Xpel Quotes. - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1BLWN/LE · 06-09-2014, 11:19 PM

Yeah when I was 6 maybe. Lol!

Sent from my SCH-I535 using Tapatalk

Skylane765 · 06-09-2014, 11:21 PM

That's right, but you can do it now! Yes it does look heard to do when you first see it done, but learn the tricks and it's not that hard. Most do not show the tricks.

1BLWN/LE · 06-09-2014, 11:23 PM

If I had to do it, then I would, just don't have the patience for film, window tinting, stitch dying, etc..

Sent from my SCH-I535 using Tapatalk

Skylane765 · 06-09-2014, 11:25 PM

Yes, your time may be better for other things. I just like a challenge.

1BLWN/LE · 06-09-2014, 11:27 PM

Hey at least were both protecting are rides, that's the important part.

Sent from my SCH-I535 using Tapatalk

EvilZL1 · 06-10-2014, 12:36 AM

Gonna look into this

Sent from my iPhone using Tapatalk

1953 C6 · 06-10-2014, 03:40 PM

Dan,
How did it turn out? I will drive to Fredericksburg to get it done right. My local guy screwed it up...
Thanks,
Frank

QUOTE=ZL1Dan;7711884]Just as a comparison, you should check out this guy's prices. He's doing my ZL1 tomorrow:

www.Proshieldinc.com

He comes highly recommended, so I know I'm getting quality work done.[/QUOTE]

1BLWN/LE · 06-10-2014, 05:23 PM

Just picked up my car. Diamond gloss, xpel ultimate film, windows tinted 25 percent back windows and 35 percent front windows. It came fantastic!

Sent from my SCH-I535 using Tapatalk

OVERPAR73 · 06-10-2014, 08:52 PM

XPel should be your very first mod!!

ghostrider2 · 06-22-2014, 04:54 PM

Quote:

Originally Posted by RedCamaroZL1

I found the prices to be high in Michigan. But I still thought it was worth doing. I had mine done by Larry at Paint Protection Plus. I am very happy with the install. He uses a plotter and didn't roll the edges. But after talking to him about it quite a bit, I was ok with doing it that way. He was extremely professional and his workshop was very clean and organized. I had another quote for similar price, but the other shop was so disorganized and messy I didn't trust it.
I did full hood, front bumper, full front fenders, headlights, mirrors, doors, and rockers. Wish I could have done the whole car, but I couldn't afford anymore than I spent. 1 year with it, still happy I did.

Red can you provide pictures since your edges weren't rolled. also of your front bumper, was it one piece? thanks

Sent from my SAMSUNG-SGH-I337 using Tapatalk

ghostrider2 · 06-22-2014, 05:02 PM

I'm pissed right now, just got done picking it up. I was with the installer arguing for 90 mins. Maybe it's me but I thought you couldn't see this on the car. He was spouse to roll the edges but said it will start to peel.....ok..... He didn't remove the badging on the framers or hood but cut around them! I was not expecting to see seems like this but he said there is nothing he can do, it's the template from xpel......I'm shoo poised I just feel like I wasted 2k!

Sent from my SAMSUNG-SGH-I337 using Tapatalk

ghostrider2 · 06-22-2014, 05:03 PM

Sent from my SAMSUNG-SGH-I337 using Tapatalk

1BLWN/LE · 06-22-2014, 05:18 PM

Nope that's how it is.. you see the film and lighter colors you really see it.
With mine it's a lot harder to notice because it's a darker color .

Sent from my SCH-I535 using Tapatalk

ghostrider2 · 06-22-2014, 05:44 PM

So I shouldn't at a level of fuming mad I just want to equip his throat out and rip this shit off?

Sent from my SAMSUNG-SGH-I337 using Tapatalk

06-09-2014, 11:27 PM	#33
1BLWN/LE Account Suspended Drives: 2013 ZL1 M6 Join Date: Mar 2014 Location: NY Posts: 362	Hey at least were both protecting are rides, that's the important part. Sent from my SCH-I535 using Tapatalk Last edited by 1BLWN/LE; 06-10-2014 at 12:37 AM.

