How Many Use The DashLogic on there ZL1? - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

azburk · 08-13-2014, 12:15 PM

I have v1.15 since April, no issues.

Bigtime53 · 08-14-2014, 07:25 PM

Quote:

Originally Posted by Sven59

Mine has been freezing and after start up the radio display disappears. Anyone else having those issues? I emailed Palmer but no answer yet. Mine doesn't have the Mylink nav option.

Well what did palmer tell you? You have not let us know if they even answered your email or not?

camguynj · 08-14-2014, 09:04 PM

Quote:

Originally Posted by azburk

I have v1.15 since April, no issues.

V1.15 works ( but only for 10-13 Mylinks) V1.17 works only for '14s

See excerpt from PM Palmer sent me about problem I was having only with v1.17
in my '13 Apparently Palmer made a major change in v1.17 for the '14 Mylink and that affected how it works with '13 Mylink . Here's an excerpt I got from Palmer in a PM I sent them about the problem I started having when I upgraded from v1.15 to v1.17 "I think we are going to release 2 firmware versions for the Camaro one for '14s and one for '10-13s." The rest of their PM basically goes on to say how the '14 and '13 Mylink handle DIC and HUD text displays differently. I reinstalled v1.15 and the freeze problem went away.

Bigtime53 · 08-14-2014, 09:21 PM

Quote:

Originally Posted by camguynj

V1.15 works ( but only for 10-13 Mylinks) V1.17 works only for '14s

See excerpt from PM Palmer sent me about problem I was having only with v1.17
in my '13 Apparently Palmer made a major change in v1.17 for the '14 Mylink and that affected how it works with '13 Mylink . Here's an excerpt I got from Palmer in a PM I sent them about the problem I started having when I upgraded from v1.15 to v1.17 "I think we are going to release 2 firmware versions for the Camaro one for '14s and one for '10-13s." The rest of their PM basically goes on to say how the '14 and '13 Mylink handle DIC and HUD text displays differently. I reinstalled v1.15 and the freeze problem went away.

I know,I read this when you posted it the first time. Just was wondering if palmer ever did email Sven59 back to see if he cared about customer service or not. I am sure he does since he did send you a email.

Sven59 · 08-15-2014, 10:53 AM

Sorry I haven't posted, have not heard from Palmer, Camguynj was nice enough to send me the 1.15 ver. I have not had a chance to load it yet, hopefully this weekend. Once I get it in and checked out I will post something.

jon6.0 · 08-15-2014, 11:37 AM

Last time I emailed Palmer it only took a day for him to respond. It might have went to his junk folder.

Sven59 · 08-15-2014, 11:47 AM

Yeah, I will troubleshoot with what I have before I contact them again.

JacobC1983 · 08-17-2014, 07:46 PM

Kind of wishing I didn't purchase this thing. It froze as I was pulling out of the driveway. I emailed Palmer Performance to alert them of the issues I was having. Maybe if we all email support it will light a fire under their asses.

If anybody has version 1.15 working in their 2013 ZL1 and has the software - please message me/email it to me. I haven't had a drive in the past week that didn't freeze in less than 10 minutes.

At this point, I basically paid $250 for a broken device.

Bigtime53 · 08-17-2014, 09:10 PM

I hope palmer helps you. Drove my yesterday for about 3hrs and had no trouble at all. Hang in there as soon as you get it right you will really like it. Someone on here will help you.

JacobC1983 · 08-17-2014, 09:43 PM

Thanks for the kind words. Sad too, because when it is working, I love the thing.

Camero5 · 08-17-2014, 10:52 PM

Quote:

Originally Posted by JacobC1983

Kind of wishing I didn't purchase this thing. It froze as I was pulling out of the driveway. I emailed Palmer Performance to alert them of the issues I was having. Maybe if we all email support it will light a fire under their asses.

If anybody has version 1.15 working in their 2013 ZL1 and has the software - please message me/email it to me. I haven't had a drive in the past week that didn't freeze in less than 10 minutes.

At this point, I basically paid $250 for a broken device.

I didn't read the other posts but are you running 1.15 or 1.17? I have dash logic on my 13 ZL1 with 1.17 and no issues freezing. Only has happened when I knock it with my leg. Since adding the low profile extension, that hasn't been an issue. My mylink does have navi which I noticed the others with issues don't have the navi.

Sent from my iPhone using Tapatalk

jon6.0 · 08-17-2014, 11:13 PM

Quote:

Originally Posted by JacobC1983

Kind of wishing I didn't purchase this thing. It froze as I was pulling out of the driveway. I emailed Palmer Performance to alert them of the issues I was having. Maybe if we all email support it will light a fire under their asses.

If anybody has version 1.15 working in their 2013 ZL1 and has the software - please message me/email it to me. I haven't had a drive in the past week that didn't freeze in less than 10 minutes.

At this point, I basically paid $250 for a broken device.

