05-18-2014, 12:17 PM | #1 |
Drives: Camaro Join Date: Aug 2013
Location: Cali
Posts: 200
|
GM installed belt incorrectly...
I don’t know what General Motors implements with regards to their QC but this ZL1 has 500 miles on it and is completely stock excluding a catch can. I know the LS9 is built here in the states while the LSA resides in Mexico. I was getting it detailed by http://www.delivery-detail.com/ and member davidcroft notified me of this. By the way, great detail crew.
This is making all sorts of contact on the lower snout and lower TB region. |
05-18-2014, 12:19 PM | #2 |
Drives: Camaro Join Date: Aug 2013
Location: Cali
Posts: 200
|
|
05-18-2014, 12:24 PM | #3 |
My ZL1 engine was made in USA.
|
|
05-18-2014, 01:04 PM | #4 |
Drives: Camaro Join Date: Aug 2013
Location: Cali
Posts: 200
|
From GM Powertrain:
http://archives.media.gm.com/us/powe...tm#60L%20id60L (click on the "SS" Spec Sheet link after the LSA for details) "2009 ""LSA"" 6.2L V-8 ( LSA )" Type: 6.2L Gen IV V-8 Small Block Displacement: 6162cc (376 ci) Compression ratio: 9.1:1 Valve configuration: overhead valves (2 valves per cylinder) Assembly site: Silao, MX |
05-18-2014, 01:31 PM | #5 |
Drives: 2013 ZL1 Ashen Gray Join Date: Oct 2013
Location: Lawrenceville,Ga
Posts: 668
|
__________________
I don't have to know everything,I just need to know,what I need to know,when I need to know it!
MODS, a lot of money,a lot of parts,a lot of time,a lot of patience. 754 RWHP 747 RWTQ 93 Octane http://www.camaro5.com/forums/showthread.php?t=347243 |
05-18-2014, 02:04 PM | #6 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,816
|
The belts are definitely a little different than the pic because that has a power steering pump like a CTSv LSA.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
05-18-2014, 02:48 PM | #7 |
Emerald Coast Camaros
Drives: 2013 ZL1 Join Date: Mar 2013
Location: Perry Florida
Posts: 30
|
The belts should be routed just like the picture of the engine. Instead of the power steering pump there is an idler pulley.
__________________
2013 Camaro ZL1 IOM M6
2006 Trailblazer SS (grocery getter) 2007 Cobalt SS/SC 2002 Camaro 35th Anniv. Conv. 1991 Camaro Z28 350 Auto 1967 Camaro SS396, M4 Conv. Highly Modified 1967 Camaro SS396, M4 Coupe 2008 Buell 1125R |
05-18-2014, 03:21 PM | #8 |
Drives: ZL1 #529 "El-Jefe" Join Date: Mar 2012
Location: Las Vegas, NV
Posts: 668
|
My LSA is USA.. Damn Americans.
|
05-18-2014, 04:42 PM | #9 |
Drives: Camaro Join Date: Aug 2013
Location: Cali
Posts: 200
|
item 1 will need to be replaced. Hopefully nothing else is messed up or damaged...
GM Part # 12641123 |
05-18-2014, 07:33 PM | #10 |
|
I was under the impression that all LSAs are made in Mexico.
|
05-18-2014, 07:37 PM | #11 |
Drives: Camaro Join Date: Aug 2013
Location: Cali
Posts: 200
|
I think they are.. I'm not sure where they're getting their information from
|
05-18-2014, 07:37 PM | #12 |
Drives: 2013 ZL1 Ashen Gray Join Date: Oct 2013
Location: Lawrenceville,Ga
Posts: 668
|
It lists where your's was made on your window sticker toward the bottom.
__________________
I don't have to know everything,I just need to know,what I need to know,when I need to know it!
MODS, a lot of money,a lot of parts,a lot of time,a lot of patience. 754 RWHP 747 RWTQ 93 Octane http://www.camaro5.com/forums/showthread.php?t=347243 |
05-18-2014, 07:47 PM | #13 |
Drives: Camaro Join Date: Aug 2013
Location: Cali
Posts: 200
|
Mexico and Canada are still north America even with NAFTA.
All GM official literature continue to state, "Sailo, Mexico" |
05-18-2014, 07:50 PM | #14 | |
Drives: 2013 ZL1 Ashen Gray Join Date: Oct 2013
Location: Lawrenceville,Ga
Posts: 668
|
Quote:
Read the bottom right side of your window sticker and you will find out where your's was built.
__________________
I don't have to know everything,I just need to know,what I need to know,when I need to know it!
MODS, a lot of money,a lot of parts,a lot of time,a lot of patience. 754 RWHP 747 RWTQ 93 Octane http://www.camaro5.com/forums/showthread.php?t=347243 |
|
|
|
|
|