06-10-2014, 12:36 AM	#34
EvilZL1 Snake Eater Drives: 2012 AGM ZL1 Join Date: Oct 2011 Location: TN Posts: 2,737	Gonna look into this Sent from my iPhone using Tapatalk __________________ Build Thread: http://www.camaro5.com/forums/showth...95#post8351295 Make sure you don’t forget to subscribe to my channel! More content on the way. Like, share with your friends https://www.youtube.com/channel/UC9Z...sP2wjsLLFeP1zQ Follow me on instagram: http://www.instagram.com/snkeatr/

06-10-2014, 08:52 PM	#37
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,472 View My Garage	XPel should be your very first mod!! __________________ Build Thread: 2018 ZL1 Vert Purchased (Overpar73)

06-22-2014, 05:02 PM	#39
ghostrider2 Drives: 2014 Bright Yellow ZL1 Vert/M6 Join Date: Apr 2012 Location: Spokane, Washington Posts: 551	I'm pissed right now, just got done picking it up. I was with the installer arguing for 90 mins. Maybe it's me but I thought you couldn't see this on the car. He was spouse to roll the edges but said it will start to peel.....ok..... He didn't remove the badging on the framers or hood but cut around them! I was not expecting to see seems like this but he said there is nothing he can do, it's the template from xpel......I'm shoo poised I just feel like I wasted 2k! Sent from my SAMSUNG-SGH-I337 using Tapatalk __________________

06-22-2014, 05:03 PM	#40
ghostrider2 Drives: 2014 Bright Yellow ZL1 Vert/M6 Join Date: Apr 2012 Location: Spokane, Washington Posts: 551	Sent from my SAMSUNG-SGH-I337 using Tapatalk __________________

06-09-2014, 11:19 PM	#29
1BLWN/LE Account Suspended Drives: 2013 ZL1 M6 Join Date: Mar 2014 Location: NY Posts: 362	Yeah when I was 6 maybe. Lol! Sent from my SCH-I535 using Tapatalk

06-09-2014, 11:21 PM	#30
Skylane765 Drives: ZL1-1LE, Z/28 Join Date: May 2012 Location: San Diego Posts: 3,262 View My Garage	That's right, but you can do it now! Yes it does look heard to do when you first see it done, but learn the tricks and it's not that hard. Most do not show the tricks.

06-09-2014, 11:23 PM	#31
1BLWN/LE Account Suspended Drives: 2013 ZL1 M6 Join Date: Mar 2014 Location: NY Posts: 362	If I had to do it, then I would, just don't have the patience for film, window tinting, stitch dying, etc.. Sent from my SCH-I535 using Tapatalk

06-09-2014, 11:25 PM	#32
Skylane765 Drives: ZL1-1LE, Z/28 Join Date: May 2012 Location: San Diego Posts: 3,262 View My Garage	Yes, your time may be better for other things. I just like a challenge.

06-10-2014, 03:40 PM	#35
1953 C6 Drives: 2016 SS Vert, 1969 Z/28 Join Date: Jan 2009 Location: Chesapeake, VA Posts: 85	Dan, How did it turn out? I will drive to Fredericksburg to get it done right. My local guy screwed it up... Thanks, Frank QUOTE=ZL1Dan;7711884]Just as a comparison, you should check out this guy's prices. He's doing my ZL1 tomorrow: www.Proshieldinc.com He comes highly recommended, so I know I'm getting quality work done.[/QUOTE]

06-10-2014, 05:23 PM	#36
1BLWN/LE Account Suspended Drives: 2013 ZL1 M6 Join Date: Mar 2014 Location: NY Posts: 362	Just picked up my car. Diamond gloss, xpel ultimate film, windows tinted 25 percent back windows and 35 percent front windows. It came fantastic! Sent from my SCH-I535 using Tapatalk

06-22-2014, 05:18 PM	#41
1BLWN/LE Account Suspended Drives: 2013 ZL1 M6 Join Date: Mar 2014 Location: NY Posts: 362	Nope that's how it is.. you see the film and lighter colors you really see it. With mine it's a lot harder to notice because it's a darker color . Sent from my SCH-I535 using Tapatalk

06-22-2014, 05:44 PM	#42
ghostrider2 Drives: 2014 Bright Yellow ZL1 Vert/M6 Join Date: Apr 2012 Location: Spokane, Washington Posts: 551	So I shouldn't at a level of fuming mad I just want to equip his throat out and rip this shit off? Sent from my SAMSUNG-SGH-I337 using Tapatalk __________________