Replace Supercharger - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tnspd · 08-12-2014, 05:59 PM

Here is a picture of the part they got in to fix my rattling supercharger. They said they will have my car for three days. Name: uploadfromtaptalk1407880776671.jpg
Views: 1459
Size: 49.5 KB

Name: uploadfromtaptalk1407880776671.jpg
Views: 1459
Size: 49.5 KB

It is the first one they have done.

Sent from my SPH-L710 using Tapatalk

LordAndroid · 08-12-2014, 09:46 PM

Mine goes in tomorrow i could be in the same boat

Sent from my Awesome S5 on Att

vatechguy3 · 08-12-2014, 09:58 PM

Thought this was a 6 hour fix???

Tony

LordAndroid · 08-12-2014, 10:41 PM

Quote:

Originally Posted by vatechguy3

Thought this was a 6 hour fix???

Tony

How did you come to expect it to be a 6 hour fix?

Sent from my Awesome S5 on Att

*mlee* · 08-12-2014, 10:44 PM

It's a long shot but talk them into pulling that pulley and putting a hub on it now so you can change pulleys later without removing the S/C top.

vetterm37 · 08-12-2014, 11:57 PM

mine took 1.75 days the flat rate on it was 8 hours

*mlee* · 08-13-2014, 12:11 AM

Quote:

Originally Posted by vetterm37

mine took 1.75 days the flat rate on it was 8 hours

Mine took a month because the car sat in their back lot while they did nothing.

I have a new dealership now with great service.

Al C. · 08-13-2014, 12:14 AM

6hrs for the swap is the "approved" time allowed by GM. Mine took 6

HDRDTD · 08-13-2014, 12:16 AM

Once the dealer has done a couple, it can probably be done in 8 hours or so, but for the first one, they always plan on taking their time to figure out the best way to do it properly. Thus the 3-day estimate for the first one for that dealer.

ZED SLED · 08-13-2014, 07:36 AM

How many have had this rattle start after 10k miles? I'm almost at 11k and still no sign of a rattle. I received the letter a while back and know I'm warrantied anyway.

tnspd · 08-13-2014, 09:07 AM

Quote:

Originally Posted by HDRDTD

Once the dealer has done a couple, it can probably be done in 8 hours or so, but for the first one, they always plan on taking their time to figure out the best way to do it properly. Thus the 3-day estimate for the first one for that dealer.

Yes, they said they want to ensure it is done correctly and it is their first one. So they are allowing about 3 days to get it done. That is fine with me as long as it is done correctly and has no issues after it is done. I plan to drive it about 2 weeks to ensure it is ok before I put my headers, cold air, ported TB, and then go get a tune.

tnspd · 08-13-2014, 09:08 AM

Quote:

Originally Posted by ZED SLED

How many have had this rattle start after 10k miles? I'm almost at 11k and still no sign of a rattle. I received the letter a while back and know I'm warrantied anyway.

mine has 19K and it started about 12K if I remember correctly.

HDRDTD · 08-13-2014, 09:48 AM

Quote:

Originally Posted by ZED SLED

How many have had this rattle start after 10k miles? I'm almost at 11k and still no sign of a rattle. I received the letter a while back and know I'm warrantied anyway.

Mine was replaced at somewhere around 17k miles.

TX/ZL1 · 08-13-2014, 10:15 AM

Dropped my 2014 off yesterday morning at 7:00. They called me at 1:30 and told me to come pick it up. This obviously wasn't their first rodeo. 1200 miles on the car.

08-12-2014, 05:59 PM	#1
tnspd Drives: 18 Camaro ZL1 1LE (WILSON) Join Date: Jul 2009 Location: N.C. Posts: 1,340	Replace Supercharger Here is a picture of the part they got in to fix my rattling supercharger. They said they will have my car for three days. It is the first one they have done. Sent from my SPH-L710 using Tapatalk __________________ Camaro South Hot Cars and Hospitality on FB camarosouth@hotmail.com

08-12-2014, 09:58 PM	#3
vatechguy3 Drives: 2014 ZL1 M6 Join Date: Jul 2014 Location: Virginia Posts: 493	Thought this was a 6 hour fix??? Tony __________________ 2014 ZL1 M6 Bone stock, for now! 2001 Z28 M6 !cags, !air, FTP 85mm Lid, Z06 85mm MAF, P&P TB !4x4, Strano Springs, Strano Sways, Koni 4/4s, Watts Link ARH LTs, ARH catted Y, SLP catback with Dual/Dual Muffler, SLP CME and Valance OE Wheels Machined Face C5 DDs, 18x10.5s, with 295/35-18s on all 4 corners! 352rwhp and 366rwtq

08-12-2014, 10:44 PM	#5
mlee CamaroFans.com Drives: ZLE & ZR2 Join Date: Oct 2008 Location: Conroe, TX Posts: 37,999 View My Garage	It's a long shot but talk them into pulling that pulley and putting a hub on it now so you can change pulleys later without removing the S/C top. __________________

08-12-2014, 11:57 PM	#6
vetterm37 Drives: 2013zl1&1972 vette:2010sierra Join Date: Mar 2013 Location: calgary Posts: 18	had mine done mine took 1.75 days the flat rate on it was 8 hours

08-13-2014, 07:36 AM	#10
ZED SLED Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009 Location: South of Raleigh, NC Posts: 9,617 View My Garage	How many have had this rattle start after 10k miles? I'm almost at 11k and still no sign of a rattle. I received the letter a while back and know I'm warrantied anyway. __________________

08-12-2014, 09:46 PM	#2
LordAndroid Drives: 2013 ZL1 Join Date: Sep 2012 Location: Chicago Posts: 143	Mine goes in tomorrow i could be in the same boat Sent from my Awesome S5 on Att

08-13-2014, 12:14 AM	#8
Al C. Drives: ZL1 #529 "El-Jefe" Join Date: Mar 2012 Location: Las Vegas, NV Posts: 668	6hrs for the swap is the "approved" time allowed by GM. Mine took 6

08-13-2014, 12:16 AM	#9
HDRDTD Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011 Location: Trenton, Michigan Posts: 7,046	Once the dealer has done a couple, it can probably be done in 8 hours or so, but for the first one, they always plan on taking their time to figure out the best way to do it properly. Thus the 3-day estimate for the first one for that dealer.

08-13-2014, 10:15 AM	#14
TX/ZL1 Drives: '14 ZL1 RRM M6 Join Date: Aug 2014 Location: Texas Posts: 471	Dropped my 2014 off yesterday morning at 7:00. They called me at 1:30 and told me to come pick it up. This obviously wasn't their first rodeo. 1200 miles on the car.