New catch can from Apex Motorsports - Page 22 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RLHMARINES · 04-04-2014, 06:15 PM

This is what I found today in my Apex Catch Can after just 1 week in use.

ckosiek · 04-08-2014, 10:46 AM

[QUOTE=Apex Chase;7550560]PM on the way.

Nothing received as of today......

Z4me · 04-08-2014, 02:15 PM

Just ordered mine with the black nylon hose and the chrome connectors. Replacing my RX catch can. Called thier office before ordering and found out that they are
currently out of stock. But they should be shipping out more in like ten days to two
weeks time. Waiting is no problem for me, they look like a great product.

Apex Motorsports · 04-08-2014, 04:57 PM

Quote:

Originally Posted by ckosiek

Nothing received as of today......

Not sure what the question was. Feel free to send me a PM or give us a call.

Quote:

Originally Posted by Z4me

Just ordered mine with the black nylon hose and the chrome connectors. Replacing my RX catch can. Called thier office before ordering and found out that they are
currently out of stock. But they should be shipping out more in like ten days to two
weeks time. Waiting is no problem for me, they look like a great product.

Thank you for your order. We ran through that last production run faster than we could finish the next but they are just about ready to go.

ckosiek · 04-11-2014, 04:04 PM

Chase,

Check post #294.....

nxttruck2002 · 04-11-2014, 04:08 PM

What can i do to prevent my allen screws from rusting before I do my install?

ckosiek · 04-11-2014, 05:07 PM

Not sure if this is an issue with anyone else.

Apex Motorsports · 04-11-2014, 08:36 PM

Quote:

Originally Posted by nxttruck2002

What can i do to prevent my allen screws from rusting before I do my install?

Quote:

Originally Posted by ckosiek

Not sure if this is an issue with anyone else.

That is the first case of that I has seen and I don't have an explanation for why that would have happened. If you would like for us to send you a new set just give us a call.

RLHMARINES · 04-12-2014, 12:23 AM

Quote:

Originally Posted by Apex Chase

That is the first case of that I has seen and I don't have an explanation for why that would have happened. If you would like for us to send you a new set just give us a call.

I noticed today that my screws are also developing some surface rust. But I can honestly say that this has been the best mod that I've done to date due to all the excessive oil that it has captured since my install.

ckosiek · 04-12-2014, 09:11 AM

Agreed, rather see that oil in the can than back into the intake.

Apex Motorsports · 04-15-2014, 10:39 AM

Quote:

Originally Posted by ckosiek

Agreed, rather see that oil in the can than back into the intake.

Amen

cdjnight · 04-15-2014, 09:18 PM

Quote:

Originally Posted by ckosiek

Agreed, rather see that oil in the can than back into the intake.

These are black oxide cap screws they're gonna rust unless you paint them, I used black touch up paint on mine after I installed them...or button heads I can't remember the style...

Chad's ZL1 · 04-15-2014, 11:03 PM

Are the braided lines cut to length? I have a 2014 zl1

BumblebeeQ8 · 04-16-2014, 02:03 PM

Is the catch can available ?

04-04-2014, 06:15 PM	#295
RLHMARINES 1st Civ. Div. Drives: Camaroless for now...RIP "Big SexZ" Join Date: Dec 2007 Location: Savannah, Ga Posts: 2,729	This is what I found today in my Apex Catch Can after just 1 week in use. Attached Images __________________ Swift....Silent....Deadly

04-08-2014, 02:15 PM	#297
Z4me Drives: 2013 ZL1 IOM Vin #169 Join Date: Jan 2011 Location: Maryland Posts: 1,953	Just ordered mine with the black nylon hose and the chrome connectors. Replacing my RX catch can. Called thier office before ordering and found out that they are currently out of stock. But they should be shipping out more in like ten days to two weeks time. Waiting is no problem for me, they look like a great product. __________________

04-08-2014, 10:46 AM	#296
ckosiek Drives: Former owner 2013 ZL1 Convertible Join Date: Oct 2013 Location: Delaware Posts: 72	[QUOTE=Apex Chase;7550560]PM on the way. Nothing received as of today......

04-11-2014, 04:04 PM	#299
ckosiek Drives: Former owner 2013 ZL1 Convertible Join Date: Oct 2013 Location: Delaware Posts: 72	Chase, Check post #294.....

04-11-2014, 04:08 PM	#300
nxttruck2002 Drives: Camaro Join Date: Aug 2013 Location: Cali Posts: 200	What can i do to prevent my allen screws from rusting before I do my install?

04-11-2014, 05:07 PM	#301
ckosiek Drives: Former owner 2013 ZL1 Convertible Join Date: Oct 2013 Location: Delaware Posts: 72	Not sure if this is an issue with anyone else.

04-12-2014, 09:11 AM	#304
ckosiek Drives: Former owner 2013 ZL1 Convertible Join Date: Oct 2013 Location: Delaware Posts: 72	Agreed, rather see that oil in the can than back into the intake.

04-15-2014, 11:03 PM	#307
Chad's ZL1 THERAPY Drives: Red Rock Metallic ZL1 Join Date: Nov 2009 Location: Roseville Posts: 1,440 View My Garage	Are the braided lines cut to length? I have a 2014 zl1

04-16-2014, 02:03 PM	#308
BumblebeeQ8 Drives: '14 ZL1 Ashen Gray Metallic Join Date: Dec 2009 Location: Kuwait Posts: 191	Is the catch can available ?