Mine is still working good with 1.17, but I have a 2014 with MyLink and Nav. I bought the little extender cable and it did freeze when I used that though.

jon6.0 · 08-17-2014, 11:15 PM

I'm going to go make a post in Palmer's thread on Corvette Forum telling them we are having issues and link this post.

jon6.0 · 08-17-2014, 11:31 PM

They are a vendor on Corvette Forum. Here's the Corvette Forum thread: http://forums.corvetteforum.com/c6-f...-discount.html

08-13-2014, 12:15 PM	#85
azburk Drives: 2013 SW ZL1 #7243 Join Date: May 2009 Location: AZ Posts: 188	I have v1.15 since April, no issues. __________________

08-15-2014, 10:53 AM	#89
Sven59 HAMMER PILOT Drives: 13 ZL1#182, 85 CJ7, 16 Silverado Join Date: Nov 2011 Location: Tucson AZ Posts: 4,387	Sorry I haven't posted, have not heard from Palmer, Camguynj was nice enough to send me the 1.15 ver. I have not had a chance to load it yet, hopefully this weekend. Once I get it in and checked out I will post something. __________________ "DO YOU WANT ME TO PUT THE HAMMER DOWN?"

08-15-2014, 11:37 AM	#90
jon6.0 Going for Plaid Drives: 2011 C6 Join Date: Jan 2010 Location: Phoenix Posts: 885	Last time I emailed Palmer it only took a day for him to respond. It might have went to his junk folder. __________________ 2014 ZL1, manual trans, carbon hood insert, Rotofab, Pacesetter 1 7/8" headers, 1" drop BMR springs, stock pulleys, 91 octane tune, 545rwhp & 515rwtq Serviced and modded by Cordes Performance. 2011 C6, 750rwhp, forged LS3, ported LSA heads, Vortech Ti-trim, 227/243 115+4 Lunati cam, ported LS3 intake, Alky Control methanol, Pfadt sways/shocks/trans mounts, Pfadt tri-y headers(Sold 6/28/14)

08-15-2014, 11:47 AM	#91
Sven59 HAMMER PILOT Drives: 13 ZL1#182, 85 CJ7, 16 Silverado Join Date: Nov 2011 Location: Tucson AZ Posts: 4,387	Yeah, I will troubleshoot with what I have before I contact them again. __________________ "DO YOU WANT ME TO PUT THE HAMMER DOWN?"

08-17-2014, 07:46 PM	#92
JacobC1983 Drives: 2019 ZL1 Join Date: Jan 2014 Location: Missouri Posts: 488	Kind of wishing I didn't purchase this thing. It froze as I was pulling out of the driveway. I emailed Palmer Performance to alert them of the issues I was having. Maybe if we all email support it will light a fire under their asses. If anybody has version 1.15 working in their 2013 ZL1 and has the software - please message me/email it to me. I haven't had a drive in the past week that didn't freeze in less than 10 minutes. At this point, I basically paid $250 for a broken device. Last edited by JacobC1983; 08-17-2014 at 08:45 PM.

08-17-2014, 09:10 PM	#93
Bigtime53 Drives: 2013 ZL1 Join Date: Mar 2013 Location: Oklahoma Posts: 2,326	I hope palmer helps you. Drove my yesterday for about 3hrs and had no trouble at all. Hang in there as soon as you get it right you will really like it. Someone on here will help you.

08-17-2014, 09:43 PM	#94
JacobC1983 Drives: 2019 ZL1 Join Date: Jan 2014 Location: Missouri Posts: 488	Thanks for the kind words. Sad too, because when it is working, I love the thing.

08-17-2014, 11:15 PM	#97
jon6.0 Going for Plaid Drives: 2011 C6 Join Date: Jan 2010 Location: Phoenix Posts: 885	I'm going to go make a post in Palmer's thread on Corvette Forum telling them we are having issues and link this post. __________________ 2014 ZL1, manual trans, carbon hood insert, Rotofab, Pacesetter 1 7/8" headers, 1" drop BMR springs, stock pulleys, 91 octane tune, 545rwhp & 515rwtq Serviced and modded by Cordes Performance. 2011 C6, 750rwhp, forged LS3, ported LSA heads, Vortech Ti-trim, 227/243 115+4 Lunati cam, ported LS3 intake, Alky Control methanol, Pfadt sways/shocks/trans mounts, Pfadt tri-y headers(Sold 6/28/14)

08-17-2014, 11:31 PM	#98
jon6.0 Going for Plaid Drives: 2011 C6 Join Date: Jan 2010 Location: Phoenix Posts: 885	They are a vendor on Corvette Forum. Here's the Corvette Forum thread: http://forums.corvetteforum.com/c6-f...-discount.html __________________ 2014 ZL1, manual trans, carbon hood insert, Rotofab, Pacesetter 1 7/8" headers, 1" drop BMR springs, stock pulleys, 91 octane tune, 545rwhp & 515rwtq Serviced and modded by Cordes Performance. 2011 C6, 750rwhp, forged LS3, ported LSA heads, Vortech Ti-trim, 227/243 115+4 Lunati cam, ported LS3 intake, Alky Control methanol, Pfadt sways/shocks/trans mounts, Pfadt tri-y headers(Sold 6/28/14)