2013 v6 to 2010 Brembo

[Jenner]

I bought a set of 2010 Brembo calipers from a member here and I was wondering if they'll fit my 2013? I know I need new brake lines and need to cut or replace the rear heat shield, but besides that it should be ok right?

[Lil' Nasty]

They will bolt on just fine and will be a upgrade for sure. You need the correct Caliper bolts and the front and rear pin kit. I would recommend the Goodridge SS lines, Motul BF, and a good cutting tool for the dust shields...

[Jenner]

Originally Posted by Lil' Nasty

They will bolt on just fine and will be a upgrade for sure. You need the correct Caliper bolts and the front and rear pin kit. I would recommend the Goodridge SS lines, Motul BF, and a good cutting tool for the dust shields...

I thought so. I'm probably gonna go with the goodridge lines. Where do I get the bolts and pin kit?

[Lil' Nasty]

Originally Posted by Jenner

I thought so. I'm probably gonna go with the goodridge lines. Where do I get the bolts and pin kit?

You can get the bolts from your local dealer or from Maureen at beckyrodgers chevy.

rear pin kit- http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

Front - http://www.amazon.com/ACDelco-18K197...rb_top?ie=UTF8

I'll look and see where the caliper bolt # is but im sure Maureen knows what it is too.

[Lil' Nasty]

Just want to hit home that getting this tool http://www.harborfreight.com/power-t...ool-67537.html

Would make your life so much easier for the dust shields.

[Jenner]

Originally Posted by Lil' Nasty

Just want to hit home that getting this tool http://www.harborfreight.com/power-t...ool-67537.html

Would make your life so much easier for the dust shields.

Thanks for the part #s. And that's a good deal for that tool.