G8 Modded Pedals - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Watchamacoolitt · 07-26-2009, 02:44 PM

Tried entering the part numbers but it says no parts were found.

Mod007 · 07-26-2009, 05:26 PM

Quote:

Originally Posted by Watchamacoolitt

Tried entering the part numbers but it says no parts were found.

Ya that happened to me too you have to go to the home page the .com one, not .net, then go to advance search and put the numbers in.

Watchamacoolitt · 07-26-2009, 06:16 PM

thanks for replying, tried what yo utold me to do and still doesn't work. I don't know what i am doing wrong?

Mod007 · 07-26-2009, 06:53 PM

Only these two work.

92173105 clutch pedal cover.
92213647 accelerator pedal.

shiftz33 · 07-28-2009, 12:57 PM

I received the 92214916 pedal kit (automatic tranny) and I installed them today. It took about 20 minutes.

I used a small drill press vice (with a micro fiber towel for padding) to loosely hold the sides of the gas pedal and I used a wide blade screw driver to pry up the aluminum tabs of the G8 gas pedal cover from the G8 assembly.

I used a flat bar on the face of the gas pedal cover (with a micro fiber towel for padding) to distribute the force and I used an adjustable pliers to bend the aluminum tabs on the gas pedal cover. That work fairly well.

I used some zaino detailing spray to lube up the brake pedal cover and I used a couple bike tire installation tools (plastic) to help bring the lip of the brake pedal cover over the edge of the brake pedal. That work well too.

Looks great!

BlackIce1066 · 07-29-2009, 06:35 AM

Yeah, most of the work is in putting the brake pedal on. If your check engine light comes on after pluging in the accelorator pedal, it will clear after 3-4 on and off cycles.

Mod007 · 08-07-2009, 04:50 PM

I just ordered my GXP pedals for my 6MT, they said there a special ordered so it can take up to 10 days to get here. I'll post some pics after I get them.

Total was $121

GamecockFan · 08-08-2009, 11:21 AM

Quote:

Originally Posted by Teccboxx

As for the gas pedal you have to take the cover the new gas pedal as it will not work with the Camaro as the connectors are different. It took nearly an hour.

First want to say nice job and thanks for the instructions. You are doing some great stuff here! I just got my pedals in yesterday and did the install today. I quoted that line because I got concerned when I saw that it took nearly an hour to get that cover off, and once I looked at it good, I knew why. However, I discovered using a window paint scraper, I was able to pry the pieces up enough to get a set of pliers (wrapped in a towel) to bend them out far enough to pull the pedal cover off, all within a matter of minutes.

Another note: Once you have the cover off the new pedal, before putting it on the Camaro one, bend the tabs back in a bit, so that you have to sort of snap it on. It makes the cover tighter overall and makes it easier to attach.

About the brake pedal: I removed the rubber from the plastic silver piece (it was glued in a few places), that made it a LOT easier to install. Then i just popped the plastic piece back over it.

Just my run-in with the installation and I thought it might help some others out. It really does add a lot. Thanks again for the idea and part info.

walls · 08-08-2009, 12:22 PM

Teccboxx,

What are you doing!? Back to work on that Dash ABL!

tjd24 · 08-08-2009, 08:38 PM

Quote:

Originally Posted by tjd24

Thanks for the extra directions - I've got these on-order and I know between you and Teccboxx's directions the install will be easier.

Thanks to TeccBoxx and PontiacFanic66's directions I got my g8 pedals installed today with no problems - its great when members share how they did their mods and we all benefit - I appreciate it.

For those interested I've scanned the directions that came with the pedals though only applicable for the brake pedal Figures 1 and 2 - the accelerator part is not compatible with the Camaro hence the need to remove the cover off the G8 pedal and install on the Camaro's pedal - see Teccboxx's and PontiacFanic66's posts earlier in this thread.

Tecca · 08-08-2009, 10:16 PM

Quote:

Originally Posted by walls

Teccboxx,

What are you doing!? Back to work on that Dash ABL!

Hey now take it easy, athis ABL thing gave me a pinch nerve

Quote:

For those interested I've scanned the directions that came with the pedals

You got instructions,

Looks great, I think they add alot to the interior.

Mod007 · 08-20-2009, 05:21 PM

Wow I ordered my G8 GXP pedals on Aug 07 and they haven't even been shipped yet! WTF

jdurhan · 08-20-2009, 05:40 PM

Quote:

Originally Posted by Mod007

Wow I ordered my G8 GXP pedals on Aug 07 and they haven't even been shipped yet! WTF

Same here, ordered 08/08.

jhutch · 09-07-2009, 09:53 PM

any updates on installing the pedals on our Manuals?

