2014 RS Fog Light LED Replacement - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

El Rey · 03-23-2014, 02:46 AM

Hello Peoples. I coudn't find a tutorial on how to replace the fog lights on 2014 cars with the rs package.

First thing you should know is the replacement lamp size is h11.

UPDATE: I no longer have am using LED's
I replaced them with 35 watt 10,000k HID's by Xentec. These new lights look fantastic and are way brighter than the Halogen or LED's.
Install instructions for HID's are the same.

You will need a torx bit T20 and a socket wrench 7mm socket.

1. Turn the wheel of the side you are working on all the way towards the inside of the car. This will make it easy to get to the three torx screws that you must remove first.

El Rey · 03-23-2014, 02:48 AM

2. Under the car there are two 7mm bolts you must remove. The are behind the air dam.

El Rey · 03-23-2014, 02:54 AM

3. Pull plastic towards the wheel to expose the lamp fixture.

4. Twist the lamp fixture counterclockwise and pull straight out.

5. Pull the old lamp on and replace with new LED one.

6. Replace fixture into it's housing.

7. Test

8. Replace all screws and bolts and repeat on opposite side

El Rey · 03-23-2014, 02:58 AM

You're done!

Below is a picture of the old lamp and one of the new one installed.

If I would of changed anything I would have gone with an even brighter lamp.

El Rey · 03-23-2014, 03:00 AM

Both lights

Adrian97c · 03-23-2014, 11:23 AM

Great write up!

As far as going brighter what h11 bulbs you recommend that would be brighter than the ones you got?

Sent from my iPhone using Tapatalk

El Rey · 03-23-2014, 11:47 AM

I can't really recommend any others because I have not used them. But I would look for something with a 60 watt led

Adrian97c · 03-23-2014, 11:51 AM

Could u make a YouTube link? I'd like to see them in action.. I think they look just as bright as stock. I know halogen throws further

Sent from my iPhone using Tapatalk

El Rey · 03-23-2014, 01:36 PM

No I don't use have good camera equipment and I don't really upload to youtube. The upgrade is worth it to me. Just to get rid of those ugly yellow lights.

Adrian97c · 03-23-2014, 01:43 PM

Quote:

Originally Posted by El Rey

No I don't use have good camera equipment and I don't really upload to youtube. The upgrade is worth it to me. Just to get rid of those ugly yellow lights.

Couldn't agree with you more!

Sent from my iPhone using Tapatalk

rey · 03-25-2014, 01:43 PM

Great write up! I'll buy the 60W ones and I'll report back on them!

Adrian97c · 03-25-2014, 01:45 PM

Quote:

Originally Posted by rey

Great write up! I'll buy the 60W ones and I'll report back on them!

Thx Rey.. I'll wait for your feedback

Sent from my iPhone using Tapatalk

Macina · 03-25-2014, 06:21 PM

Is these the same fog lights that i should buy to my 2014 2ss/rs?

El Rey · 03-25-2014, 09:53 PM

Quote:

Originally Posted by Macina

Is these the same fog lights that i should buy to my 2014 2ss/rs?

Yes. As long as it is a 2014 with an rs package these will be your lights

03-23-2014, 02:46 AM	#1
El Rey Drives: 2014 Blua Ray Metallic 1lt RS Join Date: Mar 2014 Location: Las Vegas NV Posts: 57	2014 RS Fog Light LED Replacement Hello Peoples. I coudn't find a tutorial on how to replace the fog lights on 2014 cars with the rs package. First thing you should know is the replacement lamp size is h11. UPDATE: I no longer have am using LED's I replaced them with 35 watt 10,000k HID's by Xentec. These new lights look fantastic and are way brighter than the Halogen or LED's. Install instructions for HID's are the same. You will need a torx bit T20 and a socket wrench 7mm socket. 1. Turn the wheel of the side you are working on all the way towards the inside of the car. This will make it easy to get to the three torx screws that you must remove first. Attached Images __________________ Last edited by El Rey; 04-07-2014 at 12:57 AM. Reason: Chaged from LED's to HID

03-23-2014, 02:48 AM	#2
El Rey Drives: 2014 Blua Ray Metallic 1lt RS Join Date: Mar 2014 Location: Las Vegas NV Posts: 57	2. Under the car there are two 7mm bolts you must remove. The are behind the air dam. Attached Images __________________

