New style 1LE Emblem - Emblempros prototype - Page 8 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

shinzon · 07-29-2014, 09:46 PM

!!!!!!!!!!!!

On a side Note: Dear Emblem Pros now that you have the rights to using the 1le emblem could you PLEASE look into making some floor mats or even an emblem we could stick - sew into our floor mats... PLEASE

Palabraword · 07-29-2014, 10:10 PM

Quote:

Originally Posted by shinzon

!!!!!!!!!!!!

On a side Note: Dear Emblem Pros now that you have the rights to using the 1le emblem could you PLEASE look into making some floor mats or even an emblem we could stick - sew into our floor mats... PLEASE

+1

dragonZ28 · 07-29-2014, 10:45 PM

Honestly I do not know anything about making a floor mat.
I do not have the equipment needed for it.
And it would need to start from scratch.

The way I read it: there is a very good floor mat vendor who does have the needed machinery, who is pursuing this. And I would imagine they are fairly well into the approval process. I ordered some Lloyds floor mats for my Camaro and they were nice and thick. Heavy duty equipment is needed for that.

Even to make a patch or something, all of the same things would still apply.
It is not something I know much about. I think they will come through for you.

BATMOB1LE · 07-29-2014, 11:16 PM

Alright Roger, I need your help lol!

My car really only has a black/red theme. I'm trying to picture different setups...

I"m thinking: black base, black onyx frame, red 1 and / but it's the LE that's throwing me off. If the base is black, and the frame is black onyx, would you see the LE nicely if the inset was black?

dragonZ28 · 07-29-2014, 11:49 PM

Quote:

Originally Posted by BATMOB1LE

Alright Roger, I need your help lol!

My car really only has a black/red theme. I'm trying to picture different setups...

I"m thinking: black base, black onyx frame, red 1 and / but it's the LE that's throwing me off. If the base is black, and the frame is black onyx, would you see the LE nicely if the inset was black?

If you use the mirror black on the frame and the flat black in the center of the "LE" you will be able to see it.
Yes, they are both black, but they do not look the same.
Obviously from 30 feet away probably not, but near the car yes you would see it.
They actually look nice together.

DefiantXSoldier · 07-30-2014, 03:01 AM

Quote:

Originally Posted by BATMOB1LE

Alright Roger, I need your help lol!

My car really only has a black/red theme. I'm trying to picture different setups...

I"m thinking: black base, black onyx frame, red 1 and / but it's the LE that's throwing me off. If the base is black, and the frame is black onyx, would you see the LE nicely if the inset was black?

I'm in the same boat. I didn't want the blacks to look all one color from a distance so I did the stainless mirror frame, all other colors the same as you have chosen. I only ordered one for now.

If you order yours with the black onyx frame then I'm sure Roger can post a side by side comparison for us in this thread.

dragonZ28 · 07-30-2014, 07:25 AM

It's a good idea. I can do that. Give me some time.

chipset35 · 07-30-2014, 09:49 AM

Roger,
I want my 1/LE emblem to look exactly (color wise) to the factory Z28 emblem.
What options do I select on your site?

dragonZ28 · 07-30-2014, 06:25 PM

As we get some of these made, I will get photos of them.

XtremeBowtie · 07-30-2014, 09:21 PM

Quick question:

Does the final production version have the sharper corners like your image on page 2?

Thanks

dragonZ28 · 07-30-2014, 11:11 PM

It does have the sharper lines,

However I can make them either way.

XtremeBowtie · 07-30-2014, 11:15 PM

Sharper lines are better.

Hope to place order in few days.

GR8WHITE1 · 07-31-2014, 12:20 AM

Is there an option to make them all the same size like the older one I have purchased? Didn't see an option for that on your website. Also I see you can change to color of the base color, frame color and insert color of the 1 and the / but you can't order the LE to match, is that right? LE only comes in black and chrome outline correct?

dragonZ28 · 07-31-2014, 07:49 AM

The previous style and this new style are still on the site.
The "LE" portion is available in all of the same colors as the "1/" is.
The only difference is that the "LE" portion is generally not going to have the carbon fiber pattern option "from the site".

However....... We are a custom company. If you do not see it on the site, I can still do it.
We have to set the page up so that it covers the options we think most people are going to want. We cannot set it up for endless possibilities, because no one would ever figure it out if we had so many options it causes confusion.

