What if I told you that all Pfadt parts were not gone for good?

[Lio Martinez]

Originally Posted by Apex Chase

Those WILL be making a return. Just hang in there.

Chase I'm curious to know the Sway bars you guys will sell will they be the same design as the Pfadt ZL spec ones!?

I had bought me a set for my project, but damn UPS lost the package just a day before I got them. So pretty much it looks like I'll have to find a new alternative.

Ok so I also got a Set of the Pfadt Front sway bar end links . Will those still work with the sway bars you are planning to make and sell!?

[Powhusku]

Originally Posted by Apex Chase

Those WILL be making a return. Just hang in there.

[Apex Motorsports]

Originally Posted by Lio Martinez

Chase I'm curious to know the Sway bars you guys will sell will they be the same design as the Pfadt ZL spec ones!?

I had bought me a set for my project, but damn UPS lost the package just a day before I got them. So pretty much it looks like I'll have to find a new alternative.

Ok so I also got a Set of the Pfadt Front sway bar end links . Will those still work with the sway bars you are planning to make and sell!?

Yes, they will be completely unchanged. You should have no problems using the Pfadt end inks.

[Lio Martinez]

Originally Posted by Apex Chase

Yes, they will be completely unchanged. You should have no problems using the Pfadt end inks.

Please message me as SIMM as they are out? Will they take months to be out?

[bannonm]

Originally Posted by Lio Martinez

Ok so I also got a Set of the Pfadt Front sway bar end links . Will those still work with the sway bars you are planning to make and sell!?

Originally Posted by Apex Chase

Yes, they will be completely unchanged. You should have no problems using the Pfadt end inks.

Not completely true. Lio, if you got a hold of a set that were for the earlier Pfadt racing sways, they will have the 10mm heim joint on both ends. For the ZL Spec sway you need the 12mm thread. The bar uses the 12mm hole like the ZL1 does. The end links that came with the ZL1 Spec bars had 10mm on one end and 12mm on the other. The 10mm hole is for attaching to the strut. The ZL1 end links are 12mm on both ends and some guys just drill the strut hole larger. I believe you have the Pfadt coil overs so you have the 10mm hole.

Other than the heim joint thread size they are the same.

[Lio Martinez]

Originally Posted by bannonm

Not completely true. Lio, if you got a hold of a set that were for the earlier Pfadt racing sways, they will have the 10mm heim joint on both ends. For the ZL Spec sway you need the 12mm thread. The bar uses the 12mm hole like the ZL1 does. The end links that came with the ZL1 Spec bars had 10mm on one end and 12mm on the other. The 10mm hole is for attaching to the strut. The ZL1 end links are 12mm on both ends and some guys just drill the strut hole larger. I believe you have the Pfadt coil overs so you have the 10mm hole.

Other than the heim joint thread size they are the same.

The box and instructions said they were the Pfadt front end links for the ZL spec sway bars

It this ones. But just the fronts

http://www.pfadtracing.com/blog/wp-c...ks-Rev-3.2.pdf

[bannonm]

Originally Posted by Lio Martinez

The box and instructions said they were the Pfadt front end links for the ZL spec sway bars

It this ones. But just the fronts

http://www.pfadtracing.com/blog/wp-c...ks-Rev-3.2.pdf

You are fine then. I didn't know if you bought those used or new from someone.

[Lio Martinez]

Originally Posted by bannonm

You are fine then. I didn't know if you bought those used or new from someone.

I bought the last set from JDP 3 weeks ago. Brand new for $100 shipped and the only bad thing is that is only the front ones. What can I do for the rear ones?

Any recommendations or will stick rear ones work !?

[CHMSC]

Originally Posted by Lio Martinez

I bought the last set from JDP 3 weeks ago. Brand new for $100 shipped and the only bad thing is that is only the front ones. What can I do for the rear ones?

Any recommendations or will stick rear ones work !?

You don't need the rears. Only the FE3's do. You are good to go when you do get the sways.

[Lio Martinez]

Originally Posted by CHMSC

You don't need the rears. Only the FE3's do. You are good to go when you do get the sways.

Great I just have to see if UPS finally funds the lost package. Or wait for Apex to develop theirs so that I can buy them from them

[Jeff_SS]

Got my springs yesterday! Can't wait to install.

[Apex Motorsports]

Originally Posted by Jeff_SS

Got my springs yesterday! Can't wait to install.

Thank you for your order. Be sure to post some pictures after you get them installed.

[Lio Martinez]

Originally Posted by Apex Chase

Thank you for your order. Be sure to post some pictures after you get them installed.

Any idea of how long until the ZL spec sway bars??? just so we get a basic idea.

[Lio Martinez]

Originally Posted by Jeff_SS

Got my springs yesterday! Can't wait to install.

That's is bad ass man. They still have the Pfadt Logo . Good luck with the install