FEELER: Built differential center section with drive shaft - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SStealth Vert · 04-22-2014, 11:48 PM

So I'm researching a new differential but before I pull the trigger, I'd like to get an idea of what my current setup could be worth. So, here's how it is. The center is built with the Eaton TruTrac differential, JRE cap, and LPW diff cover with BMR poly bushings using 3:45 gears. The drive shaft is a DSS aluminum made for an M6. Like I said I'm trying to get a feel for what could be offered.

olblue75 · 04-23-2014, 01:57 PM

I'd say the diff by itself is worth 600 (I've seen them go between 500 to 750).
The bushing maybe 50 again there used.
The tru trac another 400 to 500 since used but maybe a little more since already installed.
The DS new is like 900 but used I'd say 750 to 850.
Caps an cover not really sure but I'd say another 400 to 500.
Going to be real hard to recoupe the labor cost I would think.
An all of this is just a estimate an not including any shipment.
I'd say if your a motivated seller an you need it gone 2k plus shipping would be a smoking deal an a fair price for used parts.
An all of this is only my opinion.
GLWS!!!

Indyblue98 · 04-28-2014, 02:42 PM

http://www.camaro5.com/forums/showthread.php?t=337313

I missed this one a couple months back .

$1300.00 no shipping charges.
No Driveshaft included at that price.

Ron_Robinson1 · 04-28-2014, 04:27 PM

$1500 and I come pick it up when you take it off.

PM if your really plan on selling it all.

04-22-2014, 11:48 PM	#1
SStealth Vert Banned Drives: '11 Vert M6 Join Date: Mar 2014 Location: Here and there, but mainly NJ Posts: 61	FEELER: Built differential center section with drive shaft So I'm researching a new differential but before I pull the trigger, I'd like to get an idea of what my current setup could be worth. So, here's how it is. The center is built with the Eaton TruTrac differential, JRE cap, and LPW diff cover with BMR poly bushings using 3:45 gears. The drive shaft is a DSS aluminum made for an M6. Like I said I'm trying to get a feel for what could be offered. Last edited by SStealth Vert; 04-23-2014 at 12:29 AM.

04-28-2014, 02:42 PM	#3
Indyblue98 2012 RS 2ss Drives: 2018 ZL1 2012 2SS WhippleCharged Join Date: Feb 2012 Location: Kansas Posts: 414	Diff http://www.camaro5.com/forums/showthread.php?t=337313 I missed this one a couple months back . $1300.00 no shipping charges. No Driveshaft included at that price. __________________ 2018 ZL1 A10 and 2012 2SS RS Whipple-Corsa-RotoFab-ZL1 Diff 3.73 Pfadt ZL Stage 3 Suspension+

04-28-2014, 04:27 PM	#4
Ron_Robinson1 Drives: A Static line to a pack tray & ZL1 Join Date: Feb 2011 Location: Centeral NY Posts: 2,277	$1500 and I come pick it up when you take it off. PM if your really plan on selling it all. __________________ 2017 ZL1 A10: 8.84 @ 156 PB 2017 ZL1 A10: Previously FBO 756/761 (9.6 @ 143 1/4) SOLD-2013 ZL1 M6:BTR,LTs,IDs,ATI,RotoFab10.84@129 SOLD-2011 SS M6: Blower, Cam, Alky, LTs.

04-23-2014, 01:57 PM	#2
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,155	I'd say the diff by itself is worth 600 (I've seen them go between 500 to 750). The bushing maybe 50 again there used. The tru trac another 400 to 500 since used but maybe a little more since already installed. The DS new is like 900 but used I'd say 750 to 850. Caps an cover not really sure but I'd say another 400 to 500. Going to be real hard to recoupe the labor cost I would think. An all of this is just a estimate an not including any shipment. I'd say if your a motivated seller an you need it gone 2k plus shipping would be a smoking deal an a fair price for used parts. An all of this is only my opinion. GLWS!!!