Post Your 2014/2015 External Mod Pics!

[Macina]

Originally Posted by GMfan454

I think your car would look so bad a$$ if you put a ZL1 front bumper on it with the fog lights and everything. You can get them on Ebay pretty reasonably. Check the ABM officail thread and a couple of pages in from the last page, you will see a guy who did it. Looks amazing!
EDIT:
found the thread again. Very bottom of the page.
http://www.camaro5.com/forums/showth...=9958&page=273

But that would mean losing the 14's unique front...
Dont do it!

[wocampb]

Originally Posted by HerRide

Wish there was more available for the '14s. I'm ready to spend some money!

I despise my stock rear diffuser and need find a new one. Any suggestions?

Paint the rear diffuser body color, that's what I did on mine and it really improves the look of it.

[trashmanssd]

Originally Posted by HerRide

Wish there was more available for the '14s. I'm ready to spend some money!

I despise my stock rear diffuser and need find a new one. Any suggestions?

How about just get the one you have painted. I like it on the black cars but on other colors it is a little weird with the black plastic coming half way up the license plate.

[HerRide]

Do they even make the ZL1 front conversion for '14 yet?

With the diffuser, I like the ones that fully encase the tips if that makes sense (still learning so not sure the terminology!).

[2014CamaroZL1]

The ZL1 front should fit the '14 SS.

You could paint your despised diffuser.
Black like the Z28 or body color.
Given the AGM, a black diffuser and splitter would look great.

I am thinking of painting my ground effects.
Not certain about color, though.
I don't like black or body color, so maybe a dark grey.

[fussboss]

Loving this... I need to take pics of mine..

[thkfast]

Originally Posted by HerRide

@daspes - looks killer!

Hey Mike! Thanks so much! The hashes are a satin finish to match the hood vents. My wrap guy started with matte but there were just too many finishes going on and I didn't want them in the carbon fiber.

Post pics of your project when you are done if you don't mind - sounds cool! I'm going to paint my calipers but not sure what color yet. I'm getting the car wrapped soon so it will probably depend on that but I'm leaning toward yellow. =)

Yellow calipers would really pop! I've also seen blue calipers like this on AGM and they really look good.

Dang, that's a big picture!

[DefiantXSoldier]

Originally Posted by daspes

Blacked out the headlight area on the front fascia.




Sent from my iPhone using Tapatalk

First off let me say you have awesome taste and skill with vinyl. I am currently waiting on my Red Hot 1LE from the factory.

The day I ordered it I went home and started ordering everything I could think of that would set my car apart from anyone else's. Blackout tint for all lights and matte BLK gills from BigWorm. A huge roll of matte black vinyl for the bow ties and all the chrome. Color matched GM hood scoop from RPIdesigns. ZL1 splash guards from RPIdesigns. Matte Black hash marks. Black Gorilla lugs (removed from my 2010 SS)

Someone in another post I listed linked me to this post and I'm just amazed by how similar my taste is to yours. I will be and have previously planned to do almost all of the same mods to my Red Hot 1LE. I just have to ask though...how are you cutting the vinyl around the headlights, mirrors, and side skirts without cutting into the clear coat and paint?

The other mod I plan on doing that you haven't done yet is the ZL1 rockers. But since we have similar tastes, I'm sure you will be adding those soon enough.


Sent from my iPad using Tapatalk

[Kangaroo]

Thought the HotWheels theme they did was lame so I did my own.

[thkfast]

Originally Posted by Kangaroo

Thought the HotWheels theme they did was lane so I did my own.

That's so cool man!

[daspes]

Originally Posted by DefiantXSoldier

First off let me say you have awesome taste and skill with vinyl. I am currently waiting on my Red Hot 1LE from the factory.

The day I ordered it I went home and started ordering everything I could think of that would set my car apart from anyone else's. Blackout tint for all lights and matte BLK gills from BigWorm. A huge roll of matte black vinyl for the bow ties and all the chrome. Color matched GM hood scoop from RPIdesigns. ZL1 splash guards from RPIdesigns. Matte Black hash marks. Black Gorilla lugs (removed from my 2010 SS)

Someone in another post I listed linked me to this post and I'm just amazed by how similar my taste is to yours. I will be and have previously planned to do almost all of the same mods to my Red Hot 1LE. I just have to ask though...how are you cutting the vinyl around the headlights, mirrors, and side skirts without cutting into the clear coat and paint?

The other mod I plan on doing that you haven't done yet is the ZL1 rockers. But since we have similar tastes, I'm sure you will be adding those soon enough.


Sent from my iPad using Tapatalk

Squeegee, heat gun and razor blade... And a steady hand. It doesn't take much pressure to cut through the vinyl. U learn over time how much is required.

If your unsure of your ability. Grab a roll if masking tape and completely cover the area you are going to wrap. Use a marker to trace the outline of any curves and cuts you have to make. Then pull off the tape. Trim up your cut lines and you have a template you can transfer to your vinyl. Trim it up then apply to the car.


Sent from my iPhone using Tapatalk

[DefiantXSoldier]

Thanks for the great advice. I will try this later on today


Sent from my iPad using Tapatalk

[HerRide]

Got her lowered 1"!

It's funny to look at a pic of the day I brought her home to now. And I thought I loved here then...

[All.Black.Everything]

Looks great! I've got my springs sitting at home waiting to get put on.

Sent from my SAMSUNG-SM-N900A using Tapatalk