Check this out!! Z28 Style front splitter for 2010-2013 Camaro SS cars @ RPI Designs! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RPIDon · 11-11-2014, 09:33 AM

Quote:

Originally Posted by 35th02ss

If I'm reading this right it does not come with any harware to install.

It does come with the hardware to install it on your front bumper, what it does not include is any support to brace it in case you are going for high speed runs. If you are planing on driving speeds of 120 mph plus then it is suggested to put in some vertical bracing in to support the front splitter like you see with other aggressive splitters on the market. Thanks, Don

olblue75 · 11-13-2014, 06:53 AM

Kind of hard to tell but is it textured like a factory 1LE or ZL1 Splitter and does it require paint looking for the stock look of the after mentioned splitters...

Black Knight · 11-14-2014, 09:21 PM

Any plans for the v6 bumper ?

RPIDon · 11-17-2014, 04:08 PM

Quote:

Originally Posted by olblue75

Kind of hard to tell but is it textured like a factory 1LE or ZL1 Splitter and does it require paint looking for the stock look of the after mentioned splitters...

Thank you for asking, it is more of a smoother finish, getting in painted flat black will give it more of the factory look. Thanks, Don

RPIDon · 11-17-2014, 04:10 PM

Quote:

Originally Posted by Black Knight

Any plans for the v6 bumper ?

Hi Black Night, At the moment there are no plans. Sorry, Don

ZLWonton · 11-22-2014, 01:27 AM

Will this splitter fit the 2010-2013 zl1 front bumper? If not, do you have plans on making one?

Splat · 11-23-2014, 09:25 AM

Just received mine.

Trying to find time to install it today.

I was thinking about how this lip should not be used over 120mph unless the splitter had more support to it.

I found this, something you should consider making and maybe selling it separate, or as a set.

http://www.camaro5.com/forums/showthread.php?t=364367

Ryanbabz71 · 11-23-2014, 10:18 AM

That looks nice. Wish I didn't have a ZL1 style already

Ryan

jhall8832 · 11-26-2014, 01:31 AM

Has anyone posted pictures????? Will this fit a 2014 SS

RPIDon · 11-26-2014, 09:09 AM

Quote:

Originally Posted by jhall8832

Has anyone posted pictures????? Will this fit a 2014 SS

Thank you for asking, we have test fitted it on the 2010-2013 V8 cars, we have not had the opportunity to check it out on the 2014 -2015 V-8 cars but from what we can tell there are some difference between the 10-13 to 14-15 cars that would not make it work on the 2014-2015 cars. Thanks, Don

justjoshin · 11-29-2014, 09:44 AM

what is this splitter made of (polyurethane, polypropylene, fiberglass)?

DaFisch · 12-04-2014, 12:21 PM

Do you guys have pictures yet? I will be installing mine next week

RPIDon · 12-05-2014, 09:48 AM

Quote:

Originally Posted by justjoshin

what is this splitter made of (polyurethane, polypropylene, fiberglass)?

The front splitter is made out of fiberglass.

Quote:

Originally Posted by DaFisch

Do you guys have pictures yet? I will be installing mine next week

No pictures as of yet, as soon as we get them we will start posting them on this thread.

NoleLife · 12-10-2014, 12:05 PM

I saw the post from Splat on the 23rd saying he received his. Does no one have pictures with this mounted on their car?

11-14-2014, 09:21 PM	#17
Black Knight Drives: Supercharged LLT Join Date: Aug 2012 Location: San Antonio, Texas Posts: 1,437	Any plans for the v6 bumper ? __________________ CLICK IMG FOR BUIlD THREAD

11-23-2014, 09:25 AM	#21
Splat Drives: 2012 1SS M6 IOM Join Date: Dec 2012 Location: New Rochelle New York Posts: 1,428 View My Garage	Just received mine. Trying to find time to install it today. I was thinking about how this lip should not be used over 120mph unless the splitter had more support to it. I found this, something you should consider making and maybe selling it separate, or as a set. http://www.camaro5.com/forums/showthread.php?t=364367 __________________ 2012 1SS Camaro LS3 Inferno Orange Mods: LSA Supercharger, 2.55 Pulley, Custom Boost Cam, ARH LTH 1 7/8, HFC, 3' Magnaflow Exhaust, JLT CAI, Elite CC V2, BO White Stage 2 TB, GM 3.91 Gears, DSS CF Driveshaft, BMR Bushing Kit.... . Tuned by JTM Motorsports 540 Hp 550Tq on 9PSI Axles, Monster Clutch, Hotchkis TVS Track Pack kit.......For 2018. Last edited by Splat; 11-23-2014 at 10:20 AM.

11-23-2014, 10:18 AM	#22
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,371 View My Garage	That looks nice. Wish I didn't have a ZL1 style already Ryan __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

11-29-2014, 09:44 AM	#25
justjoshin Drives: 2010 SW 1SS L99 Camaro Join Date: Aug 2011 Location: Louisiana Posts: 2,085 View My Garage	what is this splitter made of (polyurethane, polypropylene, fiberglass)? __________________

11-13-2014, 06:53 AM	#16
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,155	Kind of hard to tell but is it textured like a factory 1LE or ZL1 Splitter and does it require paint looking for the stock look of the after mentioned splitters...

11-22-2014, 01:27 AM	#20
ZLWonton Drives: 2014 ZL1 BRM Join Date: Dec 2012 Location: Orlando Posts: 800 View My Garage	Will this splitter fit the 2010-2013 zl1 front bumper? If not, do you have plans on making one?

11-26-2014, 01:31 AM	#23
jhall8832 Drives: 2014 Camaro SS Join Date: Apr 2014 Location: United States Posts: 5 View My Garage	Has anyone posted pictures????? Will this fit a 2014 SS

12-04-2014, 12:21 PM	#26
DaFisch Master Amateur Mechanic Drives: Victory Red 2011 2SS/RS Join Date: Jan 2013 Location: South Barrington, IL Posts: 1,719	Do you guys have pictures yet? I will be installing mine next week

12-10-2014, 12:05 PM	#28
NoleLife Drives: 2013 2SS M6 Join Date: Oct 2012 Location: Tallahassee, Fl Posts: 205	I saw the post from Splat on the 23rd saying he received his. Does no one have pictures with this mounted on their car?