MBRP Performance Exhaust

[Top Thrill]

Sounds great. I want one for my V6.

[DevilKnightFalcon]

I ordered directly from Jeff at MBRP. Mine will be in the first set that ships out this week. He extended me the same forum discount that is offered to 5thGen members. Can't wait for it to come in!!

[DevilKnightFalcon]

Originally Posted by Mikey @ BMC Performance

We will soon have pricing information for the V6 MBRP kits both in 304 and 409 stainless. I have just spoken with MBRP concerning these to find out when they will be shipping. They are hoping to have these start shipping by the end of next week, and we should have pricing on these soon.

Thanks!

I was told by my contact at MBRP that production wrapped up end of last week and that the first ones will ship on Tuesday/Wednesday of this week.

[BMC Performance]

I will make sure we get the straight scoop from MBRP tomorrow morning. We are just waiting on their pricing for the V6 systems and will have the group buy out for you ASAP after that. I'm sorry for the delay, but we were told the V6 kits weren't ready yet and they haven't given us pricing.

97one, I will have Mikey get that information for you tomorrow. Sorry that question was missed previously.

Thanks,
Lisa.

[Primus]

Originally Posted by DevilKnightFalcon

I was told by my contact at MBRP that production wrapped up end of last week and that the first ones will ship on Tuesday/Wednesday of this week.

How much?

[az5thgen]

Can you put me on the group buy list also?

Thanks

[CamaroDreams07]

Interested in the group buy too. If I can wait that long until this gets set up. Got a quote from MBRP directly for $931.48 to my door for the 409. I'd like to see what kinda deal we can get on this group buy.

-Matt

[CamaroDreams07]

Originally Posted by BMC Performance

I will make sure we get the straight scoop from MBRP tomorrow morning. We are just waiting on their pricing for the V6 systems and will have the group buy out for you ASAP after that. I'm sorry for the delay, but we were told the V6 kits weren't ready yet and they haven't given us pricing.

97one, I will have Mikey get that information for you tomorrow. Sorry that question was missed previously.

Thanks,
Lisa.

They posted the pricing on 5GO all the way back on the seventh. And I've talked to them directly to confirm. Not sure why they are takign so long to get the info to you.

http://www.moderncamaro.com/forum/sh...t=16080&page=3

Fourth post down I think.

[JesseJames]

Originally Posted by CamaroDreams07

They posted the pricing on 5GO all the way back on the seventh. And I've talked to them directly to confirm. Not sure why they are takign so long to get the info to you.

http://www.moderncamaro.com/forum/sh...t=16080&page=3

Fourth post down I think.

Lisa just got p-i-m-p-e-d :( Probably a coworker holding out info from her to weezle his way into a date, not like i would ever do such a thing

[homerlex]

Sounds pretty good. According to the MBRP site the install is simple and just takes a few hand tools.

If this is the case and the group pricing is attractive then I'd consider this for my V6 (hope the car arrives this week)

[CamaroDreams07]

Originally Posted by homerlex

Sounds pretty good. According to the MBRP site the install is simple and just takes a few hand tools.

If this is the case and the group pricing is attractive then I'd consider this for my V6 (hope the car arrives this week)

This is the case. I have talked to them about this as well. You are gonna need a 15mm deep socket, a flat head screwdriver and some WD-40. Well and obviously some jackstands or a lift. Here: http://www.planetlsx.com/tech/How_To...0_Camaro_SS/95

He says the V8 and V6 bolt up the exact same so there's all you need.


Man MBRP should pay me for conveying all this to you guys

[homerlex]

Originally Posted by CamaroDreams07

This is the case. I have talked to them about this as well. You are gonna need a 15mm deep socket, a flat head screwdriver and some WD-40. Well and obviously some jackstands or a lift. Here: http://www.planetlsx.com/tech/How_To...0_Camaro_SS/95

He says the V8 and V6 bolt up the exact same so there's all you need.


Man MBRP should pay me for conveying all this to you guys

Thanks - I think I can handle that install

The T304 is looking pretty sweet.

[BMC-Mikey]

I have just spoken with Steve at MBRP concerning the V6/V8 Kits.

He has told me the V6 Kits are coming off the Benders now and there will be no way they will ship before Wednesday of this week. They are pushing to start shipping Wednesday, the latest will be the end of the week.

We have pricing on all MBRP kits.

You will notice the V8 kits are a little higher now. MBRP did have an intro price going on, but they are up to everyday pricing as of today.

Originally Posted by 97one

Kris,...............
Below is a copy from my #26 POST on 8/10/09 :

So, I am Now intrested in this V6 system, I also like the group buy Discount thing.
I saw your V8 system Photos & liked them !...Questions =

#1 When would the V6 system be shipped ?
#2 What is the OD of the tubing for the V6 ?..............V8= ?
#3 what is the OD of the V6 tips ?............................V8= ?
#4 Can I see actual PHOTOS of the V6 system ? ..... If so Where ?

AS of NOW 8/15 I received NO answers.
I would think you SHOULD have answers on #2 & #3 Questions by NOW.
Thanks

To answer your questions per my conversation with Steve at MBRP:

#1 - By the end of this Week MBRP should start shipping the V6 Camaro Kits.
#2 - OD Size for the V6 - 2.5". OD Size for the V8 - 3.0"
#3 - OD Size on Round Tips (on both V6 & V8) - Steve needed to check on this, he said it was either 3.5" or 4".
#4 - Photos of the V6 kit will be available once the kit is out of production by the end of this week.



Be sure to watch for the group buy information by this afternoon!

[Mojave]

Standing by