Got a couple new items from Emblemspro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MountaineerTom · 07-20-2014, 06:13 PM

I love the work they do. Thanks, Roger.

Gloss black bowtie for steeing wheel and Camaro V-Flags engine cover emblem.

A_DILLA · 07-20-2014, 08:11 PM

Did you have to break the Chevy logo on the steering wheel?

MountaineerTom · 07-20-2014, 08:29 PM

Yeah. I took a scribe with a hook on it and pulled the end up until pulled the first tab out of the airbag cover. Then bent it back until it broke. I then used that hook to pull the remaining part back and took an exacto knife to slowly cut away the remaining tabs. It was very tedious and nerve wracking, LOL. I was worried I'd slip and cut the airbag cover.

I had asked in another thread a while back how a guy removed his. I never could get the procedure, just that I wouldn't be able to save the original one.

A_DILLA · 07-20-2014, 08:43 PM

Quote:

Originally Posted by MountaineerTom

Yeah. I took a scribe with a hook on it and pulled the end up until pulled the first tab out of the airbag cover. Then bent it back until it broke. I then used that hook to pull the remaining part back and took an exacto knife to slowly cut away the remaining tabs. It was very tedious and nerve wracking, LOL. I was worried I'd slip and cut the airbag cover.

I had asked in another thread a while back how a guy removed his. I never could get the procedure, just that I wouldn't be able to save the original one.

I was wondering how they did it.. you think if I bout little decals that go on the rim would fit there ? Looks good btw

MountaineerTom · 07-20-2014, 08:53 PM

Thanks.

I don't know. I've seen people put vinyl on exterior bowties, but I've never done it. I don't really see how it sticks to the rough surface of the bowties. Maybe some that have vinyled them will reply.

A_DILLA · 07-20-2014, 09:45 PM

Quote:

Originally Posted by MountaineerTom

Thanks.

I don't know. I've seen people put vinyl on exterior bowties, but I've never done it. I don't really see how it sticks to the rough surface of the bowties. Maybe some that have vinyled them will reply.

Roger at emblempros.com is the man, that's where I got all my emblems. Definitely will keep this thread in mind.

MountaineerTom · 07-20-2014, 10:17 PM

Yeah, he's good to work with.

SS PANTHER · 07-21-2014, 04:19 AM

Looks better than what I did. I took a black sharpie to my logo, but, it looks good.

USCAMARO14 · 07-21-2014, 10:14 AM

Looks Good!!

rodjonathanss · 07-21-2014, 01:31 PM

they stick on the rough exterior badges just fine too ive had mine on for a few months now

07-20-2014, 06:13 PM	#1
MountaineerTom Drives: Summit White 2014 2LT Join Date: Mar 2014 Location: South Carolina Posts: 134	Got a couple new items from Emblemspro I love the work they do. Thanks, Roger. Gloss black bowtie for steeing wheel and Camaro V-Flags engine cover emblem. Attached Images

07-20-2014, 08:11 PM	#2
A_DILLA Optimus Prime Drives: Camaro ZLS [COTW 09/22/14] Join Date: Dec 2012 Location: CYBERTRON Posts: 2,315 View My Garage	Did you have to break the Chevy logo on the steering wheel? __________________ http://www.camaro5.com/forums/showthread.php?p=7909512#post7909512

07-21-2014, 04:19 AM	#8
SS PANTHER Drives: 2013 SS Supercharged Convertible Join Date: May 2013 Location: SoCal Posts: 2,713	Looks better than what I did. I took a black sharpie to my logo, but, it looks good. Attached Images

07-21-2014, 10:14 AM	#9
USCAMARO14 Drives: 2LS 2014 Join Date: Oct 2013 Location: Staten ISland Posts: 3,404	Looks Good!! __________________

07-21-2014, 01:31 PM	#10
rodjonathanss Drives: 2014 Black 2SS/RS Join Date: Jun 2009 Location: houston Posts: 155 View My Garage	they stick on the rough exterior badges just fine too ive had mine on for a few months now __________________ 2014 2SS/RS Black on Black SLP Loudmouth II Axle Back - Megan Racing Coilovers - LED H11 4300k Fog Light Bulbs - Led License Plate Lights - Blacked out Bowties - Z/28 Spoiler More to come ...

07-20-2014, 08:29 PM	#3
MountaineerTom Drives: Summit White 2014 2LT Join Date: Mar 2014 Location: South Carolina Posts: 134	Yeah. I took a scribe with a hook on it and pulled the end up until pulled the first tab out of the airbag cover. Then bent it back until it broke. I then used that hook to pull the remaining part back and took an exacto knife to slowly cut away the remaining tabs. It was very tedious and nerve wracking, LOL. I was worried I'd slip and cut the airbag cover. I had asked in another thread a while back how a guy removed his. I never could get the procedure, just that I wouldn't be able to save the original one.

07-20-2014, 08:53 PM	#5
MountaineerTom Drives: Summit White 2014 2LT Join Date: Mar 2014 Location: South Carolina Posts: 134	Thanks. I don't know. I've seen people put vinyl on exterior bowties, but I've never done it. I don't really see how it sticks to the rough surface of the bowties. Maybe some that have vinyled them will reply.

07-20-2014, 10:17 PM	#7
MountaineerTom Drives: Summit White 2014 2LT Join Date: Mar 2014 Location: South Carolina Posts: 134	Yeah, he's good to work with.