Launch with torque converter - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PFL · 05-04-2014, 05:42 PM

Hi, guys

as you do to drag, with torque converter?? nannies off? or on StabiliTrak?? What is your stall torque converter, and what rpm you can drag to launch??

Thank's

Camarojt · 05-04-2014, 09:18 PM

All nannies off, I launch off of idle or slightly above idle and let the converter flash!
I have a Circle D 3600 triple disc.
Best 60ft 1.53 with only 390hp just bolt Ons.

PFL · 05-05-2014, 12:51 PM

Quote:

Originally Posted by Camarojt

All nannies off, I launch off of idle or slightly above idle and let the converter flash!
I have a Circle D 3600 triple disc.
Best 60ft 1.53 with only 390hp just bolt Ons.

I have vigilant 3600k, you have a video of your launchings drag? I let off the nanny, but I noticed a good performance with StabiliTrak turned full throttle then release. you stand at 700 or 900 rpm? I need tips to make a perfect launch in drag. thank you

05-04-2014, 05:42 PM	#1
PFL Drives: Camaro SS Join Date: Jun 2013 Location: Eua Posts: 344	Launch with torque converter Hi, guys as you do to drag, with torque converter?? nannies off? or on StabiliTrak?? What is your stall torque converter, and what rpm you can drag to launch?? Thank's

05-04-2014, 09:18 PM	#2
Camarojt Drives: 2011camaro SS Join Date: Nov 2012 Location: Allen, Tx Posts: 2,202	All nannies off, I launch off of idle or slightly above idle and let the converter flash! I have a Circle D 3600 triple disc. Best 60ft 1.53 with only 390hp just bolt Ons.