03-23-2014, 02:54 AM	#3
El Rey Drives: 2014 Blua Ray Metallic 1lt RS Join Date: Mar 2014 Location: Las Vegas NV Posts: 57	3. Pull plastic towards the wheel to expose the lamp fixture. 4. Twist the lamp fixture counterclockwise and pull straight out. 5. Pull the old lamp on and replace with new LED one. 6. Replace fixture into it's housing. 7. Test 8. Replace all screws and bolts and repeat on opposite side Attached Images __________________

03-23-2014, 02:58 AM	#4
El Rey Drives: 2014 Blua Ray Metallic 1lt RS Join Date: Mar 2014 Location: Las Vegas NV Posts: 57	You're done! Below is a picture of the old lamp and one of the new one installed. If I would of changed anything I would have gone with an even brighter lamp. Attached Images __________________

03-23-2014, 03:00 AM	#5
El Rey Drives: 2014 Blua Ray Metallic 1lt RS Join Date: Mar 2014 Location: Las Vegas NV Posts: 57	Both lights Attached Images __________________

03-23-2014, 11:23 AM	#6
Adrian97c Drives: Wife's 14' IS 250 Join Date: Mar 2014 Location: PSL, FL Posts: 2,207	Great write up! As far as going brighter what h11 bulbs you recommend that would be brighter than the ones you got? Sent from my iPhone using Tapatalk __________________ 2016 Camaro HBM A8, 2SS, NPP, Sunroof, Kalahari Interior/kneepads, Black bowties, 56v: -11% tint all around Ordered • 2/06/16 Built on • 3/22/16 Adopted • 4/07/16 Sold on 2/05/16: 2014 Camaro SW L99, 2SS, RS, NAV, Inferno Orange Interior: -Borla ATAK catback -Range AFM delete -15% tint all around -Red LED interior bulbs -55k white Cree LED fogs -License plate LED bulb swap -12" Sub Kit, BA amp swap -Oracle ghosted LED sidemarkers

03-23-2014, 11:47 AM	#7
El Rey Drives: 2014 Blua Ray Metallic 1lt RS Join Date: Mar 2014 Location: Las Vegas NV Posts: 57	I can't really recommend any others because I have not used them. But I would look for something with a 60 watt led __________________

03-23-2014, 11:51 AM	#8
Adrian97c Drives: Wife's 14' IS 250 Join Date: Mar 2014 Location: PSL, FL Posts: 2,207	Could u make a YouTube link? I'd like to see them in action.. I think they look just as bright as stock. I know halogen throws further Sent from my iPhone using Tapatalk __________________ 2016 Camaro HBM A8, 2SS, NPP, Sunroof, Kalahari Interior/kneepads, Black bowties, 56v: -11% tint all around Ordered • 2/06/16 Built on • 3/22/16 Adopted • 4/07/16 Sold on 2/05/16: 2014 Camaro SW L99, 2SS, RS, NAV, Inferno Orange Interior: -Borla ATAK catback -Range AFM delete -15% tint all around -Red LED interior bulbs -55k white Cree LED fogs -License plate LED bulb swap -12" Sub Kit, BA amp swap -Oracle ghosted LED sidemarkers

03-23-2014, 01:36 PM	#9
El Rey Drives: 2014 Blua Ray Metallic 1lt RS Join Date: Mar 2014 Location: Las Vegas NV Posts: 57	No I don't use have good camera equipment and I don't really upload to youtube. The upgrade is worth it to me. Just to get rid of those ugly yellow lights. __________________

03-25-2014, 01:43 PM	#11
rey Drives: 2014 Camaro RS Join Date: Feb 2014 Location: Austin, Texas Posts: 89	Great write up! I'll buy the 60W ones and I'll report back on them!

03-25-2014, 06:21 PM	#13
Macina Drives: 2014 Camaro 2SS/RS 6MT AGM Join Date: Jun 2013 Location: Göteborg, Sweden Posts: 318	Is these the same fog lights that i should buy to my 2014 2ss/rs? __________________ 2014 Ashen gray 2SS/RS 6MT, Black rally stripes, Recaros, Sunroof. Mods: OBX 1.7/8" LT headers, No cats, SW retro chambered cat back, CAI inc cai, JRE Scoop, roto-fab wb relo kit, RX catch can, Vmax ported TB, 1LE steering wheel, 1LE shift knob/boot, SCT tuner, Anthracite plasti dipped wheels, Apex/Pfadt 1.25" lowering springs. Last edited by Macina; 03-25-2014 at 06:39 PM.