**NEW** PCM of NC Catch Cans!

[Kelly@PCMofNC]

Hey all! Just wanted to announce another new product from PCM of NC, INC - our very own line of catch cans!

CNC Machined from 6061 aluminum, these high quality cans install in very little time, and are easy to empty (simply unscrews in half). They fit all 5th Gen V8 Camaros, including LSA, L99, and LS3.

Our brackets are LS-specific and powdercoated black for a clean finish. No pipe threads or brass fittings; all of our fittings are high quality black Fragola AN -6 pushlock - which means no hose clamps either. Our filter media is non-metallic, it will never rust or potentially send debris through your engine. Goodyear 3/8 black pushlock hose is supplied as well.

The design of our can includes a wall in the upper section which forces the vapors downward, trapping any oil in the bottom half. The bottom half is tapped and plugged, you can either unscrew the plug or the whole half of the can to drain it.

Our current brackets also have been installed on 07-13 Full Size Trucks, 4th generation f-bodies, and Trailblazer 5.3L & 6.0L models. In development for release within the next 1-2 weeks: 5th Gen V6, CTS-V, GTO, G8 GT, earlier model trucks.

If you are interested in checking out the instructions, you can download them HERE. If you would like to check it out on our website, HERE is a link to the Camaro specific kit, and also HERE is a link to the others.

These are IN STOCK and ready to go!

Here are more photos of the cans, on and off the car.





CAD Drawing of Camaro-specific bracket:

[Kelly@PCMofNC]

Thanks for your orders so far! We are very excited about getting these out on the market.

[RBL]

Looks real nice.

[Kelly@PCMofNC]

Originally Posted by RBL

Looks real nice.

Thanks! Here's one on a ZL1 we just did today.

[Schluney]

Looks awesome! I like the design!!

[Kelly@PCMofNC]

Originally Posted by Schluney

Looks awesome! I like the design!!

Thanks for your feedback! We went through many revisions before finally being happy with it

[Kyle2k]

Any chance of getting them anodized in black?

[PalmerGA]

Do you have a picture of one mounted on a L99 engine? Looked on your site but I guess you don't have catch cans posted yet.

[GONIF]

I'm looking for one ,but can not tell the diff on all the brands . What makes this better then the competition , Elite , Apex ? I figure if I'm going to buy one , I want to do it once with the best one for the money . Any of the vendors fell free to chime in . Any chance of a group buy on any of the brands ?

[Kyle2k]

http://pcmofnc.com/index.php/perform...-catch-can-kit

Originally Posted by PalmerGA

Do you have a picture of one mounted on a L99 engine? Looked on your site but I guess you don't have catch cans posted yet.

[Kyle2k]

Originally Posted by Kyle2k

Any chance of getting them anodized in black?

Bump for answer

[Kelly@PCMofNC]

Originally Posted by PalmerGA

Do you have a picture of one mounted on a L99 engine? Looked on your site but I guess you don't have catch cans posted yet.

Hey there, here is a link to it on our website, Catch Can Kit. There are a couple pics there of the catch cans mounted on Camaros!

Originally Posted by GONIF

I'm looking for one ,but can not tell the diff on all the brands . What makes this better then the competition , Elite , Apex ? I figure if I'm going to buy one , I want to do it once with the best one for the money . Any of the vendors fell free to chime in . Any chance of a group buy on any of the brands ?

Without putting any of the other brands down, I will just tell you what I like about ours;

- Comes standard with AN pushlock fittings, no brass barbed/pipe fittings, no hose clamps

- Has a wall that forces vapors/oil into the bottom of the can for storage, some just let it pass through

- Easy to clean (unscrew in half, or drain from bottom)

- Discrete bracketry mounts it cleanly on the side of the head, specific Camaro-mount

Originally Posted by Kyle2k

Any chance of getting them anodized in black?

We may possibly offer that in the future, but for now they are just polished aluminum. Thanks for asking!

[PalmerGA]

Originally Posted by Kyle2k

http://pcmofnc.com/index.php/perform...-catch-can-kit

Originally Posted by Kelly@PCMofNC

Hey there, here is a link to it on our website, Catch Can Kit. There are a couple pics there of the catch cans mounted on Camaros!

Thanks but, I saw a LS3 and ZL1 mounted picture but no L99.

[Kelly@PCMofNC]

Originally Posted by PalmerGA

Thanks but, I saw a LS3 and ZL1 mounted picture but no L99.

It mounts in the same location as the LS3.