Bluff City Camaro Club - Page 298 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

EvilZL1 · 10-09-2014, 01:00 AM

Quote:

Originally Posted by djpelosi

Does anyone know what this line is that comes out of the front side of the intake port? Looks to be some kind of vacuum or PVC. Nobody on Camaro5 seems to know lol. Trying to figure out if there is a way to reroute it or hide it because it's ugly.

tried rerouting it under the intake tube and TB?

michiganman13 · 10-09-2014, 09:03 AM

https://autos.yahoo.com/news/thief-s...113005846.html

That's one way to get a Z/28

EvilZL1 · 10-09-2014, 09:03 AM

Good morning all!

Sent from Wayne's Manor

ABADZL1 · 10-09-2014, 09:30 AM

Morning Aston!

djpelosi · 10-09-2014, 09:31 AM

Quote:

Originally Posted by EvilZL1

tried rerouting it under the intake tube and TB?

Found out what it was... it's for the evap solenoid. Can't reroute it under the TB because the line doesn't flex, it's like a hard plastic. TechAFX sells a relocation kit that hides the heater hose, evap solenoid line and fuel rail flip for $289.00. Think I'm going to buy that, because the engine bay of the SS is gross lol. Will help clean it up a lot.

ABADZL1 · 10-09-2014, 09:33 AM

I thought my engine bay was pretty good.

EvilZL1 · 10-09-2014, 09:35 AM

Quote:

Originally Posted by djpelosi

Found out what it was... it's for the evap solenoid. Can't reroute it under the TB because the line doesn't flex, it's like a hard plastic. TechAFX sells a relocation kit that hides the heater hose, evap solenoid line and fuel rail flip for $289.00. Think I'm going to buy that, because the engine bay of the SS is gross lol. Will help clean it up a lot.

Well I guess take that route then. Glad the Z doesn't have that problem. Haha

Sent from Wayne's Manor

Sapphire · 10-09-2014, 09:35 AM

morning guys. there was not a lot of traffic this morning, woot!

EvilZL1 · 10-09-2014, 09:36 AM

I'm just now about to get out of bed lol good!

Sent from Wayne's Manor

djpelosi · 10-09-2014, 09:36 AM

Quote:

Originally Posted by ABADZL1

I thought my engine bay was pretty good.

It's mainly all the hoses on top of the intake. There's the 2 heater hoses, then there's the fuel line that goes across, and then this evap solenoid line. All of that basically sits on top of the intake manifold. I plan on painting the manifold and you can't see it that well with all the stuff in the way. With the hose relocation kit, the only thing you see on top of the intake once it's installed is the fuel rail going across (I plan on fixing that too with some FAST rails that are connected in the back instead of the middle). You have a pic of your engine bay?

Quote:

Originally Posted by YellowCammy

morning guys. there was not a lot of traffic this morning, woot!

Morning! Yep I made it to work in about 25 minutes instead of the normal 45 minutes - 1 hour lol.

Sapphire · 10-09-2014, 09:50 AM

Quote:

Originally Posted by djpelosi

Morning! Yep I made it to work in about 25 minutes instead of the normal 45 minutes - 1 hour lol.

yeah same here. shaved about 15 min off my travel. must be because of fall break and everyone is going on vacation with their heathen children

SNSSTR · 10-09-2014, 10:10 AM

Quote:

Originally Posted by djpelosi

It's mainly all the hoses on top of the intake. There's the 2 heater hoses, then there's the fuel line that goes across, and then this evap solenoid line. All of that basically sits on top of the intake manifold. I plan on painting the manifold and you can't see it that well with all the stuff in the way. With the hose relocation kit, the only thing you see on top of the intake once it's installed is the fuel rail going across (I plan on fixing that too with some FAST rails that are connected in the back instead of the middle). You have a pic of your engine bay?

For the EVAP, all I did, was cut the fittings off the ends of the hard hose and put a stainless braided line on them. I also relocated my evap solenoid under the fusebox.

For the heater hoses, I just bought the two gates hoses from O'Reilly's and called it a day.

GoldCartridgeGamer · 10-09-2014, 10:20 AM

Fall Break for shelby county started this past Monday. Guessing UofM starts end of this week?

djpelosi · 10-09-2014, 10:27 AM

Quote:

Originally Posted by Rohdeo16

For the EVAP, all I did, was cut the fittings off the ends of the hard hose and put a stainless braided line on them. I also relocated my evap solenoid under the fusebox.

For the heater hoses, I just bought the two gates hoses from O'Reilly's and called it a day.

That looks great! And great idea on the gates hoses... I may go to the store today and do the same thing.

How's the LSXR working out for you? Was it worth the money?

10-09-2014, 09:03 AM	#4161
EvilZL1 Snake Eater Drives: 2012 AGM ZL1 Join Date: Oct 2011 Location: TN Posts: 2,737	Good morning all! Sent from Wayne's Manor __________________ Build Thread: http://www.camaro5.com/forums/showth...95#post8351295 Make sure you don’t forget to subscribe to my channel! More content on the way. Like, share with your friends https://www.youtube.com/channel/UC9Z...sP2wjsLLFeP1zQ Follow me on instagram: http://www.instagram.com/snkeatr/

10-09-2014, 09:30 AM	#4162
ABADZL1 ZL1 Pilot Drives: 2013 ZL1 Join Date: Apr 2014 Location: TN Posts: 1,673 View My Garage	Morning Aston! __________________

10-09-2014, 09:33 AM	#4164
ABADZL1 ZL1 Pilot Drives: 2013 ZL1 Join Date: Apr 2014 Location: TN Posts: 1,673 View My Garage	I thought my engine bay was pretty good. __________________

10-09-2014, 09:35 AM	#4166
Sapphire Drives: 2013 2SS Hot Wheels Edition Join Date: May 2013 Location: Tennessee Posts: 2,782	morning guys. there was not a lot of traffic this morning, woot! __________________

10-09-2014, 09:36 AM	#4167
EvilZL1 Snake Eater Drives: 2012 AGM ZL1 Join Date: Oct 2011 Location: TN Posts: 2,737	I'm just now about to get out of bed lol good! Sent from Wayne's Manor __________________ Build Thread: http://www.camaro5.com/forums/showth...95#post8351295 Make sure you don’t forget to subscribe to my channel! More content on the way. Like, share with your friends https://www.youtube.com/channel/UC9Z...sP2wjsLLFeP1zQ Follow me on instagram: http://www.instagram.com/snkeatr/

10-09-2014, 09:03 AM	#4160
michiganman13 Drives: 2013 LS Camaro Join Date: Jun 2013 Location: United States Posts: 94 View My Garage	https://autos.yahoo.com/news/thief-s...113005846.html That's one way to get a Z/28

10-09-2014, 10:20 AM	#4171
GoldCartridgeGamer Drives: 2014 Ford SVT Raptor SuperCrew Join Date: Jun 2011 Location: Memphis, TN Posts: 7,527	Fall Break for shelby county started this past Monday. Guessing UofM starts end of this week? __________________ Phoenix (sold) 2014 Ford SVT Raptor SuperCrew How to hug your camaro Buy the car that you would most like to get beat in. The other guy will always be faster.