CGM lowered and sleek - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ljustin293 · 08-16-2009, 11:33 AM

nice

*mlee* · 08-16-2009, 04:01 PM

Quote:

Originally Posted by corvettecamaro

Your not old school. We all have different styles and uses for our cars. I have 4 vehicles in my garage and this camaro is for a little cruising around town and car shows. So I need the stance for looks. But I also drive it around the canyons, and with it lowered...it just hugs the road.

I sort of put the Coilovers on the bottom of my mod list since I'm not sure I want to lower it much and want to make sure I have room for wider wheels. Back in the 70's we were putting on the 50s and jacking the car up. LOL

I must say this is without a doubt one of the nicest CGM cars I've seen so far, if not THE nicest. I'm have a guy lined up to do my bowties like yours and also some under the hood CGM paint too. Those wheels are absolutely sick.

Nice clean build...

ShnOmac · 08-16-2009, 04:07 PM

Quote:

Originally Posted by mlee

I sort of put the Coilovers on the bottom of my mod list since I'm not sure I want to lower it much and want to make sure I have room for wider wheels. Back in the 70's we were putting on the 50s and jacking the car up. LOL

I must say this is without a doubt one of the nicest CGM cars I've seen so far, if not THE nicest. I'm have a guy lined up to do my bowties like yours and also some under the hood CGM paint too. Those wheels are absolutely sick.

Nice clean build...

Pedders will be announcing a package sometime soon I hope....
They got 305 on all four corners with their suspension.
Check this thread
http://www.camaro5.com/forums/showthread.php?t=37333

jdurhan · 08-16-2009, 04:13 PM

Looks HOT! Well done.

*mlee* · 08-16-2009, 04:14 PM

Quote:

Originally Posted by shnomac77

Pedders will be announcing a package sometime soon I hope....
They got 305 on all four corners with their suspension.
Check this thread
http://www.camaro5.com/forums/showthread.php?t=37333

That's what I'm talkin about!!!! Tks

ShnOmac · 08-16-2009, 04:16 PM

Quote:

Originally Posted by mlee

That's what I'm talkin about!!!! Tks

Notta prob... thats what were all here for!

68RS · 08-16-2009, 04:46 PM

Looks good. Did you paint or cover the bowties?

corvettecamaro · 08-16-2009, 04:48 PM

Thanks for all the positive responses to my vehicle. I would like to get 305's on the back too, but that would mean changing my wheels. I like the stock look of the camaro wheels. If they would make wider stock wheels with the right offset, then i'm all for it. Thanks again.

corvettecamaro · 08-16-2009, 04:49 PM

Quote:

Originally Posted by 68RS

Looks good. Did you paint or cover the bowties?

I had that made. My buddy owns a shop and did me a favor of doing a carbon fiber center. I did not pay anything so i don't know what it would cost. I like the carbon fiber since it matches the color of the car.

corvettecamaro · 08-16-2009, 04:58 PM

If any wheel company would like to sponsor my vehicle for 21" wheels I wouldn't mind. I'll let my vehicle be the guinea pig for 21" aftermarket wheels. Just thought I'd try.

*mlee* · 08-16-2009, 05:01 PM

Quote:

Originally Posted by corvettecamaro

If any wheel company would like to sponsor my vehicle for 21" wheels I wouldn't mind. I'll let my vehicle be the guinea pig for 21" aftermarket wheels. Just thought I'd try.

If you like the Stock wheels then maybe these LS7 11" wheels are your ticket.
http://www.camaro5.com/forums/showthread.php?t=36214

GJG · 08-16-2009, 05:02 PM

carbon fiber center looks great....suprised no one is selling one!

I will lower mine an inch...maybe 1.5. 3 makes the wheels/tires sit too high in the wheel wells for my taste.

corvettecamaro · 08-16-2009, 05:03 PM

Quote:

Originally Posted by mlee

If you like the Stock wheels then maybe these LS7 11" wheels are your ticket.
http://www.camaro5.com/forums/showthread.php?t=36214

Wow those are nice. Do they sell those? That's really nice. Thanks man.

Ject · 08-16-2009, 05:06 PM

Looks good.. I personally would have dropped it 1/2 that.

08-16-2009, 04:58 PM	#38
corvettecamaro Drives: 2010 Camaro, 2007 Corvette Z51 Join Date: Jul 2009 Location: canyon country Posts: 111	wheels If any wheel company would like to sponsor my vehicle for 21" wheels I wouldn't mind. I'll let my vehicle be the guinea pig for 21" aftermarket wheels. Just thought I'd try.

08-16-2009, 05:02 PM	#40
GJG Drives: 2SS Join Date: Apr 2009 Location: Beaumont, Tx Posts: 871 View My Garage	carbon fiber center looks great....suprised no one is selling one! I will lower mine an inch...maybe 1.5. 3 makes the wheels/tires sit too high in the wheel wells for my taste. __________________ Sleep well America.....my MARINE has your back......

08-16-2009, 05:06 PM	#42
Ject aka Patrick Drives: '10 Camaro 2SS '04 Silverado Join Date: Jan 2009 Location: Derby Kansas Posts: 3,072	Looks good.. I personally would have dropped it 1/2 that. __________________ Current Modifications: Your average Bolt-ons & Suspension Upgrades GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft

08-16-2009, 11:33 AM	#29
ljustin293 Drives: 2010 VR CAMARO 2SS/RS Join Date: Aug 2008 Location: GA Posts: 15,060 View My Garage	nice

08-16-2009, 04:13 PM	#32
jdurhan Drives: 2017 SS 50th Conv., 2016 Siverado Join Date: Sep 2007 Location: fort lauderdale Posts: 457 View My Garage	Looks HOT! Well done.

08-16-2009, 04:46 PM	#35
68RS Drives: '68 327 RS, 2010 2SS/RS Join Date: Aug 2006 Location: Grapevine, Texas Posts: 584	Looks good. Did you paint or cover the bowties?

08-16-2009, 04:48 PM	#36
corvettecamaro Drives: 2010 Camaro, 2007 Corvette Z51 Join Date: Jul 2009 Location: canyon country Posts: 111	Thanks for all the positive responses to my vehicle. I would like to get 305's on the back too, but that would mean changing my wheels. I like the stock look of the camaro wheels. If they would make wider stock wheels with the right offset, then i'm all for it. Thanks again.