07-26-2009, 02:44 PM	#43
Watchamacoolitt KJ Drives: CGM 2SS/RS,MT6 sunroof Join Date: May 2009 Location: Hayward, CA Posts: 247 View My Garage	Tried entering the part numbers but it says no parts were found. __________________ “Living with a conscience is like driving a car with the brakes on”

07-26-2009, 06:16 PM	#45
Watchamacoolitt KJ Drives: CGM 2SS/RS,MT6 sunroof Join Date: May 2009 Location: Hayward, CA Posts: 247 View My Garage	thanks for replying, tried what yo utold me to do and still doesn't work. I don't know what i am doing wrong? __________________ “Living with a conscience is like driving a car with the brakes on”

07-26-2009, 06:53 PM	#46
Mod007 Drives: Camaro SS/RS Join Date: May 2009 Location: Austin TX, Posts: 475	Only these two work. 92173105 clutch pedal cover. 92213647 accelerator pedal. __________________ Camaro SS/RS Corsa Catback

07-28-2009, 12:57 PM	#47
shiftz33 Drives: 17 SS Sedan, 04 SSR Join Date: May 2009 Location: Sacramento Posts: 331	I received the 92214916 pedal kit (automatic tranny) and I installed them today. It took about 20 minutes. I used a small drill press vice (with a micro fiber towel for padding) to loosely hold the sides of the gas pedal and I used a wide blade screw driver to pry up the aluminum tabs of the G8 gas pedal cover from the G8 assembly. I used a flat bar on the face of the gas pedal cover (with a micro fiber towel for padding) to distribute the force and I used an adjustable pliers to bend the aluminum tabs on the gas pedal cover. That work fairly well. I used some zaino detailing spray to lube up the brake pedal cover and I used a couple bike tire installation tools (plastic) to help bring the lip of the brake pedal cover over the edge of the brake pedal. That work well too. Looks great! __________________ RetroCarGuy530 YouTube Channel

07-29-2009, 06:35 AM	#48
BlackIce1066 Black Ice Drives: 2SS/RS Black w/ silver ice stripes Join Date: Jul 2009 Location: Pueblo,Co. Posts: 898	Yeah, most of the work is in putting the brake pedal on. If your check engine light comes on after pluging in the accelorator pedal, it will clear after 3-4 on and off cycles. __________________

08-07-2009, 04:50 PM	#49
Mod007 Drives: Camaro SS/RS Join Date: May 2009 Location: Austin TX, Posts: 475	I just ordered my GXP pedals for my 6MT, they said there a special ordered so it can take up to 10 days to get here. I'll post some pics after I get them. Total was $121 __________________ Camaro SS/RS Corsa Catback

08-08-2009, 12:22 PM	#51
walls Drives: Infiniti G37S, Suzuki B-King Join Date: Jul 2009 Location: Dallas, TX Posts: 81	Teccboxx, What are you doing!? Back to work on that Dash ABL! __________________ 2011 Ford Shelby GT500 - Black - SVTPP 2010 VW GTI - Black - Loaded 2008 Suzuki B-King - Black

08-20-2009, 05:21 PM	#54
Mod007 Drives: Camaro SS/RS Join Date: May 2009 Location: Austin TX, Posts: 475	Wow I ordered my G8 GXP pedals on Aug 07 and they haven't even been shipped yet! WTF __________________ Camaro SS/RS Corsa Catback

09-07-2009, 09:53 PM	#56
jhutch Drives: 2010 2SS ABM -Sold Join Date: Jun 2009 Location: mi Posts: 157	any updates on installing the pedals on our Manuals? __________________ 2016 Hyper Blue 2SS M6 White Interior Mag Ride NPP GFX

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM
Zeta (Camaro/Commodore/G8) suspension details	Gatecrasher	Wheels and Tires Talk Sponsored by The Tire Rack	66	04-16-2009 01:11 PM
CONSUMER REPORTS Pontiac G8 GT Test	camaro5	General Automotive + Other Cars Discussion	5	01-10-2009 08:36 AM
19x9.5 with 275/35/19 on a G8	JusticePete	Wheels and Tires Talk Sponsored by The Tire Rack	16	01-01-2009 09:57 PM
Edmunds buys a G8 GT for long term test fleet	Scotsman	General Automotive + Other Cars Discussion	4	04-17-2008 09:21 PM