2010-13 Camaro Afterburner Installation under $60 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CDWALKER25U · 02-03-2014, 09:50 PM

I installed my afterburner taillights this weekend on 2011.They came out great! It took me about 5 hours. 3 of those hours was just waiting on the silicone to dry. I ordered my lights through Amazon for only $49.99. Most vendors have them for over $200. The instructions are step by step. The hardest part for me was actually cutting on my lights. I was a little nervous at first, but it got easier over time. All you need for the installation are the lights, one tube of clear RTV silicone, 10mm wrench, dremel or similar cutting device, electrical tape and painters tape. Mine are my actual driving lights if I turn on the parking or head lights. The turn signals and brake lights still work as it did from the factory. The time is well worth it. What do you think?

AndrewMinhas · 02-27-2014, 05:56 PM

they look great. I'm about to do mine but do you have to cut the lights open?

CDWALKER25U · 02-27-2014, 06:11 PM

Quote:

Originally Posted by AndrewMinhas

they look great. I'm about to do mine but do you have to cut the lights open?

Yes you do. You are going to be nervous. If you send me a private message, I'll give you my number and I will walk you through the process.

TeelsBlack · 02-28-2014, 08:56 AM

have a link for a quick find?

CDWALKER25U · 02-28-2014, 09:17 AM

I have the 10 page instructions, but it won't upload for some reason. Send me your email and I will forward it to you.

Chris_956 · 03-03-2014, 12:53 PM

Do you need resistors? I received the smd from eBay, but I'm having trouble with the wiring. Help

CDWALKER25U · 03-03-2014, 12:59 PM

No resistors are needed.

verboten · 03-11-2014, 10:42 AM

Stingray Plasma Version?

christate1 · 03-14-2014, 02:41 PM

im gonna install mine tonight. im gonna try to get a video of it and some pics of the install.

pyledrivr · 03-15-2014, 09:10 PM

Quote:

Originally Posted by CDWALKER25U

Yes you do. You are going to be nervous. If you send me a private message, I'll give you my number and I will walk you through the process.

Planning on doing mine soon....just curious as to what wires you attached to what on the car since there are three wires attached to the lights...
I would appreciate any help you could offer

CDWALKER25U · 03-15-2014, 09:12 PM

Send me a private message with your email. I will send you the instructions.

CDWALKER25U · 03-17-2014, 10:50 AM

Quote:

Originally Posted by pyledrivr

Planning on doing mine soon....just curious as to what wires you attached to what on the car since there are three wires attached to the lights...
I would appreciate any help you could offer

Pyledrivr.......I just sent you and email with the instructions.

pyledrivr · 03-22-2014, 07:03 PM

Finished mine this weekend was a little nervous at first ...look great

verboten · 04-01-2014, 09:49 PM

Pics?

View Poll Results: Would you do this project yourself or pay someone?
Do it yourself	49	76.56%
Pay someone	15	23.44%
Voters: 64. You may not vote on this poll

02-03-2014, 09:50 PM	#1
CDWALKER25U Drives: 2011 CAMARO LS Join Date: Feb 2013 Location: Deridder, Louisiana Posts: 26 View My Garage	2010-13 Camaro Afterburner Installation under $60 I installed my afterburner taillights this weekend on 2011.They came out great! It took me about 5 hours. 3 of those hours was just waiting on the silicone to dry. I ordered my lights through Amazon for only $49.99. Most vendors have them for over $200. The instructions are step by step. The hardest part for me was actually cutting on my lights. I was a little nervous at first, but it got easier over time. All you need for the installation are the lights, one tube of clear RTV silicone, 10mm wrench, dremel or similar cutting device, electrical tape and painters tape. Mine are my actual driving lights if I turn on the parking or head lights. The turn signals and brake lights still work as it did from the factory. The time is well worth it. What do you think? Attached Images Last edited by CDWALKER25U; 09-22-2014 at 09:40 AM.

02-27-2014, 05:56 PM	#2
AndrewMinhas Drives: 2014 1LE Join Date: Jul 2013 Location: Fort Lauderdale Posts: 113 View My Garage	they look great. I'm about to do mine but do you have to cut the lights open? __________________

03-11-2014, 10:42 AM	#8
verboten Drives: Black Join Date: Jan 2010 Location: Chicago Posts: 562	Are these available? Stingray Plasma Version? Attached Images

03-22-2014, 07:03 PM	#13
pyledrivr SW Drives: 2011 Camaro Summit White Join Date: Apr 2011 Location: Southern Indiana Posts: 327 View My Garage	Finished mine this weekend was a little nervous at first ...look great __________________ 2011 Summit White LS pyledrivr@hotmail.com

02-28-2014, 08:56 AM	#4
TeelsBlack Drives: 2013 Black-on-Black 2SS/RS Join Date: Jan 2014 Location: Williamsport, PA Posts: 128	have a link for a quick find?

02-28-2014, 09:17 AM	#5
CDWALKER25U Drives: 2011 CAMARO LS Join Date: Feb 2013 Location: Deridder, Louisiana Posts: 26 View My Garage	I have the 10 page instructions, but it won't upload for some reason. Send me your email and I will forward it to you.

03-03-2014, 12:53 PM	#6
Chris_956 Drives: Imperial Blue RS Join Date: Mar 2014 Location: Texas Posts: 1	Do you need resistors? I received the smd from eBay, but I'm having trouble with the wiring. Help

03-03-2014, 12:59 PM	#7
CDWALKER25U Drives: 2011 CAMARO LS Join Date: Feb 2013 Location: Deridder, Louisiana Posts: 26 View My Garage	No resistors are needed.

03-14-2014, 02:41 PM	#9
christate1 Drives: 2013 Black ZL1 Convertible 6spd Join Date: Feb 2014 Location: Charleston, WV Posts: 63	im gonna install mine tonight. im gonna try to get a video of it and some pics of the install.

03-15-2014, 09:12 PM	#11
CDWALKER25U Drives: 2011 CAMARO LS Join Date: Feb 2013 Location: Deridder, Louisiana Posts: 26 View My Garage	Send me a private message with your email. I will send you the instructions.

04-01-2014, 09:49 PM	#14
verboten Drives: Black Join Date: Jan 2010 Location: Chicago Posts: 562	Pics?