We have the capability to do far more than the website shows. There are some occasions when customers contact me, if they want things they do not specfically see.

Thanks, Roger

07-29-2014, 09:46 PM	#99
shinzon Night Fury Drives: 2014 ZL1 Join Date: Aug 2008 Location: Isle of Birk Posts: 747	!!!!!!!!!!!! On a side Note: Dear Emblem Pros now that you have the rights to using the 1le emblem could you PLEASE look into making some floor mats or even an emblem we could stick - sew into our floor mats... PLEASE __________________ 2014 Black ZL1 - Toothless - Previous Lovers :2014 1LE , 2010 2SS RS,2004 GTO, 2000 Camaro SS x 2

07-29-2014, 11:16 PM	#102
BATMOB1LE • HT • Drives: 2013 2SS/RS 1LE Join Date: Nov 2012 Location: Canada Posts: 907	Alright Roger, I need your help lol! My car really only has a black/red theme. I'm trying to picture different setups... I"m thinking: black base, black onyx frame, red 1 and / but it's the LE that's throwing me off. If the base is black, and the frame is black onyx, would you see the LE nicely if the inset was black? __________________ 2013 Camaro 2SS/RS/1LE - 402 of 451 "BATMOB1LE" - Xpel Stealth Wrap - ZL1 Rockers - 18% Tint - Custom Badges - Heritage Grille - BMR 1.4" Springs - Solo Performance Axel-Back Exhaust - Recaro Sport Seats

07-31-2014, 12:20 AM	#111
GR8WHITE1 Drives: camaro Join Date: Oct 2013 Location: ca Posts: 431	Is there an option to make them all the same size like the older one I have purchased? Didn't see an option for that on your website. Also I see you can change to color of the base color, frame color and insert color of the 1 and the / but you can't order the LE to match, is that right? LE only comes in black and chrome outline correct? Last edited by GR8WHITE1; 07-31-2014 at 12:33 AM.

07-31-2014, 07:49 AM	#112
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,426	The previous style and this new style are still on the site. The "LE" portion is available in all of the same colors as the "1/" is. The only difference is that the "LE" portion is generally not going to have the carbon fiber pattern option "from the site". However....... We are a custom company. If you do not see it on the site, I can still do it. We have to set the page up so that it covers the options we think most people are going to want. We cannot set it up for endless possibilities, because no one would ever figure it out if we had so many options it causes confusion. We have the capability to do far more than the website shows. There are some occasions when customers contact me, if they want things they do not specfically see. Thanks, Roger Last edited by dragonZ28; 07-31-2014 at 09:29 AM.

07-29-2014, 10:45 PM	#101
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,426	Honestly I do not know anything about making a floor mat. I do not have the equipment needed for it. And it would need to start from scratch. The way I read it: there is a very good floor mat vendor who does have the needed machinery, who is pursuing this. And I would imagine they are fairly well into the approval process. I ordered some Lloyds floor mats for my Camaro and they were nice and thick. Heavy duty equipment is needed for that. Even to make a patch or something, all of the same things would still apply. It is not something I know much about. I think they will come through for you.

07-30-2014, 07:25 AM	#105
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,426	It's a good idea. I can do that. Give me some time.

07-30-2014, 09:49 AM	#106
chipset35 Drives: 2014 Camaro 2SS/RS 1LE Join Date: Oct 2013 Location: Williamsburg VA Posts: 177	Roger, I want my 1/LE emblem to look exactly (color wise) to the factory Z28 emblem. What options do I select on your site?

07-30-2014, 06:25 PM	#107
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,426	As we get some of these made, I will get photos of them.

07-30-2014, 09:21 PM	#108
XtremeBowtie Drives: 2013 2SS/RS 1LE Camaro / 1963 C-10 Join Date: Mar 2007 Location: NC Posts: 149	Quick question: Does the final production version have the sharper corners like your image on page 2? Thanks

07-30-2014, 11:11 PM	#109
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,426	It does have the sharper lines, However I can make them either way.

07-30-2014, 11:15 PM	#110
XtremeBowtie Drives: 2013 2SS/RS 1LE Camaro / 1963 C-10 Join Date: Mar 2007 Location: NC Posts: 149	Sharper lines are better. Hope to place order in few days.