New SLP Style Splitter Install (cheap)

[BluePhoenix]

Originally Posted by Awdition

I painted mine as follows:

1. Scrotchbrite it
2. Plastic Adhesion promoter
3. primer with flex agent x 3 coats
4. 800 grit wet sand in order to take out any bumps
5. Bumper Coater black paint (matte) 3 x coats

Holds up very well - even after scrapes.

Thanks for the info. I know I'm going to want mine painted Matte Black or as much as I think I dislike Plasti-dip, maybe plasti-dipped.

[camarohead]

Originally Posted by OmniCamaro

It's still there. Search for seller excessmotors, front lip spoiler. That's where I got mine.

Thx

[mikerogs]

That seller (excessmotors) no longer exists.

And the other sellers all say $195 now. Is the $149 deal over?


Also, is the underside perfectly flat? If I do this I have to mount a hide-a-plate under it, and I am not sure if it will fit or if there is room.

[IcedBee]

I just received mine yesterday and I must say... it's quite disappointing. The top looks really good but the underneath looks like a kid played with plastic

That's why i will just sell it and order a SLP or ACS T4 for 100 Bucks more but with much better quality.

[IcedBee]

do you have the same structure and surface on the underneath of it?

[TwentyTen2SSRS]

Mine is great! I got in at 145 deal and held up great on daily driver in Washington state. I used self tapping screws and they've held great. when I take my front end off this weekend I'll secure down further with nuts and repaint with plasti dip


Sent from my iPhone using Tapatalk 2

[TwentyTen2SSRS]

Mine ripped off today after my CAI scoop install going about 80. No bueno on self tapping screwsZ tank god on a back road.

Very durable it flew to side of street and still in perfect condition lol.

Going to rivet in this time


Sent from my iPhone using Tapatalk 2

[justjoshin]

These are all selling for $195 on ebay now and the SLP is $285. Do you think it is still a good deal at this price? Do these come with the holes pre-drilled in the splitter?

[justjoshin]

in case anyone is looking for one, i found this:

http://www.newegg.com/Product/Produc...9SIA0VR16K3191

[shibbs]

Originally Posted by TwentyTen2SSRS

Mine ripped off today after my CAI scoop install going about 80. No bueno on self tapping screwsZ tank god on a back road.

Very durable it flew to side of street and still in perfect condition lol.

Going to rivet in this time


Sent from my iPhone using Tapatalk 2

Drill holes, use bolts with large washers. It's a pain, but it won't fly off. Mine's tested to well above 120.

Originally Posted by justjoshin

These are all selling for $195 on ebay now and the SLP is $285. Do you think it is still a good deal at this price? Do these come with the holes pre-drilled in the splitter?

If it's like mine, (which your Newegg link looked exactly like) it'll come with dimples where you should drill.

[Deltasig]

Originally Posted by SS785

If possible, could someone post a picture of the splitter from underneath? I'd just like see how it bolts up and how far back it goes into the bumper.

Same here. I would like to see how it bolts up and how far back it goes. Anyone have a picture?

[justjoshin]

Originally Posted by Deltasig

Same here. I would like to see how it bolts up and how far back it goes. Anyone have a picture?

Just installed, will try to get a picture tomorrow.

[justjoshin]

Originally Posted by shibbs

Drill holes, use bolts with large washers. It's a pain, but it won't fly off. Mine's tested to well above 120.


If it's like mine, (which your Newegg link looked exactly like) it'll come with dimples where you should drill.

Yes the same one with the dimples. The seller removed from Newegg, but same seller is on ebay for $195. I think he forgot about the listing on Newegg....score!

[justjoshin]

Found a picture in another thread but I will get some photos tomorrow.

http://www.camaro5.com/forums/showpo...&postcount=179