![]() |
|
|
#43 |
![]() Drives: Possibly a 1LE in the near future. Join Date: Oct 2012
Location: US Of A
Posts: 436
|
Is the hook locked in the position that it is in, or does it swivel up and down? Can it hit the body of the car?
How could you drill the hole in the right spot without removing anything? Could you just leave the hook in all the time so you don't have to use the plug? |
|
|
|
|
|
#44 |
![]() |
The hook is locked in that position but even if it was loose there is enough clearance it would not hit the body.
The kit comes with a paper template that pinpoints the drill location. You could definitely leave the hook in all the time. Only concern I would have is someone stealing it. Sent from my iPhone using Tapatalk |
|
|
|
|
|
#45 |
![]() Drives: Possibly a 1LE in the near future. Join Date: Oct 2012
Location: US Of A
Posts: 436
|
Did you install the rear hook? How easy/hard was that?
|
|
|
|
|
|
#46 |
![]() |
|
|
|
|
|
|
#47 |
![]() Drives: Possibly a 1LE in the near future. Join Date: Oct 2012
Location: US Of A
Posts: 436
|
Yeah....you don't have a '13.
|
|
|
|
|
|
#48 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2013 Camaro ZL1 Join Date: Dec 2012
Location: Dallas, Texas
Posts: 2,154
|
|
|
|
|
|
|
#49 |
|
|
|
|
|
#50 |
|
|
|
|
|
#51 |
|
I can make a video of how to pull the rear bumper.
The tow hooks have a set screw so you can position the D ring at any angle or keep it from not touching the body. |
|
|
|
|
|
|
#52 |
|
|
|
|
|
#53 |
|
HAMMER PILOT
Drives: 13 ZL1#182, 85 CJ7, 16 Silverado Join Date: Nov 2011
Location: Tucson AZ
Posts: 4,387
|
If you are worried about the paint you can tie a rag around the inside when it is being towed.
__________________
|
|
|
|
|
|
#54 |
|
|
|
|
|
#55 |
![]() Drives: Possibly a 1LE in the near future. Join Date: Oct 2012
Location: US Of A
Posts: 436
|
Do you have a video for installing the front tow hook on a '13 ZL1?
|
|
|
|
|
|
#56 |
![]() ![]() |
Just ordered a set. Thanks!
|
|
|
|
|
|
|
|
![]() |
|
|