09-25-2014, 07:06 PM | #1 |
Envy
Drives: 2011 SGM 2SS/RS - Black hood/hockey Join Date: Aug 2011
Location: Renton, WA
Posts: 915
|
Seat Height Recall
Have any of you gotten this notice in the mail yet for GM recall 14271?
It involves the bolt that attaches to the adjuster screw that controls the driver's side seat height. The crazy thing is, mine JUST fell out last week. My seat is always at the lowest height possible, but when I got out of the car one day to go to work, the seat raised up like a foot or so, almost to the roof. I didn't realize the seat could even go that high, or that anyone that short existed on planet Earth. After I got back home, I just replaced the bolt myself, but it sounds like they have a new part, likely a locking nut to keep the bolt from reversing. Anybody hear about this? |
09-26-2014, 11:42 AM | #2 |
Drives: 2011 RJT Camaro LT2 RS auto shift Join Date: Dec 2011
Location: Washington state
Posts: 1,861
|
Yes I got it last Monday. Nothing has happen o my seat yet but I will take it in when they get the parts in.
__________________
Caddy
|
09-26-2014, 11:45 AM | #3 |
The girl with the 2 Danes
Drives: 2014 2SS/RS LS3 Join Date: Oct 2013
Location: Pearland
Posts: 648
|
I haven't heard about this one....
i heard about he key fob about 15 times on FB and people tagging me in it. no I haven't heard about this one....
__________________
|
09-26-2014, 05:45 PM | #4 |
Drives: 2011 SIM 2SS/RS LS3 Join Date: Sep 2013
Location: Tupelo, MS
Posts: 5,902
|
I just got it. Idk if I want to risk my key for it...
__________________
2011 2SS/RS built 8/24/10
|
09-27-2014, 12:46 PM | #5 |
Envy
Drives: 2011 SGM 2SS/RS - Black hood/hockey Join Date: Aug 2011
Location: Renton, WA
Posts: 915
|
Same. I think I might see if they can give me the part and I replace it myself just so I don't have to worry about somebody not getting the memo that I don't want my fob broken.
The bolt does require a fairly large-sized star bit though, so most people might not have the ability to replace it. It shouldn't be too hard to find the bit in a hardware store if you wanted to do the work yourself. I'll see what they say. Last edited by ForgedReality; 09-27-2014 at 01:05 PM. |
09-29-2014, 09:41 AM | #6 | |
Lovin' it!
Drives: 2010 Synergy or a '83 Z-28. Join Date: Apr 2012
Location: Buckley, WA
Posts: 935
|
Quote:
I believe you can just sign a waver on the key. The seat issue is another item all together. (And it was great seeing ya! Thanks for coming!)
__________________
Good friends don't let you do stupid things.....alone.....
|
|
09-29-2014, 09:41 PM | #7 |
Drives: 2010 Camaro SS/RS Join Date: Apr 2009
Location: Warrenton, Or.
Posts: 1,062
|
Is this a 2011 and up recall?
I havent received this notice yet.
__________________
Jayhawk500
2010 2SS/RS, Six speed, Rally Yellow w/ Black Painted Stripes, Boston Acoustic Stereo, Polished 20" wheels, Solo Mach X Catback Exhaust, Solo HF Cats, Halltech CAI, Full Dash & Door ABL, ABL Lit Homelink Buttons, HUD Installed, Ride Tunes, Full Electric Passenger Seat, Fbodfather signed, VIN # 4492, PAID OFF!!! 2010 Yellow 2SS/RS with black painted Stripes...$37,000.00; Ride Tones sound system and remote...$ 40.00; Seeing the kids faces (Young and Old) light up and almost wet their pants....Priceless!!! |
09-29-2014, 10:03 PM | #8 |
09-30-2014, 11:23 AM | #9 |
Envy
Drives: 2011 SGM 2SS/RS - Black hood/hockey Join Date: Aug 2011
Location: Renton, WA
Posts: 915
|
It's an easy enough fix to put the original bolt back in, but I'm curious what the new bolts look like. The one in my seat is a torx head bolt (like this: http://myword.info/images/t_drive_1b.jpg), and to get to it, you must remove, or partially remove, a plastic shroud from the lower part of the seat to expose the rail on the driver's side. There was one screw on the back side of it, if I remember correctly, with the head of the screw facing the rear seats. The rest just popped off. Be careful though, as there are metal clips that snap into the seat assembly and if you pull too hard on the shroud, you could pull the clip out from its slot in the plastic. This did not happen to me, but I am familiar with this type of clip as the Camaro uses lots of them.
I didn't take off the plastic part all the way as the front of it is held on by the power switches and I didn't feel like tearing everything apart, but I got it to the point that I could move the plastic shroud out of the way enough to get a screwdriver in there to replace the bolt. The height adjuster is a long powered screw with a hole at the end of the piston rod. I had to adjust the height a little bit to get it to align with the hole on the seat frame, but once I found where it's supposed to reattach, it was a simple enough fix. I'm not sure why mine would have come out as I never adjust the height and it's always at the lowest possible height setting. I guess that's why it's called a defective part. If it happens to you, the seat will raise up every time you get out of the car since there are springs or something that pull the seat upward, and the height adjuster screw isn't there to hold it down anymore. Last edited by ForgedReality; 09-30-2014 at 11:38 AM. |
09-30-2014, 02:32 PM | #10 |
Drives: 2013 Camaro RS Join Date: Dec 2013
Location: Renton, WA
Posts: 22
|
I haven't gotten the notice yet. I wonder if they will also do the key thing if I take my car in for this too?
|
10-01-2014, 06:23 AM | #11 |
Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,522
|
I got this for my 2011 Equinox, but not my 2013 Camaro. I suspect it's just something to do with certain years.
__________________
|
10-31-2014, 12:53 PM | #12 |
Drives: 1969 SS Join Date: Apr 2013
Location: Everywhere
Posts: 26
|
Yep,.. just got mine yesterday for my 2011
Recall 14271 |
01-03-2015, 01:23 PM | #13 |
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
got the second letter today saying the parts for the recall are now available, only problem is my Car is docked til spring so will have to wait at least 2-3 months
__________________
Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint |
|
|