![]() |
|
|
#1 |
![]() Drives: 2012 silver Camaro 2LT RS V6 Join Date: Nov 2011
Location: Valencia,ca
Posts: 132
|
"Engine Power Reduced"/"Service Stabilitrack"
Hello fellow Camaro family!
So, i have a 2012 2Lt RS Camaro; Today, i had just gotten off the freeway, made a few stops, stopped to get gas, and when i returned home, the moment i put my car in park, the dashboard came up saying 'Engine Power Reduced' and 'Servie Stabilitrack' I turned off the car, turned it on again and it said the same thing; so i did it again and this time only the check engine light was on.. i am taking it to the dealership in the morning but curious if anyone has had similar issues, what the results/solutions were, or what causes this? Thanks!!
__________________
|
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() Drives: 2013 Camaro Dusk 2SS/6 Join Date: Sep 2013
Location: New Jersey
Posts: 1,586
|
this seems to be a fairly common problem. I know you get the Reduced Power mode if there is a connection issue with the throttle body. if you can, jiggle the connector on the throttle body. if problem goes away, that's probably the cause.
|
|
|
|
|
|
#3 | |
![]() Drives: 2012 silver Camaro 2LT RS V6 Join Date: Nov 2011
Location: Valencia,ca
Posts: 132
|
Quote:
i just dropped it off at the dealership, we'll see what the issue is this morning too my remote start wouldn't work either;; lights would flash as usual before the engine would start, then nothing
__________________
|
|
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013
Location: Falls Church, Virginia
Posts: 3,600
|
After installing my catch can, i forgot one of the electrical connectors. i had pulled it in order to fit my hand to where the catch can hooked up.
Went away after reconecting the electrical conector. I hope that's all it is for you
__________________
"You simply cannot trust quotes found on the internet." -Abraham Lincoln
|
|
|
|
|
|
#5 |
![]() Drives: Blue Ray 2SS Join Date: Jul 2013
Location: Elyria
Posts: 262
|
Whenever the SES light is on the remote start will not work, it's just like when the hood is open, it won't work either. I'm sure it's something simple like the throttle position sensor or may an ECM update.
Paul |
|
|
|
|
|
#6 |
![]() Drives: 2012 silver Camaro 2LT RS V6 Join Date: Nov 2011
Location: Valencia,ca
Posts: 132
|
Alright all, after only 3 hours dealership called me back and said my car was fixed! All it was was something with the sensors out of calibration so they just had to reprogram it! nothing serious and have my beast back!
__________________
|
|
|
|
|
|
#7 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,327
|
Quote:
Thanks for posting your update. Feel free to contact us privately if there are any future concerns that you encounter. Kind regards, William R. Chevrolet Customer Care |
|
|
|
|
|
|
#8 | |
![]() Drives: 2012 silver Camaro 2LT RS V6 Join Date: Nov 2011
Location: Valencia,ca
Posts: 132
|
Quote:
Thank You too! I'll be sure to come in contact with Chevy Customer Service!
__________________
|
|
|
|
|
|
|
#9 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,327
|
|
|
|
|
|
|
|
|
![]() |
|
|