Custom Tune from RDP, CAI Inc. Air Intake w/ Apex Scoop, VMAX CNC Ported Throttle Body, Solo Axle-Back Exhaust w/ J-pipes, Apex Catch Can, Husky Splash Guards, Heritage Grille, 3D Carbon Rear Spoiler, Oracle Chrome Turn Signal Bulbs, GM Reverse Light Trim Billets, Gorilla Black Locking Lugs, Emblem Pros Retro SS Badges/Custom Retro SS Kickplates/Under-hood Bowtie, 35% window Tint, Nitto Motivo Tires (6-8-18)

11-25-2013, 05:42 PM	#9191
smokin_aces Drives: 2010 ss Join Date: Nov 2013 Location: ohio Posts: 28	smoked the side markers. much better look __________________ 2010 2SS United States Marine Corps (2008-2012) 2111 Small Arms Repair Tech OEF 2011 Helmand Province

11-26-2013, 07:46 AM	#9194
lbheat Echale Gas [COTW 3/10/14] Drives: 2010 Camaro SS/RS Supercharged Join Date: Aug 2010 Location: La Puente, Ca Posts: 1,372	Adjust a belt slip..... __________________ Kenne Bell 502 rwhp/ 471 rwtq at 9psi (daily driver...for now) Performance: Corsa catback, JRE Super Tensioner, dual pass heat exchanger, R1 slotted & Dimpled rotors cryogenically treated Cosmetic: Giovanna kilis 22", zl1 mailslot bumper, Custom Emblem Pro Badge, painted calipers

11-26-2013, 07:57 AM	#9195
Hou78ston Drives: vw Join Date: Nov 2013 Location: usa Posts: 5	I would never drive my car to Walmart.

11-26-2013, 06:34 PM	#9196
aggieguy13 Drives: 2013 SS/RS VR 1LE Join Date: Jun 2013 Location: MCKINNEY,TX Posts: 1,278 View My Garage	Used it to bring home a 51" plasma __________________ 2013 SS/RS 1LE VR-Backup System, SOLO Perforsance HF Cats, Muffler Delete, BBK Off-road X-pipe 2002 35th Aniversary SLP SS-Sold

11-26-2013, 06:39 PM	#9197
SIM2LS13 Drives: 2013 2LS SIM Join Date: Aug 2013 Location: Las Vegas, NV Posts: 145	Installed my Elite Engineering catch can and CAI intake.

11-26-2013, 06:50 PM	#9198
Aequitas & Veritas Drives: 2010 Camaro 2LT RS, 2009 GTR Join Date: May 2009 Location: Kansas Posts: 2,559 View My Garage	Planned out some black Friday mods! __________________ Build thread: http://www.camaro5.com/forums/showthread.php?t=152335 Photos: www.flickr.com/bradbeer GTR Instagram: @NoCrustGTR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 12:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM