MRT V1 Quad Exhaust - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bionick · 12-20-2013, 12:00 PM

Quote:

Originally Posted by Dylaqn4567

Diffuser took a while, I'd say 2 weeks

Yeah I can see ha. Mine was ordered on the 15th and it still says the status is on order.
I have my tips and I'm ready to so the muffler delete so this is a bummer ha

Dylaqn4567 · 12-20-2013, 01:22 PM

Quote:

Originally Posted by bionick

Yeah I can see ha. Mine was ordered on the 15th and it still says the status is on order.
I have my tips and I'm ready to so the muffler delete so this is a bummer ha

Yea, I emailed them about 4 times asking when it was supposed to ship haha. Today though, I'm going to get some VHT FlameProof ceramic coating and I'm going to paint my tips matte black!

bionick · 12-20-2013, 01:45 PM

Sweet! I decided to go with the dual 3.5" tips since the 4 inch are going to be out of stock for a bit but I was reading online and it says that the 1LE comes with dual 3.5 so I just went with 3.5

KaBoom1701 · 12-20-2013, 05:23 PM

Any final pics on this?

Dylaqn4567 · 12-20-2013, 06:06 PM

Here is after painting. Again I used VHT FlameProof Ceramic Paint. I have to go through a curing process tomorrow after the tips are installed. They look amazing!

bionick · 12-20-2013, 06:44 PM

Quote:

Originally Posted by Dylaqn4567

Here is after painting. Again I used VHT FlameProof Ceramic Paint. I have to go through a curing process tomorrow after the tips are installed. They look amazing!

Looks awesome! My tips always get super black inside so I should probably consider this haha

Dylaqn4567 · 12-20-2013, 06:52 PM

Quote:

Originally Posted by bionick

Looks awesome! My tips always get super black inside so I should probably consider this haha

So do mine, but now they won't look dirty because they are already black!

BigRed585Lbs · 12-23-2013, 06:25 PM

So..........what happened Saturday?
Pix, sounds, video?

Or it didn't happen.

bionick · 12-26-2013, 07:21 PM

Quote:

Originally Posted by Dylaqn4567

So do mine, but now they won't look dirty because they are already black!

Been on order since the 15th.. So...impatient... Lol

BigRed585Lbs · 12-30-2013, 01:06 PM

So................what happened?

BigRed585Lbs · 01-18-2014, 06:45 PM

Did this great quad tip adventure EVER come to be?

bionick · 01-18-2014, 07:36 PM

Lol I actually got it te other day finally..

delta6 · 01-21-2014, 10:08 AM

First post was dated last November...it's almost late January...I think this thread is about to die. Lol

It's either the quads didn't look good or flushed and need some adjustments or the OP just left this thread hanging. Either way, I just thought of buzzing in.

Dylaqn4567 · 01-21-2014, 07:47 PM

Quote:

Originally Posted by delta6

First post was dated last November...it's almost late January...I think this thread is about to die. Lol

It's either the quads didn't look good or flushed and need some adjustments or the OP just left this thread hanging. Either way, I just thought of buzzing in.

I'm sorry everyone, I did get them installed, but you said it exactly right. They weren't installed correctly the first time so this weekend I'm bringing it to a different shop to redo them. They stuck out way to far and were horrible looking. I will keep everyone updated and I promise to post pictures when they are finally finished.

12-20-2013, 01:45 PM	#45
bionick Drives: 2010 2SS/RS M6 Join Date: Oct 2013 Location: Gilbert, AZ Posts: 931 View My Garage	Sweet! I decided to go with the dual 3.5" tips since the 4 inch are going to be out of stock for a bit but I was reading online and it says that the 1LE comes with dual 3.5 so I just went with 3.5 __________________ 2010 Camaro 2SS/RS \| 416 LS3 \| FED stage 2 heads

12-20-2013, 05:23 PM	#46
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,630	Any final pics on this? __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

12-20-2013, 06:06 PM	#47
Dylaqn4567 Drives: 2012 Chevy Camaro 2LS Join Date: Mar 2012 Location: Scottsdale Posts: 363 View My Garage	Here is after painting. Again I used VHT FlameProof Ceramic Paint. I have to go through a curing process tomorrow after the tips are installed. They look amazing! Attached Images __________________

01-18-2014, 07:36 PM	#54
bionick Drives: 2010 2SS/RS M6 Join Date: Oct 2013 Location: Gilbert, AZ Posts: 931 View My Garage	Lol I actually got it te other day finally.. __________________ 2010 Camaro 2SS/RS \| 416 LS3 \| FED stage 2 heads

01-21-2014, 10:08 AM	#55
delta6 USN-MSC Drives: 2012 Camaro TF3 #427 Join Date: Jan 2013 Location: SoCal Posts: 237 View My Garage	First post was dated last November...it's almost late January...I think this thread is about to die. Lol It's either the quads didn't look good or flushed and need some adjustments or the OP just left this thread hanging. Either way, I just thought of buzzing in. __________________ “The winner ain’t the one with the fastest car, it’s the one who refuses to lose.”

12-23-2013, 06:25 PM	#50
BigRed585Lbs Drives: Sierra and Tahoe Join Date: Jul 2010 Location: By Marion, MS Posts: 1,324 View My Garage	So..........what happened Saturday? Pix, sounds, video? Or it didn't happen.

12-30-2013, 01:06 PM	#52
BigRed585Lbs Drives: Sierra and Tahoe Join Date: Jul 2010 Location: By Marion, MS Posts: 1,324 View My Garage	So................what happened?

01-18-2014, 06:45 PM	#53
BigRed585Lbs Drives: Sierra and Tahoe Join Date: Jul 2010 Location: By Marion, MS Posts: 1,324 View My Garage	Did this great quad tip adventure EVER come to be?