![]() |
|
|
#1 |
![]() Drives: 2010 ss cam, long tube headers,102 Join Date: Oct 2011
Location: kentucky
Posts: 25
|
rear turn signal
on the way to work this morning i had an alarm to check right rear turn signal. Got here and checked, sure enough. The outside light was not blinking but inboard one was. This happen to anyone? Is it a relay or is tail light bad?
|
|
|
|
|
|
#2 |
|
EMERALD COAST CAMAROS
Drives: None Join Date: Feb 2010
Location: Cridersvile, OHIO
Posts: 2,973
|
Since you have a 2010 and if you haven't modded the tailights I'd say a bulb is bad.
__________________
|
|
|
|
|
|
#3 |
![]() Drives: Camaro Lighting Experts Join Date: Feb 2012
Location: St. Louis, MO
Posts: 2,429
|
It's a bad bulb. When the bulb goes bad, the filament doesn't create any resistance in the circuit and that's what triggers the bulb out warning.
Since LEDs generate very little resistance, they can sometimes cause this. That's what load resistors have to be installed. A new bulb with fix the problem Nick C.
__________________
|
|
|
|
|
|
#4 |
|
SSmokinJoe
Drives: 2010 SIM 1SS/RS M6 Join Date: Feb 2010
Location: Pittsburgh, North Hills
Posts: 568
|
For some reason, I've had to change the left rear outside taillight bulb 3 times on my 2010 camaro. Right-side bulbs have been fine.
__________________
1SS/RS Silver with Black Rally Stripes.
35% Tint Roto-Fab CAI SLP Loudmouth II Axleback Hurst Shifter R1Concepts Slotted Rotors Hawk Ceramic Brakepads I drive way too fast to worry about my cholesterol. |
|
|
|
|
|
|
|
![]() |
|
|