02-16-2014, 12:09 AM | #1 |
Account Suspended
Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011
Location: Oxnard. CA
Posts: 1,747
|
2013 1LE Pfadt coilovers???
So I'm currently with 509 RWHP with the Turbonetics kit 76 at 5.8 psi. I'm gonna do a Comp cam . Pushrods , dual valve springs. Increase boost and custom tune.
Plan is to end up at 600rhwp So I know I need to also upgrade my suspension to avoid wheel hop? I been looking at the Pfadt cool overs but they are $2,790. Any info? Meaning has anyone with a 1LE done it? Are they worth the money!? |
02-16-2014, 12:36 AM | #2 | |
Drives: 14 1SS Camaro 1LE, NPP, Recaros Join Date: Nov 2013
Location: NC
Posts: 819
|
IMO. Wheel hop is from all the factory rubber bushings in cradle, differential and weak tie rods and control arms. I'd start there 1st. Shocks will help with cornering, braking and weight transfer from side to side/front to back and absorbing change in the road surface.
|
|
02-16-2014, 12:40 AM | #3 | ||
Account Suspended
Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011
Location: Oxnard. CA
Posts: 1,747
|
Quote:
Have you upgraded anything on your 1LE yet? |
||
02-16-2014, 12:42 AM | #4 |
Account Suspended
Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011
Location: Oxnard. CA
Posts: 1,747
|
Those are the exact subframe mounts I was looking into
|
02-16-2014, 01:02 AM | #5 |
Drives: 14 1SS Camaro 1LE, NPP, Recaros Join Date: Nov 2013
Location: NC
Posts: 819
|
Waiting on a couple more back-ordered parts, then I'm dropping rear cradle and adding everything @ one time. I've been told the poly bushings in the differential get eaten up so I'm waiting on those to I change them out over OEM. I have less than 1K on the car, getting ready for the new year now.
|
02-16-2014, 01:19 AM | #6 | |
Account Suspended
Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011
Location: Oxnard. CA
Posts: 1,747
|
Quote:
|
|
02-16-2014, 06:37 AM | #7 | |
Sellin Chevy's since '06
|
Quote:
Their rear trailing arm and Tie Rod package helps a bit with wheel hop too.
__________________
'19 Z06-7Speed and lowered on stock bolts
'02 Z28-Kooks true dual headers/TSP heads&cam/full suspension & Kmember sub40K orig miles. https://youtu.be/h6faSdcvNew TRADED!'17 ATS-V Coupe w/ Carbon Black pkg https://youtu.be/GH_t-R-TJV0 SOLD! '18 ZL1 Mosiac Blk SOLD!'16 SS Sedan-Forgestars/ARH/rotofab TRADED!2014 SS Sedan SOLD! 2013 Blue Ray1SS/1LE 1of20. TRADED! 2012 White 1SS/RS |
|
02-16-2014, 08:32 AM | #8 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
I've heard the Ridetech Coil overs are really nice and they're about $600 cheaper.
Might want to check them out? |
02-16-2014, 11:21 AM | #9 |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
I'm taking care of these problems now. I decided to go with basically the Pedders formula though. I'm adding a makeshift Permagrin Kit. I got one of the last rear bars from Summit Racing and I bought some Whiteline Bushings from Phastek they (Whiteline) make the Pedders bushings. I got the front radius bushings (don't do anything for wheel hop) and the rear cradle bushings for roughly $200 shipped. There are some videos out there that Pete posted that look very similar to the performance of the Pfadt solid bushings. Also remember the 1LE comes with ZL1 trailering arms which are a substantial upgrade to the standard pieces. While all of this isn't as substantial as the Pfadt parts it's a hell of a lot cheaper.
As for the Pfadt Coil Overs I recently talked to them and they told me the Featherlight's are the way to go. The GMPP version is more "Show than Go" http://store.pfadtracing.com/2010-ca...-street-track/ The Ridetechs do look promising but somehow for a couple hundred more (once you use Camaro5 discounts most vendors offer) they give me a more warm and fuzzy feeling. Also note the Pfadts are 6-8 weeks out. My wallet is at least that far out too though. lol Research the two and come to your own conclusion. Also if you read this thread it goes over the 1LE suspension in a little more detail and also has the vids I mentioned... http://www.camaro5.com/forums/showthread.php?t=285242
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
02-16-2014, 12:33 PM | #10 |
Account Suspended
Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011
Location: Oxnard. CA
Posts: 1,747
|
|
02-16-2014, 12:35 PM | #11 | |
Account Suspended
Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011
Location: Oxnard. CA
Posts: 1,747
|
Quote:
You touched the point that I was very interested in. I checked the Featherlight which had great features and were at least $400 cheaper. Why will they be better than the GMPP? Also do we really get a discount as forum members? |
|
02-16-2014, 01:54 PM | #12 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
|
02-16-2014, 02:20 PM | #13 |
Drives: 2013 2SS 1LE Track Ready Join Date: Dec 2013
Location: Rochester, NY
Posts: 57
|
Just completed a complete Pfadt race suspension system for the track. They had the most complete set on the market. Did a ton of reserach and chose Pfadt.
Did a Pedders system on my G8 GXP a couple of years ago but wanted to try a different system. Had less than one track day to try things out so I really don't have much to report about handling. Some pics of the upgrades: |
02-16-2014, 03:03 PM | #14 | |
Account Suspended
Drives: 2013 Camaro 2SS RS 1LE IMO Turbo Join Date: Jan 2011
Location: Oxnard. CA
Posts: 1,747
|
Quote:
Damn I can Definetly say I'm jealous. How much for all those parts!???? What exactly did u get ? I can see the coilovers but which ones did u get? How much did u get them for!? I also noticed the solid subframe bushings and the rear trailing arms and rear tie rods!? Did u notice any harsh ride or any noise? Also do u need to drop the rear cradle to do all the suspension work? |
|
|
|
|
|